Recently active
Currently HOLE_DIAMS only allows checking if users are using a standard diameter hole if they are using the 'hole' feature in Creo. However, it's also common to create holes from extrudes. Please expand HOLE_DIAMS to also check for holes created from extrudes.
Several checks in ModelChecks can use external list files (HOLE_DIAMS, etc.). However, ModelCheck lacks a lot of functionality when using external lists: User usually cannot see what are the allowed values in that external list Users cannot pick/update from the allowed values. Please make external lists operate like internal lists where allowed values are shown to users and users can pick from the allowed values.
As per the help center, layouts can be assembled into a Creo Parametric assembly as a component, similar to using a skeleton model. Any 2-D geometry in Creo Layout that is designated as Public becomes curve geometry in the 3-D assembly that can be referenced. It seems like text is not an entity handled when importing layout features into the 3D model. In our company, we would like to create an assembly of a plant (for example) on the layout. This works out better with the text in the assembly for reference. The problem of not having text also shows up when we create drawings-Drawing will have no text to complete the design. Can we get a text in 3D assembly?
The current functionality is that when a repeat region on a bom table is changed from one simplified rep to another, the custom bom balloon symbol is reverted back to the default. This is an issue since: 1 - it shouldn't reset since we use custom balloons and the default creo one is incorrect 2 - what if that table is not using the default balloon symbol that other tables are using 3 - the “default_bom_balloon_type” dtl option does not work if the symbol is not already in the drawing itself. Since we use formats, we can't load symbols into our drawing for the option to work. Thanks!
When a user add a custom Material Creo saves the new material in C:\ProgramData\Creo Flow Analysis\CustomMaterialsDataBase.smat. I need to customize the path of this file and I searched documentation but I couldn't find then I opened a case to ask it : C15618925 The customer support talked about article CS300506 Then I'm asking a config.pro / sup option to customize this file location, like for example: pro_material_dirpro_sheet_met_dirpro_smt_params_dirpro_group_dirhole_parameter_file_pathsketcher_palette_pathpro_note_dirpro_palette_dir pro_symbol_dirsymbol_instance_palette_file etc... Thanks
Two improvements for MBD: 1. Option to Auto center dimension by default. I suggest config option: auto_center_dimension_mbd yes*/no(This option already exist for drawing dimensions: config.pro option auto_center_dimension). 2. Snap lines for dimensions in MBD. This option would be available for dimensions which are positioned on the same plane.(This option already exists on drawings). Regards, Domen
BOUND_INFO currently Checks that no views, entities, dimensions, symbols, notes, and tables lie outside the boundary of a drawing. But GTOLS are not checked. This idea is to include GTOLS as well to check. Not sure why PTC never thought about this or why no users reported or requested this. I submitted a PTC case and was closed asking me to submit a product idea!
An analysis tool in 3d environments would be useful that allows you to generate a table with the coordinates of the points present in the model with respect to a chosen coordinate system.
Per Article CS9099, it is intended functionality that if multiple Creo Parametric windows are already open, a new window is not automatically activated after retrieval of a model from Windchill via the Open in Creo action from the embedded browser. The purpose of this enhancement request is to change this behavior and automatically activate the new window specifically in the scenario of using the Open in Authoring Application option when creating a new CAD object in conjunction with creating a new Part. In this use case, the user typically intends to work on the new model immediately, and it would be optimal to not require manually activating the new window.
User should able to read the Capping Information through Toolkit API
A graphical interface would be useful to act on the program of a model (part or assembly) without having to use a text editor.
Fill command, should be possible to be created without the need to create a sketch. It should be possible to select curves ou edges directly
1. open *.ASM in Creo Session 2. Run "Model Check" 3. Click Error/warning 4. Report Expanded. 5. And again Click Error/warning. 6. Expanded report Should Collapse.
It would be pretty nice to be able to export WEB based HTML versions of our Creo Parametric Files. We currently use E Drawings Professional to do this. It would be nice to not have to use a COMPETITORS software (E Drawings is part of Solidworks) to accomplish this. We use this to allow out customers to view our designs via any web based browser. No plug ins or anything required. Our customers DO NOT want to have to download any other software to see our files. E Drawings does this for us. The can then rotate the models around, and see our current progress of mold designs.
Inserting image in a format like we do in a drawing or layout. Now it is not possible but it would be usefull.
All Tollerance tables (also holes and shaft) automatically add to drawing when we use ISO standard and we have create_drawing_dims_only on yes in cofing.pro.
Could be very usefull a parametric and associative tool to create new and customized font that we can use in sketch to model some text. So we can change every typeface and see automatically the result.
When creating dimensions in drawing operations We have to press ctrl too much. I want to go back to the dimension generation method of wf 5.0
Currently (up to Creo 7) the Creo hole note is attached to an edge of the hole feature by default. It does not add the hole surfaces as sematic references. This idea is to re-write the code so that the hole note attachment picks the hole surfaces and automatically adds these as sematic references for MBD (Model base definition) purposes. Currently the user has to go in and redefine every hole feature to add those surfaces. See attached video from PTC.
If you replace a part in a assembly by a part of a interchange assembly you have only two columns for part name and common name shown in the dialog. Is it possible to view the parameters defined in the parts in the Model Tree so that you have more information to decide which model to use to replace the existing model?
This is a follow up to Article - CS179417. Currently (through Creo 7) when the user selects the "Show Model Annotations" in MBD annotations (dimensions) appear on the screen. The user can not select these dimensions if the Annotation Display toggle is turned off however. This leads to user frustration. The user is given no feedback as to why the dimensions can't be selected. The idea is to either: 1. Allow the user to select the annotations / dimensions even if the toggle is turned off and then have them disappear upon the next screen refresh 2. Have a pop up warning notice that suggests the user turn on the Annotation Display toggle so that the dimensions can be selected.
Threaded Hole Enhancement: Create a standard feature type, similar to threaded hole, which incorporates a simple extrude and a threaded hole to create the standard "threaded boss" feature with sequence of placement and reference handles. Options to include:Boss shape: square, rounded corner square, roundTop options: flat top, fully rounded top The current solution in Creo 4 M060 (and our corporation is not on it yet, but will be the same in the latest Creo 7 version as well) is to either copy the features or use a User Defined Feature to re-create them across models, however these options do not provide the ease of use and modification that the standard hole type feature could.Use Case:These kind of features can be repeated 100 times in a finished casting model, varying size, thread size, shape, etc.
See attached GIF. Currently when doing a drawing, you can select multiple dimensions and move them together. When working with 3D annotations in the model however, if you select multiple dimensions it only moves the last selected dimension. For complicated parts where multiple dimensions need to be created it can take large amounts of time to reposition all of the dimensions one by one as a new one is added.
Currently when geometry is created, Creo does not add the surfaces as sematic references to the dimensions that control that geometry. Per PTC: The Product Manager confirmed that this has been requested by customers before. It has been explored as an option to include but the decision has been made not to add. For simple geometry such as a block, it is easy to identify the correct surfaces, but as sketches become more complex, the automatic addition is not as robust. So rather than adding wrong or unneeded references which would need to be removed, you will need to manually add the references. This idea is to change the behavior so that simple geometry (ie blocks) for which it is easy to add sematic references to go ahead and do so. Certainly for us and I suspect for the larger community there is more blocky geometry than not and auto adding these surfaces would save time.
I would like to see a balloon snap line option to create a "free floating" snap line. The only options available are offset from view boundary and off set from object (any straight line on view). We can drag the ends to shorten or lengthen the line, but cannot change the angle. There are many times that I want an angled snap line to arrange balloons between parts in an exploded view but am limited to whatever angle I can find in the view.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.