Recently active
Hello, i have a problem with connecting to a S5-PLC from Siemens. I want to use WinCC V8.1 to connect with a OPC server in this case KepwareEX. Now i want to know if it is even possible that the OPC server can connect with PROFIBUS FMS wich the S5-PLC uses. Kind regards Wesley
Hi,I'm writing to this support to understand if and how could be possible to reduce the usage of CPU when a big configuration of Kepware is running.The configuration it is composed by almost 80 device configured to query each 10 seconds 2000 Modbus registers for each device, values are archived in a Microsoft SQL Server through Data Logger triggered each 10 seconds.Actually only 2 devices ramps the CPU usage to 10-12% for the server_runtime.exe almost and I don't know what happen when I enable all the 80 devices, how can I reduce to the max the usage of CPU.Which are the information that you need to support me in this issue?Let me know and I can provide the screenshots or logs or config... KEPServer EX V6.11.718.0Modbus TCP/IP Ethernet V6.11.718.0Data Logger PlugIn V6.11.718.0 Best RegardsAlb
I have simple SQL query: SELECT [column 1], [column 2], [column3] ... FROM [table] WHERE [column1]= 31. In my case, conditions are chaning, sometimes I have no WHERE part of querry, sometimes I have 1 column, sometimes 3, depending on operators behaviour.So in query, I added variable filter as parameter, and make a querry like: SELECT [column 1], [column 2], [column3] ... FROM [table] [[filter]] and filter would generated by external service and can be empty if all data needed, but can be also WHERE [column1]=31, or any other combination of WHERE. Unfortunatelly, no matter if I keep filter value empty, or I do put there my WHERE conditions, I receive "Unable to Invoke Service ... on ... : Execute Query failed. Please check Database logs for more details."Have tried to call this service manually, have tried to call by other service, changed name of variable to be sure it's not forbidden word... no changes. Have tried with filter as both, String and Text t
Hello ThingWorx Community, I am currently working with a ThingWorx DataTable that contains approximately 150,000 entries. Since handling large datasets in ThingWorx DataTables is not optimal, I have implemented SQL Server as a more efficient storage solution. Now, I need to migrate this large dataset from ThingWorx DataTable to SQL Server, but I am facing challenges in doing so efficiently. Here are the key concerns: Row-by-Row Insert: When I try to insert data row by row, I run into execution time issues.Bulk Insert Using SQL File: I attempted to create a large SQL insert file, but some data entries are missing or cause issues during execution.Performance & Best Practices: What is the most optimal and scalable way to migrate this large dataset to SQL Server?Has anyone successfully handled a similar data migration in ThingWorx? I would appreciate any insights, best practices, or recommendations for moving large datasets from ThingWorx DataTables to SQL Server efficie
var productionData = [];for (var i = 0; i < 10; i++) {productionData.push({"CurrentIteration": i,"Value": i + 1 //Change it as per your requirement. Like infotable columns names etc. });}throw JSON.stringify(productionData);//For Specific columns and values/items in array use this: "productionData[0].Value"
Hi, I'm using an Advanced Tag of type Derived to perform an AND between two boolean tags. It is expected that if one of them is Unknown because the PLC is disconnected, the result will be 0. If I use only the Derived Tag, the result is shown as Unknown in Quick Client. If I use a Link Tag to copy the result of the Derived to another boolean tag, it shows me the value 0 which is the expected value. Is there any way to get the value 0 without using a link tag?
I'm opening a Project from the backup folder while offline. The Project opens and is exactly what I want to run in KepserverEX6. I go to Runtime and select Connect, and it reverts back to the original Project. What am I missing? I've seen something about Runtime uses the default.opf file to run. I don't see a default file. The original file that it keeps going back to is Simulation Driver Demo.
Hi, We are currently using KEPServerEX 6.15.X with Java 1.8-jre. We need to change the java system to OpenJDK. Which version of OpenJDK is supported for running KEPServerEX 6.15? Kindly provide your feedback.
In Filter widget, how to pass OR condition as default ?
Unable to get KepServerEX connected to my Mitsubishi FX3U processor using a FX-ENET-ADP. Have tried UDP and TCP with no success. Currently plc setup is UDP,1025,192.168.1.250,1025. KepserverEX is set to Mitsubishi Ethernet, and UDP, 5000,0 (have tried other combinations) at this time only attempting to read one tag D250 Have also swapped over to TCP with no success. Any help appreciated Thanks, Bob
I have an OPC-DA server on which i need to expose a number of tags to a remote network.I want to use KepWare to transition from OPC-DA to OPC-UA. How is this done, and using which license / suite?This should also support writing data from OPC-UA back to OPC-DA server. In other words:- source: OPC-DA server- Kepware: connect to source using OPC-DA client- Kepware: provide an OPC-UA Server- target: clients can connect to the OPC-UA server and read/write tags from/to the OPC-DA server through Kepware
In the attached code line no 282, i used state definition to highlight row based on the value present in highlight field of infotable. But it doesnt made any changes in tree grid.
Hello everyone, I'm new to Kepware and I'm trying to connect around 50 channels, each with one device, all using the Allen-Bradley ControlLogix driver. Each device has around 300,000 tags. When I try to start the Runtime, the application seemingly times out and fails to initialize. Is there any way to optimize the application so that it can start under these conditions? ThanksGuilherme
hello community, I have an expression which has value true and when i evaluate to fill the checkbox means to make the checkbox true then it works fine but only for the first time and now when i evaluate this validator again second time.. means it needs to return me true again then it does not return me true. any one has an idea why its like that?so its only working for only once and then not.
Hi, I am also facing the same issue, Tomcat fails to start, and I see the same error message in the system event logs: The Apache Tomcat 9.0 Tomcat9 service terminated with the following service-specific error: The system cannot open the file. Could anyone who has resolved this issue provide some guidance or share their solution? Thank you!
Hi All, I have a lot off error messages in application_log like Unable to dispatch [ uri = /Things/PersistentSession779c7eb0-1f7c-4508-8791-7bd1585922b4/Services/AddDynamicRemoteSubscription/]: Unable to Invoke Service AddDynamicRemoteSubscription on PersistentSession779c7eb0-1f7c-4508-8791-7bd1585922b4 : Not authorized for ServiceInvoke on AddDynamicRemoteSubscription in PersistentSession779c7eb0-1f7c-4508-8791-7bd1585922b4
Hi, I have an application starting mashup named org.proj.entity.name.typeI would like to customize this starting page url or redirecting from customized as mentioned belowhttps://<host>/Thingworx/Runtime/index.html?mashup=org.proj.entity.name.type How to customize this to https://<host>/projectHome thanks,janakiraman P
Hi, We have configured the SAP to CWC using the OData and mapped a couple of APIs. The exact configuration is made for the DEV and QA (Which are just Thingworx Navigate instances)However, the CWC Instance is missing a couple of APIs, which are present on the DEV and QA.How do we debug or reverse engineer why these are missing only on CWC instances? Thanks,
When I setup a OPC DA connection in the Kepware quick client I can connect, and my values is updating.When I use Quick client in Kepware to test my connection my values do not displayCan you guide me in fixing the problem
I want to do something like this - try{ if(someError) throw someErrorException() }catch someErrorException{ result.message = "someError happened" } Expected output in postman if the someError condition is true - Status Code = 500 & response message = someError happened" Instead of this, I am able to get it into status code 500 by forcefully writing erroneous code within the if statement but I am not able to set the error message. Its the standard error message which comes - "XYZ check scriptLog"
Is there a way to create an infotable on a mashup that allows to click on infotables within the infotable like you get on the Thingworx composer? When I send my data to the grid widget, I get an infotable icon that's not clickable. I would assume this is a pretty simple thing since it's used in Composer, but I can't figure it out. Any help would be appreciated.
ThingWorx Version 9.4.0 Every Time I try to save an entity I have to re enter my credentials. The thing also give an error that it is not running no matter what service I try to run. Entity in question is made from the Thingworx Mail extension v. 4.1.1 Thing Template, Configured only no modification from original state. This identical configuration is working on other servers without issue. I have removed the extension and restarted the Apache service, then reinstalled and recreated the thing problem persists. Does anyone know what could cause either of these issues?
I am not able to write value to tare tag in Mettler Toledo Driver Read/Write tag connected via UDP. I can only read values. Any pointers to troubleshoot?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.