Recently active
Up to Wildfire 4 it was possible to select annotations (dimensions, axis, ...) during the show / erase dialog by using a selection box. User was able to select an area with a rectangle. Since Creo the new dialog does not allow or support this procedure. User must select or deselect each item in an area by mouse click. Would be nice to have the old feature again.
Hello, we have an option to release/catch floating modules online but would be nice to do it even with standard (startup) license. We have many batch files with a specific configuration to run but it is pain when somebody realize more advanced license is necessary (like you run standard Creo but suddenly need advanced assembly so you must save whole work, shutdown Creo and run advanced assembly license). Think gonna be great to run Creo always just as a blank license but have all other modules as floating and just choose what you want and release/catch it anytime...
Should be able to output vector file format from CreoVeiw. It used to be available. Here is an article: https://www.ptc.com/en/support/article?n=CS265497
When defining partial drawing view, besides the view boundary reference point you also need to sketch spline-shaped view boundary. Product idea is to have, additionally to the spline boundary, also predefined boundary shapes available, e.g. circle, square, rectangle (with possibility to create your own or even to load them from the sketch library already available in Creo) not to sketch spline everytime, where you might need only rectangle. Shapes should be modifyable in a way to be able to either drag corners to deform rectangular shape and to drag sides or arcs and not to loose rectangularity (similar to *CAD Box object). Spline shaped drawing view boundary (currently the only option) Rectangle shaped drawing view boundary Circle shaped drawing view boundary Ellipse shaped drawing view boundary
Currently in drawings only basic draft entities are available to create draft items, i.e. line, circle, ellipse, arc, etc. Product idea is to have sketcher pallete, the same as in Sketcher module, also available for sketching draft items in drawings. This way it would be far easier to create polygons such as rectangles. Draft entities should be modifyable in a way to be able to either drag corners to deform rectangular shape and to drag sides or arcs and not to loose rectangularity (similar to *CAD Box object).
Após inserir a primeira vista no desenho e configurar a vista com linhas invisiveis, linhas de tangência e outras as demais vista gerada do pai deverão vir com a mesma caracteristica da vista principal já configurada.
Currently there isn't a way to easily replace datum references without the datum moving. It would be very helpful to allow users to do one or more of the following: add a new redundant reference(s) with automatically calculated offsets, etc. and then delete the old reference(s) freeze the position of a datum, delete old references and then add new references with automatically calculated offsets, then remove freeze allow users to replace references without the datum moving automate the elimination of external references for datum features This new functionality needs to support internal and external datum references. NOTE: This new functionality is similar to what can be done with component placement references.
Allow users to copy/paste ribbon tabs, groups, items from one ribbon mode, location, etc. to another.
We can not get or set the size of a custom symbol arrowhead using Pro Toolkit API, so symbols created via API may have incorrect leader arrowhead (too big or too small)
Drawings with multiple sheets need a Table of Contents (TOC) - just like any other multi-page document. Report repeat region parameters would need to be established for just this purpose. A Table of Contents should be just as easy to implement as a Bill of Materials. A parametric Table of Contents would update any time a sheet is added, or is re-named or moved in sequence.
Creo 4 introduced: 1. 'Shown Items' layer enabling to show an item quickly, not having to search for the layer(s) it is in.2. AND it introduced 'hidden by layer is hidden in model tree as well' At least.. I thought this was the intent of the enhancement... appearantly not... Problem; Some items hidden by some types of layers are hidden in Model Tree, most items hidden by layer are NOT hidden in Model Tree; NO LOGIC there Problem2; As a result you need to go to layer tree and search for a layer with the item after all to RMB show the item (and make it 'shown' independent of layer status) Problem3; Items can be both is the 'shown items' layer and the 'hidden items' layer; BAD OVERVIEW
I opened a case with PTC, however this was closed saying it works according to product specification. Let me explain, what I believe is a bug or at least overlooked by PTC. When using config.pro option; Regen_failure_handling no_resolve_mode. Creo now has the nice option to see in the model tree the errors, these are also listed in the notification center, but this only works in some cases. If you create a simple model of a rectangle with two dimensions in the sketch, let's say Length and Width, then extrude for the Thickness. Assign each dimension to a parameter in a relation; Length, Width, Thickness If you pass a zero value to the Sketch dimensions, close the relation window and regenerate, the model will fail and show the errors in the model tree/notification center. If you pass a zero value to the Extrude (Thickness), close the relation window and regenerate, the model will NOT Fail. You will see in the message log that some relations are no longer satisfied, if you open the rela
We would like to be able to export a step file with annotations but without quilts. Currently when selecting annotations, quilts are automatically selected and greyed out so they cannot be unselected. A PTC support representative already explained there's no way around it using the standard options. Please make it possible to export a step file with annotations but without quilts. Currently when we want to send a step file to our vendors (mold maker for example) it includes confusing quilts which are a potential source for errors.
Hatch Pattern defined and visible under a specific Combined State is visible in a different Combined State after activating and regenerating the model in Creo Parametric 4.0 Case #1 https://www.ptc.com/en/support/article?n=CS294535&source=Case%20Viewer Case #2 https://www.ptc.com/en/support/article?n=CS270753&source=Case%20Viewer SPR 7819192 https://support.ptc.com/appserver/cs/view/spr.jsp?n=7819192
Unfortunately the words for "failure" and "success" in German Creo are of the same length and at the first sigth there is no difference in the result of the verification status in family tables (see attached picture "original"). The suggestion is to color-mark the words for "failure" and "success" in the verification status or to use symbols like a cross and a check-mark.
By entering an upper tolerance value of e.g. 0.05 it is displayed with "+0.05" on the drawing. Entering the lower value with "0.01" flips automatically to "-0.01" which is not the design intent. By entering "+0.01" to the Checkbox the value changes to "0.01" in the entry field when pushing the enter-button. That is confusing and causes mistakes in drawings and manufacuring. Suggestion1: Please always show the "+" or "-" in front of the value. Suggestion2: Please create an option to show the "+" as default in front of the minor value. (for those users to whom this is much more common)
I don't need this additional sub-assembly. So I always open first sub-level as top-assembly in order to get back to the initial number of levels in the model tree. It would be more convenient for Creo to open the STEP format file without the added level.
When having an embedded Mathcad document in the model there is a Icon in the graphic window that can be used for opening the document. Unfortunatley it will also create a new mathcad document that must be manually closed. The Icon only appear in the graphic window when there is an embedded document so the Icon should only open the existing document. (it is not possible to save more that one document in the model)
Hello, I'm using your company Creo Parametric and Creo Simulate at Yaskawa Electric in Korea. We have purchased and are using multiple copies of Creo Parametric Node-Lock licenses and one copy of the Creo Simulate Floating license. However, a very inconvenient thing is that you have to run it separately on your desktop to run Creo Simulate in Creo Parametric Node-Lock. Clicking on the Simulate icon within Creo Parametric will cause an error. Due to this issue, the time loss is very high in large 3D operations. Please solve it as soon as possible.
In Creo 4 there is a Mathcad icon in the Graphics window when a Prime document is embedded. It would be clearer if there was a Icon in the model tree that represent the embedded document and use that to open the embedded document.
Currently there is no way to interrupt a Creepage and Clearance Analysis without completely killing the xtop.exe process from task manager. If you make your mesh size too small, you may be running for hours with no access to Creo.
Assembly "repeat" function requires the part to be selected - most other functions are able to activate by selecting a single geometry from the part, Creo then assumes they mean the whole part in assembly mode. On a default geometry select "repeat" stays greyed out until the user selects the part (from model tree or through the mini toolbar) - this is awkward and not in keeping with other similar Creo functions.
At Progressive Die ExtensionI would like you to add a function for drawing die.· Blank creation function· Molding analysis function
Please allow drafts on warped surfaces. Currently we need to warp a logo since adjusting it in the sketch will deform the splines. However, we also need to draft the logo, which won't work on warp surfaces. Please allow for this. Thanks!
In my current version ( Creo 4 M060) it's not possible to relate a drawing annotation to the symbol of Datum target. It's possible to relate it to dimensions, other GD&T but not to single Datum target. It could be VERY useful. thanks
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.