Recently active
It would be a nice feature to be able to open a drawing with right click functionality. It could be a very simple addition, adding the part or assembly number to the open window UI and adding a .drw behind it.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Mechanical engineer in maritime industry2. What version of Creo Parametric are you currently running?8.0.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I would like to be able to use the measure tool on part in one window, whilst simultaneously dimensioning a sketch on another part in another window. At the moment, you can either use the measure tool or create a sketch, but not both a the same time. As a result it is very time consuming to open and close the sketch you are working on when checking 15-20 different dimensions.4. What is the use case for your organization?We receive .step files from 3rd parties and would like to check key dimensions within Creo whilst creating the accompanying part.5. What business value would your suggestion represent for your organization?Save time and redu
Allow redefinition of the type of a pattterned hole without having to delete the pattern first. It is handy to copy a part and modify the copy to make a mating part, but not so much if one has to delete a hole pattern to redefine from a tapped hole to a simple (clearance) hole, then remake the pattern. This is especially frustrating when the pattern has to be irregular to avoid breaking thru other features.
When you start a new part model and create the first sketch for the first feature you will draw a shape the "looks" to be about the size you want but most times it will be way bigger then what you want. For example you want to start with a rectangle that is 10 x 20 (inches or mm) but you end up with a rectangle that is 110 x 225. The only solution to this that I'm aware of is to zoom way in (or maybe way out if you want to start really big) before you start your sketch but this is very subjective and not precise. It would be nice if there was some way to define an initial scale or zoom factor that would allow you to start sketching at roughly the correct size of your average part.
I've been testing out the "Enable_Embedded_component_demo" config and it is extremely useful for any situation that requires downloading large complex models and adding to a custom design. (Robots / actuators / servos and the like). For those who don't use it, this config allows an .ASM file to be saved as a Single file in the working directory. This keep a ton of excess junk out of the directories when assembly models have hundreds of supporting .PRT files associated with them. In many cases I need to be able to hide/show a bunch of these sub parts, but it is not necessary to modify them in any way. To have this a standard permanent feature would be a huge plus to keeping design directories clean and clutter free.
A standard hole that is patterned using a dimension driven pattern cannot be redefined to become a simple hole or vice versaThis behavior affects only Dimension Driven Patterns, a direction driven or axis driven pattern allows for changing the hole type.In this case the hole cannot be redefined
Wanted: Config.pro option that will automatically reset hole notes. I have to change language in all hole notes in all drawings we have. This takes a very long time. I have changed my hole tables, so now I have to reset the notes in all hole features every time I am modifying a part.
The first sketch is never at the right scale of your usual models.Personally, the skeches are systematically 30 times larger than the scale of our models.A circle measures 600 (mm) by default – we need to sketch at 20 (mm).A config.pro option would be very nice to define the default sketch size.default_sketch_size 20 (for example).We shouldn’t need to use the “lock scale” to bring down the dimensions to our usual model scale.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Manufacture of plastics machinery. I am a CNC programmer with Milacron.2. What version of Creo Parametric are you currently running?7.0.5.0 (with the manufacturing package)3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In Creo manufacturing, you can make a milling/drilling sequence. Within that sequence, you create tool motions. One of the features in tool motions is the ability to add CL commands which sometimes becomes multiple lines of code/commands/other info. Creo manufacturing only shows the first line of those CL commands in a numbered list to show the order of your tool motions within that sequence. Creo Manufacturing does have a mouseover feature, but it only shows the first line of that CL Command when you hover over the tool motion step, which causes the need to click o
When Creo creates a 3D PDF it would be nice if there was a way to control where the spin center is in Adobe Acrobat. I realize that the problem is probably related to the way Adobe implaments 3D objects but maybe you could work with them so we have more control over spin center. There is a workaround here but, not a real solution: http://communities.ptc.com/message/249866#249866
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Aerospace, CAD user, CAD users 2. What version of Creo Parametric are you currently running?Creo 73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. This happens most with UDFs but I think it may also happen with copy pastes? When the accuracy is not high enough for a feature to be created, Creo warns the user with a message like the one below. If the user clicks "ok" then Creo returns to the originally inputted value and the user has to update it to the minimum value specified in the error message. This idea is to simply automatically update the value that the user has typed in with the minimum value allowed when the user clicks "ok" saving the user the hassle of doing that. From there if the value is not acceptable the user can change the accuracy and redefine the feature but in order t
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Aerospace; CAD Admin; Engineering & Manufacturing personnel. 2. What version of Creo Parametric are you currently running? Creo Parametric 7.0.7.0.3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Requesting a ModelCHECK check\setting that can detect if an inaccurate Mass has been applied to a model. Example: if a Mass has been changed in the Properties, and then calculated, there's no way to tell that it has been changed, unless each Mass is evaluated manually. In other words, we are asking for a check that would identify a discrepancy between the Assigned mass value (or other properties) and the Computed mass value. 4. What is the use case for your organization? Mass Properties.5. What business value would your suggestion represent for your organization? Proper weights to our products.
If I working with Relations in assembly mode, I would like to see Session ID in Model Tree for objects:You can use this information for your notes in drawings mode.Here is one discusion: Create part name in a note
When an assembly has failed to find a component, it should be possible to select a component with a different name.Usually this error happens because I have renamed a part, but forgotten to have that particular assembly in session (or to save it). At the moment, it is necessary to rename the part back to its exact original name and re-do the whole rename process.Perhaps the software could perform a check on the selected part to confirm that all the feature IDs referenced in the assembly are present, to confirm that it is the same (or a compatible) model.
Add the ability to group offset lines created for the explode state of an assembly.Not part of Creo Parametric functionality per PTC Document - CS157616
There are times when I have a component in an assembly and I realize that component should have been an assembly instead. This most often happens when I need to add pins to the part or something small like that. Starting with Wildfire 5 there was an enhancement made so that if a part is duplicated it could be replaced using the unrelated component and evaluation rules.I would suggest that these rules be updated to look for a component within an assembly. If the component being replaced exists within the assembly that you are replacing the component with, the entity IDs should be able to be auto paired.Said another way:Item to be replaced: Component_A.prtItem replacing it: SubAssembly_B.asmIf assembly contains component A:SubAssembly_B.asm -Component_A.prt -Component_C.prtThen auto pair / update the entity IDs.
In PTC Case article no. CS323813 there is a statement, that for Creo 7.0 C++ 17 is not officially supported. Since C++14 certain new, highly useful functionalities has been added for STL inside C++17 and C++20, e.g.:1. Structure bindings2. Filesystem library3. Optional and Variant class templates.It would be beneficially to be able to utilize those functionalities of STL in OTK AuxApps projects.
Managing crosshatch, repeat region and create new xsection in drawing without Old Style Menu. Please upgrade these user interfaces to something that belongs to this era!
In t he latest Creo 3.0, there are still a lots of commands/menus in Menu Manager, for example, Define Symbol, Repeat Region, Component Display, Table Line Display, Drawing Models and etc.Please make sure No more use Menu Manager in Drawing mode in Creo 4.0
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry - High End Electronics Role - CAD Admin / Manager Stakeholders - Engineering, downstream teams, vendors, etc. 2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Please reference new functionality here:https://support.ptc.com/help/creo/creo_pma/r8.0/usascii/#page/whats_new_pma/core-new_note_tokens_patterned_holes.html# Please reference case: 16331630 When patterned, we would like our hole notes to have a prefix of "4X ". We would like to use:&HOLE_INSTANCE_COUNT&HOLE_INSTANCE_X_SYMBOL&HOLE_INSTANCE_SPACEHowever, some of our notes start with "TAP #&FASTENER_ID"If we combine the two together, we get"&HOLE_INSTANCE_COUNT&HOLE_INSTANCE_X_SYMBOL&HOLE_INSTANCE_SPACETAP #&FASTENER_ID" where
Currently, turning and milling profiles behave differently when lengthened. Milling extends tangentially, when turning the profile is continued. Why is there a difference here? It would be best if the programmer had the choice. Turn Mill I refere to call 13937770
In Creo 6, when creating a new drawing, there is a checkbox which defaults the name to "Use Drawing model file name". We would like to set this by default using a config option. See article CS304760 for more details. Thanks!
To be able to use missing text symbols described in standards (e.g. circled X according to ISO 1101:2017(E) for "Maximum inscribed Feature"), if PTC does not provide them, it should be possible to add them to the text Symbol Palette "ISO". Currently, only the legacy text symbol palette can be Extended with your own text Symbols. These can only be used in dimensions/notes if the Detail Option "Symbol_font" is set to "legacy".
In Creo Parametric 2.0, Note Properties screen was displayed by double click, but it is no longer possible from Creo Parametric 4.0.I want you to be able to do like Creo Parametric 2.0.
The great Advantage of DEX is to save different configurations of models from same version in Windchill. Unfortunately it's not possible to open drawings in a DEX session. It would be a big advantage if drawings would be included in a DEX session. In general you need drawings for documentation of the different versions. In our case we use a drawing for configuration of the model. At least, I don't understand this limitation.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.