Recently active
This is really applicable to large assemblies. When modifying "state" or "revision" (and there may be others) of parts/assemblies/drawings the software currently lists all parts assemblies that can not be changed by a "crossed out line" through the part/assembly. This is perhaps ok on a small listing but in my case my listing spans several 1000's......and I'm only interested in the few that are not "crossed out"......which can take some finding in this long list. There are workarounds but you have to be savy with the software order of listing. Not everyone is.....and so it is very easy for someone to accidently change the state or revision of many parts/assemblies intentionally. Therefore, it would be useful if we could somehow turn off all these "crossed out lines" and thus leaving only the parts/assemblies that this change would apply to.....
A system Parameter containing the working directory path would allow a drawing to be documented with the directory file location in which that drawing was developed. A requirement of some quality control procedures is to know and record the file directory of the source of the document. A Creo system parameter that can be accessed within a drawing would allow this to be parametric instead of having to enter the path manually. This would be a 'Creo' system parameter - available within drawings without the use of any product data management. Original idea here!
PTC should really come up with a better way of creating Detailed Drawings. It may be my ignorance, but the interface seems like it hasn't been changed in 20 years. 1. Project the 3D part edges into the Drawing instead of looking at the 3D parts through a glass type environment. 2. Allow the designer to define section cuts in the drawing without having to create the sections in the 3D Assembly. 3. Allow the BOM Balloons to be able to add balloons to a part after the qty has been reached without having to create REF balloons. We use the qty in the BOM on the drawing for purchasing (i.e. qty of 1) even though we may need to balloon the part in several views. 4.if item 3 is not feasible, then allow the REF balloon to have the same capability of merging balloons together like the regular balloons. Currently this is not avaialble. 5. If items 3 and 4 are not feasible, then allow the user to remove a leader fro a REF balloon. &nbs
when we call &today's_date parameter in drawing it takes the value as todays date. but when we check the properties of parameter it has became hard cord as mm-dd-yy instead of &today's_date. that means if we modify the file still it will referring the old date instead of newly modified date.
The Creo startup (license configuration) window sent to background application in Windows 10 and requires additional selection in order to make this window visible. Current Creo version is 5.0.3.0.
There are times when a design MUST be checked in to Windchill but the system settings for ModelCheck prevent it because of too many detected errors. This idea is to add a button to the bottom of the ModelCheck main page for "Allow System Administrator to force check-in". If selected, the user needs to get someone with system admin rights to come and login to override the ModelCheck check-in block. A user credentials pop-up would appear and the system admin would log in to allow the check-in to continue. Users in the Administrators group only would be allowed past the ModelCheck block. I would hope there isn't mush usage of this override, but I have seen a few instances where it was necessary. I would hope that system administrators then work with their users in educating them on how to create parts and assemblies to get through ModelCheck successfully.
You can not add the desired color to the system color and set it to be selected next time. Currently, if there is a desired color, I work with RGB every time and assign it as a system color file. The inconvenience of adjusting RGB again is to reapply the previously used colors. It seems easy to register and use your favorite color.
Since Creo 4 balloons have been updated to snap tangent or perpendicular to the object they are detailing. --This needs to be updated to allow users to turn this functionality off. It would be great if you could select other snap options as well. --Allow users to select all snap lines and interface similar to the xsec line manipulation allowing for any angle to provide consistency and symmetry within drawings. BOM items could be more easily placed initially. --When placing balloons by view, snap lines could be shown to select what sides of the model new balloons will be applied to initially. (If we know we want them only on two sides of a view, starting with everything there would save time and we are not all using MBD so this is tedious and unnecessary). --It is worth noting that drawings with many balloon items look like lazy amateur hour compared to drawings previously produced with CREO-- Please end amateur hour !!!
i'm using creo 4, and still i've noticed the same bug of creo 2. if a make a backup of an assembly in a specific folder, every time i save, the new saved parts or assemblies o modified elements are saved in the backup directory and not in the working directory.
When the density of a part is not defined and the mass calculation is run, it pops up a dialog asking for the density. This needs to allow material selection as an option. When it is run on an assembly full of parts with undefined density, it still asks for the density for one part. Enter it, then it asks for another part. Enter it, then it asks for another part. Etc. There is no chance to cancel, and no chance to select materials. The density selection dialog needs to be replaced with the opportunity to select materials, define all densities at once in an easy table format with tools for easily applying the same value to multiple parts, AND the whole process needs to have a Cancellation button to end the attempted calculation.
Can PTC please change from an 8 pen plotter to something that can use Wndows printers and WYSIWYG capabilities? I know you can change the plot files but it seems difficult to get the printer to be exaclty like the Drawing when printing to a company printer or a PDF.
When creating a flushed hem flange, obround, rectangular, and stretch bend reliefs are not available. The tab is active like they should be, but an info message is provided that only rip reliefs will be created. Add the capability of using these bend reliefs with flushed flanges.
The old "Turbo Pattern" process of creating a surface, solidifying it, then patterning that has been consolidated into what is now called "Geometry Patterns". Unfortunately this is only available in solid modeling, not the sheet metal module. The fact is that sheet metal perforation for EMI and airflow for thermals is a common design in many fields.The fact that you can't create vent holes in sheet metal with the geometry pattern process is a huge miss. It also shows the inconsistency within Creo between modules. Please enable the ability to create geometry patterns in sheet metal parts similar to how it is done in solid mode.
Current method uses the right-hand rule to mirror a part and can flip the part in ways that are not intended. Basically the part has to be designed in a certain orientation to mirror correctly. It is based on the original Csys for the part. Suggestion is to allow picking a different Csys to use for mirroring to correctly mirror the part as intended.
Sometimes when we make a replace feature, or a edit reference, the final result isn't the desired one, due different directions, in the new features or references. This leads to the need of edit the features.So my idea is to have in the edit reference, replace feature feature, past feature... Having the option of change direction. See the next example. https://grabcad.com/tutorials/how-to-do-the-replace-command-in-catia-v5https://grabcad.com/tutorials/how-to-do-the-replace-command-in-catia-v5
You can currently assign different materials to different instances, red_6_12_nylon and yellow_6_12_nylon, but as soon as you bring in a second instance, the are all the latest color added. The suggested copying all solid surfaces work around is not acceptable for many models. This was requested in 2014 and still not fixed.
When deleting the base line for ordinate dimensions, a message will appear (see picture below) saying that the dependent dimensions will be deleted as well. On some drawings there are several such baselines, on one axis. Now I can not find which dimensions are affected, which are dependent and which are deleted? (no dimensions are highlighted) I'm sure I'm not the only one in the world who would.It just gets stupid when measurements are shifted to other sheets. If a measurement is accidentally deleted it can have fatal consequences for the part quality. Up to the failure of transmissions, axles, engines, steering systems, airplanes.... Please show the dependent dimensions, from the base line of an ordinate dimension
For Creo integrated with Windchill, one of the ultimate goals is to take parts lists off the drawing. There is some support to accomplish this passing find numbers over, but much of the setup is manual. This should be better integrated through some of the following functions. This can help support the path to MBD as well. Automatic Find Numbers without drawing tables 3D BOM Balloons/callouts for MBD views Improve integration of Find Number to Product Structure (it can be done, but can be better) Better passing of material information to WIndchill Ultimately product view with better usage of product structure, and linkages to models (integrated 3D model and design presentation in one pvz)
We are implementing bulk items to enable a better workflow with our new WindChill PLM system we are implementing. We found that we cannot see the units for parameters that display during the user-input field. How does the engineer know what value to enter if the engineer can't see the units? The engineer brings in a library part for paint and adds it to his assembly. It prompts to enter in the value without showing the units! He would be clueless! The only way for him to see the units is to put in some random value and then go into the component level parameters for the bulk items to view the units and enter a more accurate number. The units should definitely be displayed. It would also be nice to show the parameter description, if the librarian needs to give some sort of instructions. Furthermore, the unit value should be editable. Let's say I am adding paint to a screw. I would want a smaller unit then if I added paint to a car! Please help with at least the unit display. If we can g
In Creo 6, PTC made significant improvements to the Creo Model Tree - one of those features was adding a Windchill column if Creo is connected to Windchill. This is really helpful for users. However, please also include the 'Change Status' and 'Compare Status' in the Windchill column for even more helpful information for users. Compare Status - help users identify name conflicts with objects in Windchill. Change Status - Helpful to know if any object has a Problem Report, Change Request, or Change Notice. Please include an easy way to navigate to the related change information.
There are units within WindChill that can be specified for a BOM that Creo does not have. For instance, when working with WTParts in WindChill, you can specify to use a certain number of 'drops' of glue. However, in Creo there are no 'drops' in the units drop-down for a parameter value. If we would like to make this as smart as possible, we would like the units to match up with WindChill. Thanks!
Referencing Article: CS275505 - Are Appearance States Accessible via Toolkit At present (Nov. 13 2019), this functionality is not present in Creo Toolkit. Our intent is to export combined state data to a CSV file, then import these settings into other Creo files, so we can apply the same combined states to other models. At a minimum, the request is for: ProAppearancestatesGet() The article also requests additional functionality: ProSolidAppearancestatesGet() -> Collect all AS of a solid ProAppearancestateNameGet() -> Get name of an AS ProAppearancestateNameSet() -> Set name of an AS ProAppearancestateActivate() -> Activate AS (there is an UI button for that in the view manager dialog) ProAppearancestateActiveGet() -> Evaluate the active AS ProAppearancestateActivestateUpdate() -> updates the AS, which is active in the specified model. If the appearances of the surfaces have changed, then calling this function ensures that the active AS
Regarding GOST 2.307-2011 "Unified system of design documentation. Drawing of dimensions and limit deviations"http://docs.cntd.ru/document/1200086238<https://nam04.safelinks.protection.outlook.com/?url=http%...4.3 reference dimensions are indicated by the sign "*", and in the technical requirements write: "* Dimensions for reference". If all dimensions are reference, do not mark the asterisk "*", and in the technical requirements write:"dimensions for reference". In Russian localization for Creo Parametric all references dimension display text "ПРИВЯЗКА" instead "REF" in English version. So, no need extra effort and change a logic of a software to meet russian standards. Need to change localization text "ПРИВЯЗКА" to "*".
With regard to the Sequence Clearance “Start and END Point” I would like to have access to the: table repeat region Report Symbol, the “Machine Tool Setup PPRINT” and/or the “Parameter UI” option. The justification for this manufacturing request is safety and NC Program accountability. Certain (Mazak) 5-axis machine tools utilize Tool Center Point Control (TCP) (G43.4) to translate the tool-tip path defined in the part program into the position and orientations for the machine’s linear and rotary axes. Within particular zones of the rotary axis the tool pivot motions will translate without issue but other (particular 180 degree) translations of the tool vector will whip the tool into the machine or the part. A simple solution to insure a controlled rotation is to start and end each Sequence at a common (safe) rotary centerline. I typically name this point “PT_43-4_ROT.” I would like to have this Start and End point flagged as a double check in the O
I would like to see an option to zoom the model to 100%, actual size, on the screen. This would make it much easier to grasp the physical size of a model. I have seen many instances when a small detail is perceived as much larger than reality do to the zoom of the model and large details perceived as small also.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.