<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
Hi.I need some software for simulation and verification of my G code programs. I´ve a mill/turn center with dual spindle , 1 turret and 1 milling head.What are you guys using , what are you recommend , and what are you NOT recommend ? I´ve already looked at NC Simul which I think is VERY expensive. I also looked at Vericut , but I see that some of you has replaced that ? We are on Creo 3 M30 (on our way to M90)Br,Jesper..This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
In late April I learned that 3D Systems had discontinued their Cube 3 personal 3D printers.They come in white (392200) and gray (391100).I won the eBay bid at under $400 for a new printer with free shipping. Within a week I was printing parts.Funny enough, when the printer got here, I was printing parts for work within 3 hours. The real slowdown was due to trying to find the activation button on the redirected web page. Phone support was able to help in quick order even on a Saturday. D'oh! ...the tab was right there staring at me.There are three reasons I justified this printer:It is a dual extruder.70um resolution option.Wash-away support material.Price helped pull the trigger, of course, but this is not just an economy printer. It may well be the opposite as it does use proprietary cartridges. And everything I read is that this is a very difficult remaining filament tracking module to defeat. Reports of clogged cartridges are also not
Hey everybody,When i place ejectors using EMX, the cut which is generated is always very close or coincident with the ejctor shaft. See pic:This makes it difficult to add a champfer in the hole.I would like the distance from center of ejector to rotfix surface to be bigger. See below pic:Where can i find the parameter file, from which i can increase this distance??Best regards ClementCreo3.0 M040EMX9.0 F012This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Here is a Product idea in case anyone wants to vote it up. Would be nice if we could categorize them as manufacturing instead of generic Creo.Order regions in Volume MillingThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello EMX Community,I would like to share this EMX 9 Best Practice PDF with you.It was created for a reseller conference, but there are interessting topics described which are also useful to share with other users.If any questions occure please feel free to contact me.Regard ThomasThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello All,I want to simulate cylinder with motion skeleton. If I select line, it will change to specified stroke and will simulate like the way machine. Please find below snap for better understanding. Please help me.Thanks,JituThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello Community, Is it possible to have different layer state for a part/assembly and its associated drawing. For instance, I have a manufacturing file with many milling windows. I have created a layer driven by a rule to isolate these. I would like to hide milling windows in my manufacturing document for the workshop, and keep these milling windows displayed in the manufacturing assembly.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I am using Creo 3.0 to make program for CNC machine, but Local milling is not work with Volume milling! How to fix it? (How can I use Volume milling to replace it?)This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Our Milltronics post processor is writing the feedrate to almost every line. It looks something like this:N00058G3F8.X.6895Y.1057I.0197J-.0035N00060G1F8.X.9139Y.0662Z.13While our FADAL posts something like this for the same partN0280G3X.6895Y.1057I.0197J-.0035N0290G1X.9139Y.0662Z.13Where is the "toggle" in the Gpost generator to turn writing the feedrate to each line on and off?I cannot seem to locate it.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Pro-nc , how to enable machine play optionThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Will EMX have transversal moldbases?Usual moldbase (oblong):Transversal moldbase:This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I need your helpThe standards of the Mold Base in the Brazil are different of the European suppliers.How do I create a copy of the complete mold base (eg Futuba) and change the dimensions?(Example: Distance between columns, distance pin return, etcetera). You would have any instruction or video material to help me?Thank you for your helpThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I have installed PTC Creo on a virtual machine in Hyper V, Windows Server 2012 r2, and then I connect to the VM through Windows Remote Desktop. It works fine when I run it locally on the server but it won't work when I remotely connected to the VM. Anyone that have had this problem and found a solution for it or doesn't exist a solution for the problem? I've attached a picture of the failure down below.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hi everybody,Anybody knows how to add transparent colors to the technology colors?Best regards ClementThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Aktually GPost it´s not possibly to create GPost fils with a file extension with more than 2 numbers. An example for the actuell format is: uncx01.f01 In our company we have more than 99 machines therefore a problem with GPost. The Idea is to extend the possible numbery, maybe to 4. I refer to call 12999549This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I had a part with 4 of the same cuts in it so I programmed the first 1 then Mirrored it to the second third and 4th location then ran play path and everything cut fine. I then ran Module works and it showed the cut cutting outside of the windowed cut so I turned in a case about module work showing gouges or collisions where play path didn't. I started a support case#13023191 where Module Works gouges and play path doesn't ModuleWorks ImageActual part cut imageI wasn't sure which to trust. So now the issue goes to why is play path not showing the proper tool path?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I get an error while trying to get the G-Code of a machining operation.I have the uncx files saved in the correct folder.I have done the same procedure on other computer and i dont have this problem.what could i do to fix this issue?Thank you for your helpThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
How or where to find the parameter that controls the automatic generated champfer inside the assembly definition in EMX? I would like it to be visible always when i build up a moldbase using EMX.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I ran into another simulation problemabove is a picture of Vericut sumulation in Creo 2above is the same program in Creo 3 with ModuleWorks. Note the gouging going on. It does the same gouging on the drill, chamfer tool and tap. I've run this program on a machine and it does not gouge. It runs on the machine the same as the Vericut simulation.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
It's on the inside of a cylinder - not the outside.It will be a mold, get it? the inside will be the outside of the part - derp.Any suggestions? I've had no success whatsoever or I would not be asking.Thanks,VinceThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I am having trouble with my speed not posting properly. I programmed the speed at 10000 and it posts at 0, if I program speed to 9999 it will post ok. I am thinking it is something with the post not anything to do with Creo. I have looked at the max machine rpm and it was set to 10000 and I changed it to 12000 to see if that would help but it did the same thing. I don't know a whole lot about the posts so I am afraid to mess with it to much. Has anyone run into this problem? Thanks Bernie This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I need help clearing this EXCEPTION_ACCESS_VIOLATION. I am not sure why it is happening. The assembly I am trying to open when getting this error worked fine last week.-------------------------------------------------The trace creation timestamp is: Tue Apr 26 10:52:56 16The executable build timestamp is: Thu Oct 09 11:28:32 14The datecode is: 2014350The pro machine type is: x86e_win64The process ID is: 4488The traceback type is : CRASH-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 5900.Thread 5900=====================0x0000000142159079 NULL (NULL:0) (xtop:0x000000013FB30000) ( 0x42, 0x729, 0x648fa7c0, 0x403bc574 ) 0x00000001420D2448 NULL (NULL:0) (xtop:0x000000013FB30000) ( 0x0, 0x0, 0x729, 0x0 ) 0x00000001420D23F9 NULL (NULL:0) (xtop:0x000000013FB30000) ( 0x648fa7c0, 0x729, 0x7b4f7f48, 0x648fa7c0 ) 0x00000001420CEA4B NULL (NULL:0) (xtop
Recently we had a successful bid for procuring 5 axis (simultaneous) CNC machining centre. Hurco’s VM10Ui with Winmax9 controller was commissioned in Jan 2014 at the University of the West of Scotland. The controller can interpret Fanuc NC code. It supports Tool Centre Point Management with M128 and G41.2. (view in My Videos)
I am trying to get the text from the PPRINT to come after the tool change and just cant seem to figure it out. I can get the Tool Name to go there (I've gotten the Tool Offset Number there aswell) but I would really like it all there. Here is what I have now in the Cimfil section:CIMFIL/ON,PPRINT $$ starts on all PPRINTMESS = TEXT/CLW $$ extract the text of the PPRINTTESTV=TEXT/'TOOL NAME'$$ Value to test forRSLT=INDXF(MESS,TESTV)$$ Test if TESTV is in MESSIF(RSLT.EQ.0) THENPPRINT/MESS $$ process the PPRINTELSEOKTOOL=1 $$ flag tool name programmedTOOLNM=TEXT/MESS $$ store tool nameENDIFCIMFIL/OFF $$ end of CIMFIL on PPRINT CIMFIL/ON,LOADTL $$ starts on all LOADTLDMY = POSTF(20) $$ save current CL recordIF(FTOOL.EQ.0) THEN $$ check if first tool changeFTOOL=1 $$ reset the flagSEQNO/OFF $$ stop sequence numberingSEQNO/10,INCR,10 $$ restart sequence numberingENDIFDMY=POSTF(21) $$ restore saved record (LOADTL)DMY=POSTF(13) $$ process LOADTLIF(OKTOOL.EQ.1) THENOKTOOL=0 $$
Running Module works my ball end mills and bull nose end mills look like chamfer mills ?Any one else seen this? the picture below is a .0625 ball end mill.This picture is a .125 .020 corner radius tool that looks like a chamfer mill.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.