Recently active
Stop forcing customers to purchase with a subscription license option only. No one believes your propaganda of the so called benefits to customers. Your competitors such as SolidWorks and SolidEdge offer subscriptions as AN OPTION, but, they still sell perpetual license as well. In fact, there is no price increase for wanting perpetual, there is no threats of withholding functionality because an existing customers does not want to switch..... and the approach they take with subscriptions can be month to month (SolidEdge) or at three months at a time (SolidWorks), and neither forces a written letter 60 days in advance if a customer does not to automatically renew. WOW, imagine the PTC, your competitors actually know what there customers want, and they actually listen!!! Do you (PTC) remember the days when you listened to your customers? Do you (PTC) remember the days when PTC led the CAD market, and all your competitors would follow you? Stop trying to follow what others are doin
Currently repeat regions with the attribute "Duplicates" or "No Dup/Level" sort by Feature # by default, which puts components into their assembly order. "No Duplicates" sorts differently for some reason, and I think it should also sort by Feature #. For recursive components that show up in more than one location (ie sub components used in more than one sub-assembly), they could just be shown once in the first location they're used.Please reference the following support articles describing the current functionality: Article - CS195493 - BOM table with attribute No Duplicates does not sort the table based on Feature # in Creo Parametric Article - CS51354 - How to generate BOM listing of components in order of assembly, and also keep the No Duplicates attributes in Pro/ENGINEER and Creo Elemenst/Pro
Please add a config.pro option to, by default, set all data sharing feature dependency option to Manual update.
In product design, especially consumer goods, there is an increasing demand for various complex 3D surface textures. We would like to have the ability to create organic patterns or voronoi diagrams on as well shells as surfaces or parts of surfaces. This is possible with Grasshopper, Voronoi Generator and some other tools but not yet in Creo. Just google "organic patterns 3D" to see nice examples.
PRODUCT IDEA - Allow scaling of hidden lines in ".drw" It would be nice as it has been an option in many of the 2d drafting packages. Historically we have the option in a 2d drafting package to set the scale of hidden lines so they are represented in a clearer way on the drawings we output. As you can see in the attached image, the hidden holes in the drawing show up very poorly. The drawing is D sized and scaled 3:8 I have many plates which this is an ongoing problem with. it would be nice at a drawing level to be able to adjust the hidden line scale so they show up in a clearer manner. if you read this and agree with it please upvote. -Don
Please vote on the existing ideas in the comments As of Creo Parametric 3, M120, tables do not retain text formatting. Which means that, even if the user formats the entire table, each time text is entered it will have to be formatted separately, significantly decreasing productivity. PTC, please allow tables to retain formatting for entered text. Reference: Article - CS94103Creo Parametric does not remember the Text Style set for a note or table cell in drawing mode. The Style Name in Text Style tab of Note Properties dialog is always shown as Default https://www.ptc.com/en/support/article?n=CS94103 Table text settings https://community.ptc.com/t5/System-Administration/Table-text-settings/m-p/481946 Is there no way to predefine the text format in tables? https://community.ptc.com/t5/Creo-Modeling-Questions/Tables/m-p/99805
The automatic material removal for plan milling features with the parameter "trim_to_workpice" set to yes is acutally not good. Please improve this functionality I refeere to the calls 13876839 and 13876842
Make available in assembly mode the feature Merge - Inheritance and an option to set the level the feature must be created (assembly or part). There is already this kind of option when creating an extrude in assembly mode. This functionality to select the level the feature must be created can also be added in the assembly feature Boolean Operations. Maybe this new option can be available only with the option cut. Today, Merge - Inheritance and Boolean operation can only be created at level part. Target is to cut several parts in one assembly removing volume of one additional part and to do it only at assembly level.
Currently, Creo Simulate can run Large Deformation Snap Through Analyses (Non-linear Stability) e.g. a cup spring under load, but Contact is not supported for a Snap Through analysis. There are cases where Contact + Snap Through are beneficial (e.g. if you want to simulate a plastic buckle/snap fit where 2 plastic parts slide past each other and snap into place). Can PTC please enable Snap Through + Contact Analyses to be run in Creo Simulate?
ProToolkit today does not expose the fill information (hatching lines) to fill regions in a user defined symbols. The filled regions can be identified as entities having a polyline boundary. The Toolkit today exposes the boundary of a region, but the hatching lines within this region are not available. We are requesting this fill region to be made available.
Import CATIA Models with file names more than 80 characters long.
Reference Article - CS159462. A config option or a seperate switch for that would be fine. We dont have any use case for Standard hole notes. The way to hide via Layer is not user friendly in Assemblies
Ability to solidify merged surfaces (add material) in sheetmetal to properly represent twisted, distorted, or deformed features that are created when a feature is pulled around a sheetmetal bend, but does not have tooling supporting it and generates geometry that can not be recreated using the form feature.
When replacing a component, the Family Tree dialog box only shows the filename column. Additional columns (eg: Common Name) have to be configured to be shown everytime when accessing the dialog box. I will be helpful if the Familyt Tree dialog setup (columns) can be saved.
Need ability to break axis and can add broken clipping line but do not affect the axis dimension value in drawing in Creo Parametric.
Currently, the only place you can register and launch aux apps is from the tools tab in parametric. When in the Simulate environment, the button disappears from the ribbon and there is no option to add the command so the user has to exit simulate, launch the app, then re-enter simulate. It would be much more convenient to have the button in Simulate as well (or at least make the command 'add-able' when customizing the ribbon in Simulate).
The functionality "cutting tool Adapter" is only available for milling sequences. Please add this for turning too. I referee to article CS285074
For example for trajectory NC Sequence while defining a connect tool motion the NC parameter tip_control_point is unavailable. In turning it´s also often not available. Please add this Option to all tool motions I referee to article CS285095
Add the ability to format (colors, dimensions, font ecc...) and customize (add symbols and descriptions...) notes related to Creo Product Insight Sensors. They are not reflecting the format described in the 3D dtl file, generating a non uniform MBD representation. Please enable the "sensor parameter note format" variable in the config.pro.
Hello Team, Just an idea for Creo parametric to work on internet. No need to install Creo licence in any machine. PTC will have all Creo license files in cloud and user has to get it thru PTC login. This is very high level option to go. Thanks, Jitu Thakor Cell: +91 968 763 1627
We have drawing formats where there are model parameters linked to the title block cells. Many users end up accidentally removing the parameter call outs in their drawing (like &PROI_REVISION, &DESCRIPTION, etc) as they attempt to edit it. The models end up getting released with these broken links because the approvers/managers are not concerned about this. However, the admins are. We end up with parameters or attributes in Windchill either missing or incorrect from this. Can we have a way to lock the cells where they can't remove the parameter, BUT can still edit the value of the parameter? Thanks!
Hello, It would be very nice to have some thumbnails from model instead of icons for saved and default orientations in CREO parametric. This, to be able to select directly correct orientation instead of trying each orientation to find the one we want. Regards,
When exporting the parameters into an XML file please export the column "Designated" too. Other Columns like locked and value etc. are already exported.
Creo 3.0. Please allow groups, patterns and stand alone components all to be resumed together in an assembly. I currently can only resume patterns with other patterns. I cannot select a stand alone component and a pattern at the same time and resume together.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.