Recently active
I imported windows fonts (.ttf) so that I could use "Roman s" font in drawings. When creating a numbered "notes" list, the second line of text never lines up with the first line of a numbered note. I was told that this is due to the fact that there is no "ruler" that allows you to establish tabs/alignment for numbered lists. This does not make any sense to me. Your list ends up looking like this: 1. first line of text second line of text is always misaligned 2. first line second line *Can this be fixed?
You have a family tabled part that has a patterned feature. The dimensions of the spacing and number of instances of the patterned feature are included in the family table. Then you make a 2d repeat region on a drawing and show the spacing dimension of the pattern. When you change the number of instances in the pattern to 1, the spacing dimension no longer applies because there is no spacing anymore with only 1 feature. So the spacing dimension should change to a dash symbol to indicate that it is no longer present. But it does not do this. Instead, the 2d repeat region will show any dimension that happens to be in the family table for the spacing. Here is an example of what it looks like. In the row TEST_2, the dimension "B" should show a dash (-) instead of 3.00 to indicate that "B" does not exist in this part.
For example create a rule that lists all the cosmetics contained in layers with "07" in their names.
When things change in a top down environment or within a model itself, child models/features are bound to lose their references to their parents. These features fail and the missing references need to be removed individually, which is painfully slow. Why not introduce an option that when features are missing, and cannot be rerouted, you can remove all missing references with a single button click within the feature dialog box. This would speed up the design process inordinately. This would work for for copy geometry, sketcher, rounds, chamfers, shell creation in simulate, copy surface (individual) etc. Any feature that results in multiple, individual reference selections to complete the feature.
Nesting configurable products is possible on the Creo side (Assemble command does not prevent selecting an existing configurable product) and it is supported on the Windchill side. The problem is that if configurable module are collapsible in both Opiton & Variat and Option Modeler, Configurable product in Option Modeler remains as Assembly inspite of in Option & Variant is Collapsible. An idea of Creo Configurable Product collapsible in Option Modeler linked with Option & Variant sould be a good idea to obtain coherent module variant in WTparts structure and the same EPMdocument obtained applying "variant builder" option.
This is required because the config option export_profiles_step does not apply in the current session; the only way to change it is by using the export profile dialog.
I propose to improve the CREO functionality for detecting gouges in the CREO (this is not a question of ModuleWorks), irrespective of the gouge check step in the toolpath transition sections from one NC sequence to another NC sequence. In Creo Parametric 5.0.4.0 not always gouges are found in areas of transition from one NC sequence to another NC sequence. To detect them, it is now necessary to select a specific step value (not tolerance) when checking the CL file for gouges Manufacturing resultGouges check. Step = 0.5 If step of gouge check = 1 and another, gouges don't found!
Allow the bolt circle in a drawing to be selectable for dimensioning. It is not always advantageous or robust to create a hole using a radial and angular offset which is currently required to make a bolt circle and dimension it in the drawing. I frequently use a sketch to locate a single hole or all the holes in a circular pattern and would like to be able to dimension the resulting bolt circle without being forced to design it a specific way. This improvement will make drawings/designs more robust and save time during drafting.
During the gouges check in CREO manufacturing, it is possible to establish a tolerance on the basis of which a decision is made whether there is an incision or not. But no parameter responsible for the accuracy of the collision detection in CREO manufacturing. The lesser the speed of tool path display, the higher is the accuracy of collision checking.Idea: Create parameter responsible for the accuracy of the collision detection in CREO manufacturing.
When using stacked limits in a dimension, ( upper limit above the lower). Make it such that the decimal markers are aligned vertically. For example consider a dimension of 10,0 / 9,8. When this is shown as stacked limits in a Creo drawing, it is left justified which is wrong with respect to ISO 129.
Current functionality in Creo 4 M060:Activating a model within the context of an assembly does not change the selection criteria for geometry (the default filter) to be confined to the context of the active model. This negates the usefulness of activating a model, especially if the model is buried within the assembly, which makes it hard to select those surfaces.Suggestion:Make the context of the selection default to only allow selecting active model geometry, and let ALT+select give the non-context version where you can pick any geometry, similar to how ALT is used in many other situations.AND/OR, provide a configuration to let us specify which context is default for activated models.
The field generally has no useful information for the component being selected but takes up space in the best place for other fields that are very useful.
While exporting Creo files to .U3D format, hidden items are not captured. They are missing in newly saved(created) .U3D file. Currently, there are no options available in Creo while exporting to .U3D format. Enhancement idea : Provide a pop-up Option window such that the user can decide whether to select "export all items in window" or "just visible/selected items" during .U3D conversion. Business impact : Apparently, a lot of OEM companies are looking at Model Based Definition or 'drawing less future' where 3D models are directly exported to various formats instead of drafting them. Even though .U3D is an older format, many companies are not able to use file format effectively due to limited feature support from CAD development teams. It has many advantages over .stp format, primarily being lighter in size than .stp. format. It is a chance for PTC to dominate market in this field may be by a little promotion to use .U3D file formats.
Currently you can only rename in session a part model to use an existing name if you perform the rename operation within the part model file. You can also rename in session a singe assy file by inputting the already existing name in the Rename in Session menu prior to the Assy Rename Menu being displayed. If you try to rename a part or assy model while in an assy the assy rename dialog menu is displayed, a "the name is already used for another object" error message occurs, and the OK button is greyed out, preventing this operation. Allow the ability to rename in session any model to use an existing name (overwrite) when using the assy rename dialog menu.
I would like to have an option to change a string parameter to a real number, the same way as you change a real number to a string using Itos(). There is not really a simple way to achieve this now.
When you export Creo files you can set a profile per export type ( step, iges etc) and configure it to comply with company standard. However, the user can change those setting and cause downstream issues ( Security, IP etc ). Having the possibility to enforce the standard, using config.pro or such, and block the user from changing the defaults is needed.
In Sheet Metal - As of today, Creo 6.0, only Coordinate System & Hole axis has the option to "follow surface" it was built on. Need to have the same functionality for Datum Axis/point
While converting from .prt file to .stl file in Creo Parametric 3.0, I want to keep the chord height, angle control and step size as 0.5, by default. Currently the default setting is something different in my system. It will be beneficial, if we can change this default setting in Creo to have more control on the file conversion process.
Highlight top cell of row and side cell of column for clarity of row and column being edited (similar to Excel). Helps user better visualize what cell is being edited.
If there are multiple GD&T callouts applied to a single location like the image below you cannot delete just one of these while in the drawing. If you attempt to do this it will delete both of them. To delete just 1 of them you must do it in the model however, once you do this in the model there is no undo option. Please allow deletion of just 1 of the GD&T callouts in the drawing and also allow an undo of a deletion in the model.
Hello, I found a limitation in the Creo Parametric software already present from the first version and was never implemented. In the wood tools word where everything revolves around an axis, I find a Creo Parametric limitation: I can't create a revolution (surface, solid, removal, etc.) if the axis is not on the same plane as the sketch. PCT esupport replied that it is not a problem but it is an implementation. So if someone else had this need I ask you to report it and expand this discussion so that it can be taken into consideration by the PTC staff. Thanks Christopher S.TWT srl
"Default All" is an unavoidable system combined state: when you open an assembly, it is the active combined state by default. But it is not perfect for us. The problem is that this combined state use "Default Rep" as simplified representation instead of Master one, and same for Style: "Default Style" instead of Master Style. It is a problem, we want the defaut state to set Masters Representation and Style. Effectively, if the assembly is saved in "Default All" state, then it is not save in Masters representations and the Creoview visualization is not correct: in Creoview you must be in Master Rep. Another reason is that "Default Rep" & "Default Style" can be redefined: so they are not really default assembly representations: the real defaults are Master Rep & Master Style. We want the same behavior as in part: "> Default All" doesn't change Simplify Representation or Style, you stay on Masters representations. Please see image attached. Thanks.
DESCRIPTION: Using the mini-toolbar select from parent list and selecting the parent, the parent model name should appear in the message area. When you select a part in the graphics window, the selected model name appears in the message area. But when selecting the parent from the list, the parent does not show up in the message area even though the parent is selected in the model tree. Related config option that supposedly turns on the message log selection, but it does not work when parents are selected provide_pick_message_always yes JUSTIFICATION: In Creo 2.0 when you select a part in the graphics window, you can right-click --> Select Parent and the parent model name appears in the message area. PTC took this function away in Creo 5.0 We use this function a LOT in order to copy and paste part numbers (model names) into our PLM system, into emails, IMs, presentations...everywhere.
When a computer wakes up from Sleep or Hibernation, Creo will automatically throw a "Unsaved data may have been lost" dialog. This will occur once per wake. i.e. if a computer gets bumped a number of times in the workplace, a user could return to hundreds of these dialog boxes. There is some critical limit where hitting "OK" doesn't seem to work anymore, and the user is resigned to just closing Creo altogether. There should either be an internal limit of one of these dialog boxes (should not be just a simple interrupt style event), or an option to turn these off altogether.
When a rectangular range is created from right to left, an object entirely contained within the rectangular range is selected. When a rectangular range is created from left to right, an object which is partially in contact with the rectangular range is selected.Such functions are in part files and assembly files. Drawing files do not have this function. It would be very useful to be able to select a rectangular range for notes, symbols and dimensions in the drawing file.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.