<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
So I have a quick questions... I know you can have multiple builds of Creo on a single machine, but can you share files between those builds? We are currently on Creo 3.0 M100 and need to upgrade to M120 to resolve a couple issues. In doing so, we will need to delete and create new workspaces within Windchill. I have a couple users who have large projects that aren't really on the server yet, or going to be on Windchill in multiple workspaces, so it would be a great help if I could leave them on M100 for a bit and upgrade the rest to M120. Not sure if this will work or not, just looking for some input. Thanks
I am sure this information is somewhere but I can't find it. Changes for lots of other things but not CAM.Josh
Creo Parametric Help CenterI hope a lot of effort was put into refinement, because the new features don't look all that exciting.Josh
Good Morning/Afternoon/Evening.I've purchased and installed Creo 3.0. I've also purchased Creo N/C complete machining.Is there a good quick start manual explaining which directory the config.pro should be placed and is there suggested settings for standardmodeling and manufacturing?I should have copied a config.pro from a previous employer.Thank you,Jay.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
how to save post processed programme with complete information i.e. offset surfaces, cutter used etc. for future use.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
hi,Can you please help me to simulate the cutter compensation error before taking to the machine.If there is an error this should be highlighted in the simulation.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
where from i download it Expert Moldbase Extension - EMX plz help me and how to get in creo plz help meThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Good day everyone,Emerging technologies such as Augmented Reality (AR) and IoT are supporting an evolution in product development and with Creo 4.0 you're connected to that future.Creo 4.0 makes design smarter with the tools to:Connect your digital designs to physical productsEnable design for additive manufacturing in a single systemSimplify model based definitionIntegrate AR directly into design environment with the push of a buttonPlease use this link to register and learn more!Best,TobyThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello All,Would anyone else find it useful to 'gather' elements in the Post Processor and determine useful statistics such as Average Stress?atbThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Will the production machining option in Creo give me the ability to post process my models in manufacturing mode to a .tap file. Will it also post process to g-code and does it come with the basic drivers to post to g-code?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I am a student at the local community college, and I was wondering what computers were being used for your Creo industry and classroom usage. Any help would be appreciated. If you can help, I am looking for the CPU, RAM, Graphics Card, and SSD or HD information. What would you recommend for a good machine for college replacement and why. They are looking at replacing the current systems.All help will be appreciated. This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
hi,for all my NC program I get feed rate as F1 even though I enter as Cut_feed = 100, can anyone please suggest what change to be made in GPOST.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Join us for the exciting launch of Creo 4.0 and be the first to witness the new capabilities in the areas of Model Based Design, Additive Manufacturing, Smart Connected Design and more.On Tuesday, November 15, we are hosting PTC Forum Europe Online, a free broadcast experience that marks the official launch of Creo 4.0, with Creo breakout sessions livestreamed in real time from Stuttgart.The event includes free access to top-notch keynotes, customer spotlights and the opportunity for chatting with other attendees and submit questions to PTC presenters.Register today and add one or more of these five sessions to your calendar November 15:Introducing Creo 4.0In this 45-minute overview, Paul Sagar, Creo VP of Product Management, talks about the “groundbreaking capabilities available in Creo 4.0.” You’ll learn about new tools for model-based definition; additive manufacturing; and smart, connected design; as well as productivity improvements. If your time is limited and you want to l
In previous Creo versions there was a cutom trajectory button that is no longer visible in Creo 3.0. We use custom trajectory with curves to drive toolpath and take multiple depths of cuts.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
We are using CREO 3.0. We have 1 machine that when you try to embed an object using create from file ( bitmap picture) a block with the word OLE is placed on the screen. When creating a new object, the Microsoft Paint shows up and if we paste a picture in it, the same block shows up. However when you put your mouse on the block, the picture shows up. Any suggestions to this?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Dear all ,At end of Sequence I require following command "G0G80G90Z100.0M05M09" , Currently for every sequence I add CL command INSERT/G0G80G90Z100.0M05M09.Can this be done in post processor , like how we add for start and end program using "Start/End of Program".Can you please suggest best method to handle the End of Nc sequenceThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I was shown a toolpath today, created in MasteCAM, that oscillates in z with options to create either a sine wave or peaked path. In this case it was being used to cut a laminate and avoid heating up the tool so much. Other than sketching the path, is there any way to create this in Creo?Josh This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello all,I'm transitioning to Creo Manufacturing and having a few problems with my post processing. Here is the main issue:The controller I am using is an Anilam 6000M.When I post-process a CL file for drilling, I get this as an output:G81 X-4.1791 Y-2.5 Z-.0709 R.0787 F.138X4.1791Y0.X-4.1791Y2.5X4.1791G80I need it to be in a format without the X x.xxxx Y x.xxxx coordinates on the same line as the G8x call out.They need to be on the line following the G8x call.G81 Z-.0709 R.0787 F.138 X-4.1791 Y-2.5X4.1791Y0.X-4.1791Y2.5X4.1791G80The point is listed in the CL data following that line.RAPID FROM / -106.1500000, -63.5000000, 10.0000000$$-> SETSTART / -106.1500000, -63.5000000, 10.0000000CYCLE / DRILL, DEPTH, 1.800000, MMPM, 3.500000, CLEAR, 2.000000GOTO / -106.1500000, -63.5000000, 0.0000000GOTO / 106.1500000, -63.5000000, 0.0000000GOTO / 106.1500000, 0.0000000, 0.0000000GOTO / -106.1500000, 0.0000000, 0.0000000GOTO / -106.1500000, 63.5000000, 0.0000000GOTO / 106.1500000, 63.50
Hi there,I am currently setting up a 3-Axis DNM Doosan 500ii with a Siemens Sinumerik 828D Control and Creo 3.0 as the CAM softwareI am having some issues with the output G-Code concerning the tool Change. At the moment I get:N9 M5N10 T9 M6N11 S4000 M3with T(Position Number)What I Need is:N9 M5N10 T="Tool Name" M6N11 S4000 M3is there anyone that could help me?Thank you!This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Had some free time to work on this today. Source linkI created a curve by equation and used that to drive a trajectory milling sequence for some long slots I needed to mill.here is the equation I used to create this curve./* ENTER TOOL STEP OVERSO = 0.05/* EMPIRICAL VALUE TO CORRECT SHAPE ERRORSF = 0.0175/* ENTER PROFILE ALLOWANCE (STOCK)PA = 0.005/* ENTER TOOL CUTTER DIAMETERCD = .3937/* ENTER SLOT WIDTHSW = 0.811977/* ENTER NUMBER OF REVOLUTIONSN = 100A = ( ( SO * SF ) / 3.141592654 ) / 2B = ( ( SW - ( 2 * PA ) ) - CD ) / 2x = ( A * ( t * N * 360 )) - ( B * sin ( t * N * 360 ) )y = ( B * cos ( t * N * 360 ))z = 0I don't understand what the shape error value is about but it seems to work for this application. Just thought i should share this with everyone in case they wanted to use it or improve it This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference
dear; As per our company IT policy we are unable to move files like cgtpro60 to the server , Each and every time when we check the tool path simulation with very cut ,cgtpro60 file creates , so after completing a project, I have to go to each folder and remove above mentioned file to move CAM data to the server. could you please help me on this ?please check the attached file for more info. This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Anybody else seeing this? Any idea how to fix?Volume rough, using constant-load, the helical entry generates goto points only(cl data) resulting in linear moves when posted. Changing to follow-hardwalls or spiral and the helical entry becomes of series of circle commands (cl data) resulting in arc moves when posted. There is a huge difference in program size and readability.Josh
Need some help.
My Monday morning annoyance with Creo is with the way I rough large diameter bores. I generally use a mill window with a helical ramp into the part. Then do a spiral rough tool path out to the required diameter with stock left on the profile.This method seems really efficient to me but the major problem I have is I would like the end of the tool path to have a lead off amount to get the cutter off the wall for the retract out of the bore. I set all the parameters in the sequence for this lead off but I will not work.Picture of the tool path with the cutter retracting straight up the wall.what I have found is you need to go into the tool motion and manually add a lead out to get this to work at the end in order for the lead out to work even though the parameters are set.I think this is another problem with the software.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and ref
I have been using the constant_load tool path and now that the retract can be controlled I like it a lot. Except, when I change free_feed from rapid to some value to avoid the collisions Vericut is telling me I have, the 1st move after the tool change becomes a Direct (XYZ) move no matter what I select for a start_motion parameter. Does this mean more screwing around with the post or am I missing something else? ThanksJosh This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.