Skip to main content
Dec 4, 2013 9:30 PM UTC
Delivered

"Set Datums" should be hidden by default when placing a new view on a drawing.

Related products:Creo Parametric

When placing a new view of a model on a drawing, if that model has any set datums, those planes and tags are automatically shown in the view, and the drafter must then select and Erase unwanted ones. On a large model with possibly hundreds of planes distributed among its components and subassemblies, this erasure can be time consuming. The only workaround is to use layers with collection filters for "Shown Datum" (see https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS131258), but logistics or standards may prevent this from being a practical workaround.

Possible solutions:

  • Allow placement of the view with no set datums visible, then show/erase them the same as every other detail item within the Show Model Annotations dialog box (change existing functionality and consolidate behavior in a single dialog box)
  • Allow placement of the view with set datums automatically Erased, and let the drafter Unerase the ones they require in a given view (reverse of current behavior).
  • Create a config.pro or detail setup option that allows drafters to toggle this behavior (enhance current behavior with a configuration option)
    • e.g. auto_erase_set_datums yes/no* - yes: set datums are automatically erased when a view is placed/no*: set datums are automatically shown when a view is placed

56 replies

Jan 9, 2017 4:47 PM UTC

We got it easy here compared to what I see here.   We might only have 6 or 7 datums showing.  This is why I've never bothered with it.  However, last week one of our users was complaining & I opened a case on it.  They gave the usual fixes but also directed me to this thread.  Maybe I've wrong but this does not seem like a hard one for PTC to implement.

Mar 24, 2017 7:41 PM UTC

Agreed. Also  blank set-datums in the part and assembly by default

Mar 29, 2017 5:15 PM UTC

Just another bump on this IDEA...no where else do annotations show by default then you have to erase them all. Only set datums...do my dimenisions all show by default...NO...do my axis all show by default...NO...

WHY WHY WHY do the set datums for every piece part in my assembly show by default on every view I add to my assembly drawing?

Mar 29, 2017 5:32 PM UTC

Agreed Stephen.   This does not seem like a difficult thing to fix.  OFF BY DEFAULT! 

Apr 26, 2017 5:16 PM UTC

My obligatory occasional rant on have set datums turned off by default on drawings. I just opened a drawing that hasn't been modified in 4 years.  Lower level parts have continued to evolve during those 4 years...I now have to go turn off those set datums that have magically appeared on the drawing.

Window select on datum planes says I have selected 256 datums on sheet 1...this particular drawing needs to have ZERO datums showing.

OFF BY DEFAULT!!!

Apr 26, 2017 5:20 PM UTC

Dang, & here I get irritated over 6 or 7 of them. 

Jul 14, 2017 12:26 PM UTC

On occassion I like to kick this idea back to the top of the pile! I haven't worked on a large assy dwgs in the past couple of weeks so I don't have any datum nightmare pictures to show.

In any case: Allow placement of the view with no set datums visible, then like every other drawing item, the users shows what they want to show!!!!

Aug 26, 2017 3:57 PM UTC

I thought I might have configuration set up wrong, but this seems like a common and very obvious problem.  Why are we still dealing with this?  I don't use set datums or datum tags in assemblies.  I use them in the making of the part why should they be displayed in upper level assemblies?

Nov 7, 2017 2:27 PM UTC

How many datums do I want to see when I put an assembly view on a drawing...ZERO.

How many datums do I see...I can't count that high without and abacus

My favorite topic, I kick it to the top of the pile every so often. Sorry for the picture reuse...I'm getting lazy.

 

datum-disply.jpg

Nov 28, 2017 10:17 PM UTC

This is so frustrating, looks like we are still in the deleting business!  UGH!