Recently active
As PTC keeps making improvements to Modelcheck, I see more companies wanting to ModelCheck and Gatekeeper. However, as of Windchill 11 M030 and Creo 4 M040, ModelCheck and Windchill Gatekeeper are out of sync. Gatekeeper requires that objects (PRT, ASM, and DRW) be checked within a specified time window - example: must be checked by ModelCheck within the last 5 days. In Creo ModelCheck, there's no way to match this moving time requirement in the condition.mcc file as to recheck a model to prevent unneeded local modifications to files. There almost needs to be a way to specify IF (MC_VERIFIED EQ YES) AND (MODEL_CHECK LTE 5DAYS) NOCHECK. Adding the ability to specify a time window (in days or hours) would allow this to work much better with Gatekeeper. Also, adding the ability to exempt for NEW, LOCALLY_MODIFIED, or CHECKED_OUT may allow admins even more flexibility in exempting objects as well. Another small change to Gatekeeper that could help is the abil
Unable to save a copy ECAD assembly to ECAD IDF (*.emn) file, but regular assembly file can be exported to ECAD IDF (*.emn) in Creo Parametric.
Allow the creation of balloons for repeat regions where the rpt.qty is from an instance of the assembly. (Repeat Region --> Column Model/Rep).
It would be great if we can change the type of the plane also to midplane after selecting 2 references. Now I have to select the first reference, change the type to midplane and select the second one. For all other types I can change the type also after selection.
It is good to have an Pro toolkit API which can check/uncheck supplemental geometry option in Combined Views.
In Creo 3 M170 the config.pro Option "mfg_misc_user_options" was implemented. With this Option it´s possible, to Change some Standard values with help of the file "ncmenueoptions.xml" placed in Common Files\text\templates\mach_sim\. Please add here also lines for the "save a CL file" menu. I referee to call 14187158
Add transformation matrix to CREO mechanism module so you can output the translations and rotaties of a mechanism body throughout it's motion into a text file.
Usually when placing a cross section, it is an engineer's intent to place the cross section arrows on the view that the cross section is enabled on. Sometimes they would like to move it to another view, but oftentimes it just stays on the view the cross section was enabled on. This would save digging around the View Properties menu for the arrows table entry, or needing to click the Arrows UI button multiple times.
When a part is selected in an assembly the model tree will expand to show you where the part is located. When the part is deselected, the model tree stays open. it would be nice to have the option for the model tree to collapse or give the user an option other than collapse all.
Enable Weld Features Creation directly using Element trees in Creo Parametric In Vestas product , most of the places we have to create weld. It is taking more manual time & reducing quality of product if wrong weld is done. To avoid this we are planning to automate weld creation. It will improve the business. Could you please help as to solve this .
missing this to show fastners.
Placement of GD&T frames should be allowed to be placed below a note (especially a hole note). Just adding &gp{#gtol#} is not sufficient, because there is no semantic query, and you cannot then erase the standard GTOL display without also erasing the hole note from display
I have a suggestion regarding the graphics performance of large assemblies. I noticed that the graphics performance of Creo View is way better than the performance of Creo Parametric. This goes for both mouse spinning and spaceball spinning. While a large assy is loading in Creo, the user sees a 3D preview that is zoomable and spinnable; I suppose that this is a Creo-View-kind-of-lightweight-Viewable embedded in the prt's and asm's. So, what if Creo would momentary switch to a Creo View-like graphics mode whenever the user touches the spaceball, and switch back to "real" mode if the user lets go of the spaceball? I would expect that this would be fairly easy to implement, because the lightweight data is probably there in memory, and the current camera position is also known. It would dramatically enhance navigation within large assies. Second suggestion, also very convenient in large assies: I've seen that other 3D CAD programs often have a Dice-shaped navigation tool in the corne
Creo has drastically more clicks throughout the interface, then Solidworks. The interface should be more intuitive, with alot less clicks.
See article https://www.ptc.com/en/support/article?n=CS287389 PTC brought back the note properties within a drawing because many users felt it was easier to edit a note than within the note itself. However, when using the new ASME and ISO symbols, the TEXT SYMBOL box within the note properties is grayed out. It would be great if it wasn't so users can utilize the note properties to its fullest.
It should not be regenerated automatically after every change, but at a time that the user himself determines.The regeneration certainly takes fifty percent of the construction time.This time could be dramatically reduced if one could make several changes in succession without regeneration. An example: One part has 300 draft angles.You change the first, after all the following 299 are regenerated.You change the fifth, after Burzigung all subsequent 295 are regenerated.and so on.This costs an incredible amount of time - completely unnecessary.
While it is possible to create a BOM (repeat region) with quantities listed for various forms of an assembly (lets say that the housing color changes, requiring different housing part numbers for each assembly variant), it is IMPOSSIBLE to create BOM balloons that are parametrically driven by the BOM table. This is EXTREMELY unfortunate and seems to cause a lot of headache. While there is a "work around" using non-BOM repeat regions to list part numbers based on the family table, this is cumbersome and not inline with industry standards. The alternative is to have a separate BOM for each variant, but syncing the item numbers becomes a manual process (very error prone) or to create balloon notes manually (again, very error prone).
It should be possible to delete all selected elements and everything else with the remove key.In addition, multiple selection using the shift key should be possible in all windows.An example:In the Area sets selection window, the elements can only be selected individually by mouse click and can only be removed individually with the right mouse button.This is extremely awkward.
It should be possible to turn off all hint windowsIt is very annoying if you always have to confirm the error messages when saving.It is quite sufficient if the errors in the model tree are highlighted in red.
Could be more simple. Why not do it on the drawing? instead of the need to open the model. Take a look at Solidworks way of making it. More simple, takes less time. click section view click were you want the cut. click were you want the view. done!
it should be absolutely possible to change the font height when modeling and constructing.She is set too small.
In certain Creo operation, you need to define references in a set, e.g. when creating round, you define one or more rounds. Creo automatically creates a set of references with the same properties. Now, if you want to define different properties on one of already selected references, you need to remove it from the set and add it to a new set. In case, you need to remove more than one reference from a set this takes a lot of effort, since you need to select each reference, right-click it and Remove it from a set. Idea for improvement is to add additional command to pop-up menu when you select a reference in existing set, which would allow moving of the selected reference to a new set. E.g. you would select a reference, right-click it, the pop-up menu would appear and by selecting Move to a new set, the reference would be removed from existing set and moved to a new set. In a new set, you could then change the properties of the newly created set. This would save ti
When a feature is created which enables set of references, those can only be selected and then removed one at a time. E.g. when you create a round on multiple edges, each edge is listed as a reference in the same set. If you would like to remove edges from the set, you need to right-click each one of the edges to be removed and select Remove from the pop-up menu. When you want to remove many references this takes a lot of time and effort by right-clicking each individual reference. Idea for enhancement is to enable selecting the references in a set by using CTRL or SHIFT and then carrying out operations on selected references. This way you could select more than one reference by holding CTRL, then right-click them and select Remove from the pop-up menu.
3D model (.prt) : tolerance on the EDGE -> 2D drawing (.dwg) : POSSIBLE to move the tolerance on the drawing (see video) 3D model (.prt) : tolerance on the SURFACE -> 2D drawing (.dwg) : IMPOSSIBLE to move the tolerance on the drawing (see video) It should be possible to move a tolerance on the drawing when it's positionned on a surface in the 3D model !
Change functionality to expand folder tree by default. Reference CS189390.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.