Skip to main content
Jul 6, 2016 8:36 PM UTC
Question

Photo-Realistic Rendering

Has anyone else had issues with the revamped Real-Time Rendering not take the assigned appearance? I thought I had it working earlier but now it doesn't seem to work...

Missing Appearance.jpg

I'm able to get it to work inside of Creo with the Shading with Reflections

Shading with Reflections.jpg

Also, when switching the scene, the floor often resets which is annoying as all the scenes should hopefully have the same floor orientation:

scene loses floor.jpg

    3 replies

    Jul 12, 2016 9:29 PM UTC

    Hi Lucas,

    Thanks for your post.  Let me try to answer each detail.

    I created a similar model and applied the PTC standard brass polished appearance.  When selecting the same scene you are using I get this....in Real-Time Rendering.

    7-12-2016 4-53-13 PM.jpg

    Here is the view when in shade with reflections.

    7-12-2016 4-55-23 PM.jpg

    Now I see the brass color and I can also see a slight shadow in both views.  Again the shadow is very slight......

    In both cases, the appearance does not look very polished.  This is something I need to look into....the default properties do not seem correct.

    If I tweak a few properties...I get a better result.  This is the view in Real-Time Rendering.

    7-12-2016 4-58-44 PM.jpg

    Now the properties still reference Class = GENERIC for this appearance.  I would probably change the class to Metal.  Now I get this....

    7-12-2016 5-01-43 PM.jpg

    This seems more realistic. 

    I would also try the advanced appearances......specifically BRASS.

    7-12-2016 5-02-52 PM.jpg

    If you apply the Advanced Polished Brass appearance.....you will get this.

    7-12-2016 5-04-10 PM.jpg

    Here is the same view but in Shade with Reflections.  As you can see the Real-Time Rendering produces a higher quality shot.

    7-12-2016 5-05-16 PM.jpg

    Now I am using the Sneak Peek release and a simple model I created.  I would ask that you email your model so I can take a look at your described issues.  You can email me at -.  As a side note, I will review all the details of the PTC Standard appearances to verify they appear correct in both modes.

    Now you can also play around with the Real-Time Rendering Settings.....to improve your results.

    Here is a simple example.

    7-12-2016 10-16-13 AM.jpg

    As for your your comment on the scene resetting the Floor Plan, let me explain.  Each of the provided scenes use the Floor plane as XY plane (-Y).....which corresponds to the TOP datum plane.  NOTE: Floor orientation is a property of the Scene and each Scene could potentially have different floor orientation.

    Based on your image, I believe your started your initial feature using the Front Datum Plane.  As a result you need to needed to change the floor plane in the scene editor to XY Plane (-Z) so the part would be sitting up-right.  Now when you switch to a new scene, it reverts back to the default floor plane which requires you needing to modify it. This works as implemented and we will not be changing this process at this time.  One thing you can try is redefining your initial feature.....or save a new scene based on the initial ones with the floor plane switched.

    Hope this helps explain a few things.  As I expressed above, we are reviewing each appearance to tweak them as necessary to improve their view for the production release.

    Thanks,

    Mark

    Jul 13, 2016 2:20 PM UTC

    Mark,

    That's for the reply. It looks like it's related to the Class of the material like you said... I'm not sure if all the classes are working as Paint looks just like Generic but I've never played around with classes before. It sounds like you're looking into the default settings to make this work out of the box... thanks!

    generic.jpgmetal.jpg

    paint.jpg

    Shading with Reflections.jpg

    You were correct about using the Front Datum Plane for my first extrude.

    first feature.jpg

    However, people don't always orient their model with Top being up either unintentionally or intentionally. It's not always possible or worth reorienting the CAD model as it could break the model or it might be at a locked/released state in Windchill. I would suggest making users flip the orientation once when rendering their first scene and allow them to easily swap PTC's default scenes by remembering which way they oriented their previous scene.

    Each of the provided scenes use the Floor plane as XY plane (-Y).....which corresponds to the TOP datum plane.

    Saving the selected scene orientation would makes the Out of the Box experience way more intuitive. Here's an example:

    Let's say I finally got this image rendered the way I wanted and was using the Floor Plane=-Z.

    landscape.jpg

    But I'd like to quickly see what this cool village sceme looks like... but now my part is floating in the sky? But I already told Creo how I wanted to oriented relative to the default way ALL of the out of the box scenes are setup?

    village.jpg


    5-6 button clicks later (for every scene switch!) and I can have the scene oriented correctly. It makes swapping scenes way more difficult or annoying than it should be.

    correct.jpg

    I suggest try swapping several different scenes with my model and you'll find it to be quite annoying.


    If users are going to create their own scenes, they should follow the standard PTC logic of -Y is always the default scene orientation or deal with the orientation headache they chose to create. If users created their own scenes, the can easily switch it back to follow the logic.


    Mark, thanks for taking the time to investigate this and listening.


    Luke

    Jul 13, 2016 8:36 PM UTC

    Thanks for the suggestion Luke.  I will discuss this internally and see what is feasible.  In the meantime, you can easily create a mapkey to make the switch......in one click.

    Thanks,

    mark