Recently active
For Exporting from Creo (Save As) to DWG format, you can currently ONLY export 3D files as tessellated/triangulated even though DWG supports full 3D surfaces. Our users currently have to open the 3D models in Inventor to properly export. Please add support for exporting full 3D surfaces to DWG format and an option to have surfaces be the default export type for DWGs.
Enhancement Suggestion: With providing basic dimensions like for Block using Height,width and length, Software should create the model. We can draw the direct Block, Sphere, Cylinder, Cone options to create a new model without using sketch option.
When we have something selected, and if we want to unselect those objects, we nee to click on the background. For click on the background, and while working with big or complex models, we need to rotate, pan or zoom the view, for having some background to click it. It's some mouse clicks and movments not needed. My suggestion is to unselect objects by pressing the esc key, or by making the repaint.
In my opinion, the coordinate system, should have the planes inside it. CATIA and NX has the same approach and it's really useffull. Or at least, every time we inserted a coordinate system, could have the 3 planes, grouped inside coordinate system (planeXY, PlaneXZ, PlaneYZ).
A very useful feature that CREO should have, is extreme points for quilts and bodies.See the example from catiahttps://youtu.be/Zq253f1M7nE
Add the ability to change/show parameters units easily on Creo drawings without having to create additional parameters. Current functionality only allows changing parameter decimal place display - &volume[.1] = 25000000.0 Please add the ability to change/display parameter units without having to create additional parameters. &volume[.1][mm^3][display_unit] = 25000000.0 mm^3 or mm3 &volume[.1][cm^3][display_unit] = 25000.0 cm^3 or cm3 &volume[.1][cm^3] = 25000.0 Use case example: It's very common for to model in one unit system but to want to display some parameter differently on a drawing. Specific example - 3d model in mm-kg-s in Creo but this makes the volume parameter in mm^3 which create a huge number that is difficult to read on a drawing. Displaying in cm^3 makes more the information easier to read. The current functionality to show units on drawings requires several extra parameters, is difficult to setup, and doesn't display the u
Hello Creo gurus After some time spent on Swx and Inventor, I came back to my loved Creo. After a while, I realize that some features are really useful and avoid a lot of time-consuming operations One of these is the function to automatically select the axis on a cylindrical or conical surface, avoiding the need to really create the AXIS as a reference feature as we need to do (try to imagine in the case of imported geometry). Would not be nice if scrolling in the Query Select, in the case of Cylinder or Conical Surface there was an Axis? BR D.
Have the ability to add check surfaces to all tool paths to eliminate tool holder crash's. This tool path was Roughing using a window..
Have a simple check box attached to the tool that would not allow the drill, drill past the flute length.
The DEX is a great way of creating and managing concepts. But currently it is only usable for visual concepts because it is not possible to run a simulation analysis on a checkpoint. It would be great if this where possible because then the concepts can not only be made visual but also be checked on strength. For now the DEX is unusable for us because the simulation cannot be executed so we have to fall back on the old way of working and that is creating copies and change them.
In Creo Parametric / Options Modeller it should be possible to search for a specific variant spezification. We have a lot new of variant spezifications every day in Windchill. The Creo User has to create a CAD variant out of them and needs a serach functionality to find the needed variant spezification.
When replacing a non flexible component by a new flexible component, the flexibility of the new component is automatically deactivated. It would be fine if Creo ask during the replace process to use or not the flexibility for the new component as already implemented during the standard assembling process. Today, after a replace, the user must afterward reactivate the flexibility using the feature "Make Flexible" to reactivate the flexibility of the new component. Other problem, with the actual replace process, the user is even not informed that the new component contains flexibility and that there is maybe some values to change.
One of the improvements that should be made in sketch, is the symmetric constraint. Now it's only possible to create symmetrie by having an axis system, and applying the constraint only to vertices. it should be possible to do it to lines, arcs and circles.
While using fillet and chanfer option, in skecth environment, it should be possible to have the selected corners, with the same dimension. Now it's one of each dimension, after we need to constraint the dimensions to have the same value.
With regard to article CS282769 is suggest the following product idea: Add possibilities to created thread turning features on kinked profiles. This is possible with SiemensCycle98, but not in Creo NC. The turn profile in the example is colored in red
If a user creates a datum target area as a circle or square in a drawing, it does not adjust the size of the circle/rectangle area to match the scale of the drawing or view. Support says that this is the current functionality as these are symbols, which can't adjust the size based on scale. To me, this seems like an obvious oversight that should be addressed.
Article CS108304 address how to change the "origin" of the table so that as rows/columns are added or column widths are changed, the table will grow in the proper direction without having to re-arrange the table. Currently changing the "direction" in the Table Properties dialog box reconfigures (re-arranges) the table. The name of the command, "Set Rotation Origin" is not very intuitive. Suggestions: 1. Consider renaming command to something like "Set Rotation & Growth Origin" 2. If the rotation origin is set to the upper-right corner of the table, then when the table properties dialog box is brought up, then the "Direction" should be "Leftward and Descending". Currently, it work like this: a. Default growth direction of a table is rightward & descending, so the origin is the upper left corner. b. Origin is set to upper right corner. c. Columns added and/or Column widths adjusted to confirm growth is as intended (leftward) d. Table properties dialog b
The title says all, I think.The question's point is that not always you are interested in the regeneration of the constraints.For example you may want to maintain a certain position of the mechanism/assembly while you change a dimension of a single component and you want to regenerate only that without losing the entire position.ThanksBye
When adding a new symbol into a drawing checks for existing symbols and paths seem to be done. If the path or file name is not valid, Creo can exit. There should be a warning or error about the inconsistent data, but no exit. Related to SPR 9526144.
Please provide either an overall assembly/model or, better yet, a feature based regeneration/rebuild estimation. This would allow users to have better time management (e.g. this assembly will take approximately 10 minutes to regenerate, I should work on something else). It would also allow users to more accurately pinpoint problem geometry and features which are roadblocks to quicker regeneration.My current build is Creo 4.0 M060.
By introducing Unite technology, it is possible to handle and use foreign CAD data like native Catia V5, NX or Solidworks files as well as exchange formats like STEP and JT in creo parametric. To keep track and maintain foreign data, it is mandatory that the original files are stored in Windchill. So, it is possible to enrich creo copies with additional features/datums and - thanks to ATB - to update these, when the originals get updated by new versions. Unlike all the other formats, JT files can only by opened or imported into creo from local disk but not from Commonspace or Workspace. So, unfortunately there is no use of JT files stored in Windchill. So, please enable import of JT-Files from Workspace. Additionally it would be great, if creo would create "Source & Image - Links" when exchange formats were imported in creo files, in order to support the "ATB/Update" use case for them as well.
The idea is to create an edit external sktech button above the "unlink" button. This way, when you forget that geometry is driven by external sketches rather than internal sketches, you can jump into editing the sketch directly from the feature editing dialog rather then having to find it in the tree yourself.
Non regenerated elements, should appear in diferent color or texture. With this, user will easily identify, what geometrie, will need to be regenereted.
When we replace assemblies, it should be possible to replace sub assemblies by copy, with the replace command. After this option, it should appear the traditional assembly save a copy interface.
It would be nice if there was a way to undeclare parts/assemblies from specific Layouts/Notebooks within Windchill or from within the layout, and say "Remove All Declarations from Layout/Notebook". Right now, doing this on a part by part basis takes up way too much time, seems like a great opportunity for improvement.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.