Recently active
Hi!Do you have any hardware requirement recommendations for kepware depending on connected PLC, tag number, and data change rate?For example, if we going to connect 500 PLC with 200 tags per PLC, and we need high read rates (1s, max 2 sec delay) for 10 tags per PLC, what are the HW recommended requirements for our KW server?(KEPServerEX v6.13 Manufacturing Suite) Thanks!
I have 3 infotables. How to export one excel sheet which having 3 sub sheets to add each infotable data in each sheet of excel. (or)How to export all 3 infotables in same file by differentiating each infotable separtely. Note: There is no common column present in all the 3 infotables.
I have a tag on a Molding press for Cooling Time that counts up and then zeroes out. I am writing the data to a database using a trigger called New Data Flag. When the new data flag kicks from 0 to 1 I write the data to the database. Unfortunately the cooling time tag is at zero when the new data flag changes over. So I think I can fix this by creating an advanced tag that will monitor the Cooling Time tag. I only want the advanced tag to update if the Cooling time tag is not zero. By doing this I will always end up with the last non zero value from the Cooling Time tag when the New Data Flag changes from 0 to 1. My assumption is that a derived tag may work but I am not sure how to setup the expression. Any help would be appreciated.
Hi,I'm new in Thingwvorx and java script.I'm trying to take a single text file and split it into chunks by a specified chunk size. In my example, trying to split a single file into 1MB chunks.Example;source file will be available in the Repository.File test.txt in repository is 5MB.chunk size mentioned is 1MBProgram need to split and create five new files in repository with each file have 1MB size.Please help me to achieve this.
How to make numeric entry widget non-editable?
I added wrong additional data to my data, and retrain it. How to delete the additional data without deleting whole data?
In ThingWorx v 9.3.9-b1648, developed a mashup with a bar chart widget to show the data and on-click of a single bar, it should pass the data the Navigation function of popup type. I believe there is a bug with Bar chart widget. However the bar chart widget doesn't seem to send the selected bar data as a mashup parameter to the Popup function. I've set the 'selectedMode' property to single, also tried with default and multiple modes. Whereas when using the Grid widget, the data is getting passed to the popup function as a mashup parameter. I've followed the below steps: Create a popup mashup and add mashup parameters to it, for binding it in base mashup.Create a base mashup, add bar chart widget and configure the widget properties accordinglyAdd data to the bar chart widget. Use a service that returns infotable type result, and the service will have "All data" and "selected row(s)" values. In the Base mashup, Add Navigation function with Popup
I have a gauge that I need to change the color of something based on if the value in the gauge is above or below a target value. The target value is constantly changing so it needs to be dynamic. I create different CSS classes, and then pass the class it should look at, but I am not sure how to properly write the CSS that would change the face of the gauge face, needle, or value color. Thanks! ThingWorx 9.3.8
Hi, Can anybody provide an overview of how to push notification from Thingworx server to Android devices? We are planning to integrate push notification to Android & Ios mobile devices whenever any events are generated on thingworx server.
I need to get Property Wise data for logged properties, I have tried to use QueryNamedPropertyHistory service but seems it is too slow, is there alternatives that may be i didn't tried ?We are using TWX Version 9.3.5.
I get data from Kepware in DWORD and want to show in mashup but doesn't show. How to solve it?
Now i got line chart like picture below but i want to modify something1.X-Axis that is a time didn't show full date2.On the right hand side, i want to edit sequence that L.33 is first one and then L.34 , L.35 respectively. Thank you
As per the original post. Hi willie. The following is my service, to upload my csvfile from repository to s3Bucket.But i am not able to upload it from my service. try { var FolderName = Company + " Stocks"; logger.debug("FolderName :" + FolderName); var ESSSIMDetailsFilePath = FolderName + "/" + Company + "_SIMDetails.csv"; logger.debug("ESS SIM DetailsFilePath :" + ESSSIMDetailsFilePath); // Content: BLOB var Content = Things["SystemRepository"].LoadBinary({ path: FolderName /* STRING */ }); var headers = { 'Content-Type': 'text/csv' }; // result: BLOB var result = Resources["ContentLoaderFunctions"].PutBinary({ proxyScheme: undefined /* STRING {"defaultValue":"http"} */ , headers: headers /* JSON */ , ignoreSSLErrors: undefined /* BOOLEAN */ , useNTLM: undefined /* BOOLEAN {"defaultValue":false} */ , workstation: undefined /* STRING {"defaultValue":""} */ , useProxy: undefined /* BOOLEAN {"defaultValue":false}
I am trying to read a tag using IoT Gateway.I am using POSTMAN as testing toolGET http://143.28.91.145:39320/iotgateway/read?ids=LPDASTTT.UPack_To_FDM_Alex.PO_Download.Init.ProductID.DATA/8 with no authentication gives me proper result,butGET http://143.28.91.145:39320/iotgateway/read?ids=LPDASTTT.UPack_To_FDM_Alex.PO_Download.Init.ProductID.DATA/8 with basic authentication and username Administrator and password (my Administrator password for KepserverEX) returns 500 internal server error. The version of kepserver is 6.11
Hi all,How to read the timezone in Thingworx? Thank you!
Looking for a way to send automated daily emails with the KPI Reports from RTPPM. I have a VP that does not want to log in to ThingWorx. What's the best way to accomplish this? I imagine I can create a service to do this but was curious if there was an easier to accomplish this (perhaps a "built in" feature of RTPPM?)
Hi Experts, Problem : A bar chart and a schedule each have a data set bound. These data sets are created dynamically. Therefore the number of series cannot be defined on a bar chart. (Consequently defining style formats for individual data series is not possible for the bar chart. ) Is it possible to give the same color to the bars that have the same name from the two different charts ?e.g.,Bar Chart: Apple_Series = Green, Banana_Series = YellowSchedule Chart: Apple_Series = Green, Banana_Series = Yellow Regards,
I want to fetch all records from the value stream. Value stream stores the 86400 records in one day. I used the QueryPropertyHistory() which gives me only 500 rows and if I define maxItems(Data points of 3 days) it gives me a script timeout error and I want to show this on the line chart. Or is there any limit to showing data points on a line chart?
How to install Thingworx extensions (RTTPM, DPM, AMU,CWC). I'm browsing the PTC help center to find out how to install the solutions, but I don't understand, as there is no step-by-step guide. I would like help and a description of how to install my ThingWorx is 9-4-1 step by step Translated by the Community Moderation using Google Translate Como instalar as extensões do Thingworx ( RTTPM , DPM, AMU,CWC) . Estou navegando para no help center da PTC para saber como instalar as soluções , mais não estou entendendo ,pois, não há um passo a passo. Gostaria do auxilio e uma descrição de como instalar passo a passo meu ThingWorx é 9-4-1.
Hi everybody, I have installed the tuneller KEPServerEX 6 version 6.5.829.0 and a weeks ago we are experimenting interruptions in the transmision of the data. I track the problem in the windows event viewers and I found this errors: Log Name: ApplicationSource: Application ErrorDate: 9/26/2023 12:16:47 AMEvent ID: 1000Task Category: (100)Level: ErrorKeywords: ClassicUser: N/AComputer: OPC_SVRDescription:Faulting application name: server_runtime.exe, version: 6.5.829.0, time stamp: 0x5b22a6cfFaulting module name: ge_ethernet_global_data.dll, version: 6.5.829.0, time stamp: 0x5b22a6dfException code: 0xc0000005Fault offset: 0x000245e8Faulting process id: 0xa48Faulting application start time: 0x01d9efa794a04a0aFaulting application path: C:\Program Files (x86)\Kepware\KEPServerEX 6\server_runtime.exeFaulting module path: C:\Program Files (x86)\Kepware\KEPServerEX 6\drivers\ge_ethernet_global_data.dllReport Id: c70f0f78-fd9b-4a8f-9cf8-92e647f4b643 Thi
Hi all, When I try to access the Mashup Runtime using a non-administrator account, I get the below error message I tried following the article Article - CS289125 - Error getting IR status in Application logs when non-admin users try to access Thingworx Mashups during runtime (ptc.com) Setting Permissions for Integration Connector Activities (ptc.com) Still, I'm getting an error Could someone help me with this Thanks in advance /VR
Hi, I have one property for which I log data for every second in valuestream. I want to display last 3month data from valuestream on time series chart. What is approach I need to use?I am new to Thingworx. Please help.
While fetching data from sql db in thingworx , this query executing for morethan 80 seconds. Any idea on simplifying this query? Query:SELECT distinct a.cmp , a.engseq , a.it, null as COUNTFROM ENGINEERING a WHERE a.MODEL like 'R24R%' AND a.cmp not in ( select cmp from ENGINEERINGwhere MODEL like 'R23R%' ) ;
Dear Community,yet another question for you; regarding the Beckhoff TwinCat driver;I only want to import OPC Variables which I have marked/commented in TwinCat.I commented them as intented for the OPC-Import:(*~ (OPC:1:available for OPC Clients)(OPC_PROP[0005] : 1 : read only)*)Unfortunately, when I import the device with"Respect OPC Read/Write Item Properties", "Respect Tag Case On Import" and "Only Import Variables Marked for OPC" enabled no tags at all are created.Why? Am I doing something wrong? I do not have any additional filters configured.Thanks in advance for your help.Kind regards,Kepware User
I need to make a SQL query in Thingworx. The query should read (if I were creating it directly): SELECT * FROM MyDB.MyTable where Name like '%Name_Input%' Another PTC forum post had recommended this as a possible solution: SELECT * FROM MyDB.MyTable where Name like '%' || [[Name_Input]] || '%' But this query (above) does not work. The post was from the year 2014 and I'm currently using 8.4.1, so I'm guessing that's the issue..... Solutions anyone?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.