Recently active
It would be great if the icon color of all features were consistant, so that all features which results in solid geometry were blue, and all that results in surfaces were purple. Example, the extrude feature is blue when solid geometry is extruded. Likewise purple when a surface is extruded, still using the same icon symbol. This would give much more clarity what is happening in the model, especially when fixing failed features.
Creo 4.0 introduced support for the AMF file format. It left out the most important feature of that format however. PTC says the current functionality is working to spec. This idea is to support the full implementation of curved triangle. This feature more accurately represents curved surfaces: I am aware you can reduce the size of the tessellated surfaces. Curved surfaces would reduce file sizes while at the same time more accurately represent the original geometry.
Please add the ability to show max or min Stress, Strain, Displacement value by selection box similar to other FEA tools to Creo Simulate. Say you need to show the max value for stress in 5 locations on a part in one view. The time it takes to do this with the Dynamic query tool take to long and may not show the highest or lowest value in a given area. Thanks, Don Anderson
In cases a model is saved in a higher revision of Creo it can not be retrieved. Currently this message will not offer the reason why and it can be different. "can not be retrieved" will not really offer the user any idea why and it should be implemented a mechanism to interpret models saved in a higher version to offer text. "Model already stored in a higher version and can not be retrieved anymore."
We would like to use motion envelope function for making assembly fixture or test fixture because the subassemblies are embedded in a fixture. The way is just similar with doing a vertical kinematic motion. By, doing so, it will save a lot of time on remove surfaces on the vertical direction. However, the elements which was generated from Creo motion envelope is too rough even through I have adjusted the quality to 10 (the highest range). Is there any way to adjust configurtion file to make the trianglial element smaller? Or can PTC makes envelope quality adjustment level higher. We really don't mind that computer takes longer time in calculation.
Currently when you have several combined states and appearances (colors) in each one of these, only the appearance activated during the STEP AP242 export is saved.So when you open the STEP AP242 there is the same appearance (the one activated during the export) in each combined state.Creo should export correctly appearances on combined states with a STEP AP242 export.
Currently when you have a model (with flat to screen annotations) exported in STEP AP242, the flat to screen annotation isn't correctly saved.Indeed when you the STEP AP242 the annotation can move with the part so this no longer a "flat to screen" annotation.Creo should export flat to screen annotation correctly in STEP AP242 (part of the MBD Definition)
When you create a combined states you can rename it and then put it in a specific order (example : Section - front view - Left view) But after a STEP AP242 export, combined states are saved in the alphabetical order (example : front - left - section) so the STEP export lose the order we want to display combined states. Creo should export combined states order correctly with a STEP AP242 export (part of the MBD definition)
When a 3D model with hatch on a section (and the section is part of a combined state) is exported in STEP AP242, then when you open the combined states of the STEP AP242 hatch won't appear on the section. You have to activate hatch manually by : right-click on the section -> edit the definition -> display hatch pattern Creo should display automatically hatch on a section after a STEP AP242 export (part of the MBD definition)
Currently when you have several combined states and different simplified representation in each one of these, only the simplified representation activated during the STEP AP242 export is saved.So when you open the STEP AP242 there is the same simplified representation (the one activated during the export) in each combined state.Creo should export correctly simplified representation (for a .Prt AND an .Asm) on combined states with a STEP AP242 export.
When you create a combined states you can rename it and then put it in a specific order (example : Section - front view - Left view) But after a PVZ export, combined states are saved in the alphabetical order (example : front - left - section) so the PVZ format lose the order we want to display combined states. Creo should export combined states order correctly with a PVZ export (for the MBD definition)
Currently when you have several combined states and different simplified representation in each one of these, only the simplified representation activated during the PVZ export is saved.So when you open the PVZ file on Creo View there is the same simplified representation (the one activated during the export) in each combined state.Creo should export correctly simplified representation (for a .Prt AND an .Asm) on combined states with a PVZ export. (for the MBD definition)
When you export a 3D model in a STEP format from Creo, it's possible to parameter data exported by using the step_profile_export file (see photo attached)It works correctly on Creo Parametric but when you use a CAD Worker, the step_profile_export file is not supported ! So it's impossible to choose which type of data(annotations, datums, ...) should be exported with the use of a CAD Worker.This is a problem hinder for a company (using CAD Worker) which want to use the Model Based Definition and thus archive STEP AP242 model with 3D annotations.
Maintain the currently active drawing background settings when entering print preview mode. Don't switch to white!From CS184887
Allow one Creo process to work with multiple and independent sessions. It could exist a session manager too. With this resource will be possible to open and work with different versions of the same file without interference. Today is only possible do this oppening two licenses. In this way, it should also be possible to connect with different workspaces at the same time without interation between the sessions.
Like common spreadsheet programs, it would be nice to have the prompts displayed as seen below for the syntax that Creo is expecting when writing a relation.
After case 12516007 ptc told me that it is not supported.Creo supports shaded view, it supports export of shaded view in dxf, hpgl, pdf.But it doesn't support import of shaded view from dxf.In my opinion this is a big lack and ptc has to fill the gap soon.
Please add an "open" command in drawing menu to directly open the model without passing by model tree.
Double-click on middle button to Refit objects or drawingDouble-middle-click could be useful to any very often used command.I love this useful SolidWorks command ...Realy missing in Creo
Possibility to place a datum point on a surface like a radial hole: with an angle and a Z dimension.If possible, not only on cylindrical surface.
1- Automatically go to the next reference when you select one.2- Like in UDFs references selection, in COPY/PASTE window, add the keyboard arrow action to go to the next reference.3- Like in the COPY/SPECIAL PASTE, in UDFs window, add automatic selection for the "Original references". (IDEA 3517)
Inconsistency happens when parts get exchanged in an assemblySteps to break the dependency:Use any original part (original.prt)This is assembled into assembly.asmThen create a copy of a surface of the assembled part in assembly mode.Create a copy of original part (original.prt) the new name is copy1.prtNow we redefine a feature of copy1.prt e.g. mirror slotNow we retrieve the assembly again and try to replace the part (original.prt) with the new part (copy1.prt). The feature used is “unreleated component” Unfortunately the references got lost.The internal ID of the surface has changed without any need, because geometry in this area wasn’t changed. In future releases there must be an opportunity to exchange unrelated parts without loss of references.Possible solutions:the internal IDs in the copied part will remain unchangedin Reference Pairing Table the user can automatically map the references of historically identical components (e.g. create a copy of original part)
Drawing, cross-section view, create arrow, we would like to set the length by "Value" not dragging.AutoCAD is able to set the length of arrow in section by "Value" but Creo Parametrirc is not.Creo Parametric must set it by dragging.We can not set the same lenth of arrow size in accurate if both drawing created by AutoCAD and Creo Parametric.We are requesting on set it value at Drawing Option.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.