Skip to main content
Dec 4, 2013 9:30 PM UTC
Delivered

"Set Datums" should be hidden by default when placing a new view on a drawing.

Related products:Creo Parametric

When placing a new view of a model on a drawing, if that model has any set datums, those planes and tags are automatically shown in the view, and the drafter must then select and Erase unwanted ones. On a large model with possibly hundreds of planes distributed among its components and subassemblies, this erasure can be time consuming. The only workaround is to use layers with collection filters for "Shown Datum" (see https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS131258), but logistics or standards may prevent this from being a practical workaround.

Possible solutions:

  • Allow placement of the view with no set datums visible, then show/erase them the same as every other detail item within the Show Model Annotations dialog box (change existing functionality and consolidate behavior in a single dialog box)
  • Allow placement of the view with set datums automatically Erased, and let the drafter Unerase the ones they require in a given view (reverse of current behavior).
  • Create a config.pro or detail setup option that allows drafters to toggle this behavior (enhance current behavior with a configuration option)
    • e.g. auto_erase_set_datums yes/no* - yes: set datums are automatically erased when a view is placed/no*: set datums are automatically shown when a view is placed

56 replies

Sep 14, 2021 5:13 PM UTC

Hi @Bradley_A_Smith 

Set datum tag annotations (SDTA) are different elements than set datums. SDTA creates an actual annotation element of a datum (like DFS - Datum feature symbol does since Creo 4.0), whereas set datums are not

Due to that, the new config option I mentioned above cannot be addressing SDTA as well (being an annotation element) and it will address only set datums

 

 

 

Sep 20, 2021 8:38 AM UTC
Status changed to: Delivered

HI all,

I am updating the status of this enhancement to Delivered. please take the time to check out the new config option that I mentioned in my earlier comments on this thread ("auto_erase_set_datum_planes"). If required, we can update the status if there are any issues beyond what was explained 

Sep 20, 2021 1:41 PM UTC

@Mfridman , thank you for your solution. I've put in a request with management to see if we can upgrade our system to the version that will include your fix. I'm excited to see this pesky problem finally have a resolution.

Apr 22, 2025 4:20 PM UTC

It's been a LOOOOOONNNGGGG time since I posted on this idea. Several year ago @Mfridman offered a partial solution and then implemented it. But for me, we didn't upgrade creo for loooooong time, but time has finally come, late last year, my company moved from Creo 6 to Creo 8 as part of a get back to current supported software, you know, corporate things.

Today I remembered that I hadn't tested the "new" option. So today's the day, my review, drum-roll please!!! 🥁

 

1. I opened an existing drawing with known datum plane issues (aka, every drawing ever created that has set datums), drawing was originally done in 2013, but with some models significantly older. I had already spent HOURS on this drawing getting rid of datums that were already showing on existing views, but when I re-opened the drawing today, there were some rogue datums that had re-appeared, well, "c'est la vie". See image "OPENED FRESH". Reasonably clean drawings.

2. I added the option auto_erase_set_datum_planes YES

3. I "showed" all datums layers, just to make datum display as "bad" as possible, 

4. I added 2 views, 2 different sides of the product. See image added OPTION SET YES. There are absolutely zero datums on the added views...this is a very good result.

5. For "control purposes", I set the option auto_erase_set_datum_planes NO, since honestly, I didn't believe what I was seeing and figured, i'm probably just dreaming AGAIN.

6. I added 2 new views again, same two views as the other added ones, so I could see the difference. All the offensive datums are on the newly added views. See image below OPTION SET NO.

 

This is a very good result. As @Mfridman mentioned, it is a "partial solution". It doesn't solve existing view with datum issues, but it does an excellent job of newly added views...I have to say, I am EXTREMELY HAPPY with this. I've been a little LOUD on my issues with a lack of help on the problem so I wanted to make sure I am also LOUD on the compliments of the "partial solution". On this specific drawing, there would have been several views I could have re-created and moved the annotations from the old view to the new view faster than I could erase the rogue datums. I know I can't take back all my comments, but I would very much like to thank @Mfridman for going to extra mile on this and making a strong move in the correct direction!

 

StephenW_0-1745337581573.png

StephenW_2-1745337997288.png

StephenW_3-1745338265411.png

 

 

Apr 23, 2025 8:03 AM UTC

Thank you @StephenW  for acknowledging that this mini-enhancement carries a positive impact on your day-to-day tasks.

I am very happy to hear that this config is helping you to save a lot of your valuable time 😀

 

Best Regards,

Michael

Apr 24, 2025 9:54 PM UTC

I love it when a plan comes together. @StephenW your post reminded me as well, and I almost broke a leg running to update my config.pro file. This is awesome. The assemblies in our department aren't as big as yours, but the datums are still a big, time-consuming headache. Thank you for being LOUD 😁, and thank you, very much, @Mfridman.