Recently active
Windchill customers use more and more an advanced publication technique for their CAD assemblies, especially when the assemblies become large. It’s positioning assemblies. Basically, the worker opens an empty representation of the assembly, list the first level objects, get their position and stores them – it’s super fast. But this mode has some limitations : https://www.ptc.com/en/support/article/CS130991?&language=en&posno=1&q=positioning%20assemblies%20assembly%20cuts&source=search • Process Steps • Flexible Components • Harness Features (identified using the out-of-the-box recipe setting adapter/harnessFeatList= , i.e. empty) • Other Assembly Level Features (identified by using the out-of-the-box recipe setting adapter/assyFeatList=911 915 916, i.e. Hole, Slot and Cut, respectively). Until the latest releases of the publishing adapters, having a mix of Creo Parametric and any 3rd party cad model (using Unite) was also not supported. To ke
The purpose is to switch from the ProE font.ndx/stroked stick font to a modern font. This helps with: WYSIWYG Exporting while maintaining real searchable/editable text...especially for PDFs Creo4 essentially disabled font thickness control (except for entire notes) while the new Bold feature doesn't visibly bold for the stroked font styles. General downstream reuse is impaired by using a stroked font instead of a modern universal font. It should at least have the following features/compatibility: According to the standard, it should be: All caps with exceptions Gothic/Sanserif (without flourishes) Single stroke (all letters are the same thickness everywhere in the letter) To be useable it should also be: Monospaced (spaces and letters take up the same space)...this is essential for readability for text alignment and tables on Engineering drawings) Comprehensively changed and controllable with config options MBD compatible (ideally updateable with dwg config or
Add the ability to flip the direction of a 45 x D chamfer. This would help in controlling how the annotation is displayed (on bottom or side). Discussed in this community post Re: Orientation of chamfer dimension in drawing - PTC Community
When creating BOMs and other tables in drawings you should be able to snap that table (from edge or vertex) to the drawing format. Defining table position by absolute position is a cumbersome workaround which requires memorisation of the measurements of the particular drawing format being used. This will make drawings, cleaner, more presentable and easier to execute.
Need separate columns for locked status and checked-out status in Windchill Workspace. Currently it is part of General Status column where checked-out symbol is shown when that object is checked-out by logged-in user or any other user. But when we use preference setting Automatically lock objects added to workspace set to YES, the status of objects is shown with lock symbol overwriting checked-out symbol if that object is checked-out by some other user and not by logged-in user.We are using Windchill 10.2 M030-CPS08 and we have preference setting for Automatically lock objects added to workspace set to YES.But we are facing issue with objects which are checked-out by some other user but it does not shows the checked-out status if object is locked in workspace. Here it is overwriting check-out symbol by locked symbol. So user are not able to recognize if the object they are using is being modified by someone else or not, hence sometime users are using out dated or non-latest itera
Starting Creo 3 M130 and Creo 4 M020, PTC is not allowing repeat region drawing tables that use cparam within the table or it's relation to have a row fixed. According to them, any previous allowance was just an oversight as cparam is not a decent identifier for their repeat region code. We use cparam to help include bulk items in a bom table. For instance, the unit will says OZ and the QTY will say 9. The cparam is the value of a parameter which is unique within a given assembly. In this case, the bulk item parameter UNIT can be different in each assembly it is in. The table then reads that info.We would like PTC to allow for the usage of cparam and allow the table to be fixed. If anyone has any good ideas how we can work bulk items in the table without cparam, until this is implemented, I am very interested.
Hello Community In the model tree it is possible to indentify family table member by the generic name between smaller+bigger signs. Like "member_name<generic_name.prt>" Now we would like to have similar information about the generic name, if we have the generic itself assembled. in this way we can easily identify, whether a normal part or a generic part is assembled. e.g. "generic_name<generic_name.prt>". Thanks in advanced for your votes!
Because there is no such multithreading mode for the xtop process. This makes Creo Parametric much slower in opening IGES,STEP, ... files the other CAD Software.
Oftentimes it is handy to add a GTOL underneath a note, for example when calling out a hole (e.g. a positioning tolerance). Currently, the interface does not allow a GTOL to be placed underneath a note. https://www.ptc.com/en/support/article?n=CS284792 The GTOL becomes the primary entity, and the note gets shoved onto the elbow. It would be optimal if the note could remain off the elbow, and the GTOL attached below it. Currently, users hack this in one of two ways 1. Create a note and use the @[text@] notation to manually draw the GTOL box 2. Abuse the Additional Text feature on a GTOL frame to add the note above/below it
Current Situation 1. First step after adding a new bore design feature to a part is to define the position of it. 2.a) In the next step you can define the diameter of the in this case not threaded bore and add a chamfer to it. If this sequence is fulfilled the chamfer diameter is chosen automatically to a useful diameter. For example in case of adding a chamfer to a 10 mm diameter blind hole, Creo predefines this chamfer diameter to 12 mm. This works only if the hole has no thread. 2.b) Contrary to this procedure Creo is choosing a completely wrong chamfer diameter if the bore is threaded. For example if you want to create a M5x0.8 thread and then klick on the chamfer button the predefined diameter is 11.20 mm, which is by far too big. Could-be situation Maybe there could be implemented the same functionality for threaded holes as it is well done for non threaded ones. This would save time, especially when there are a lot of different threaded hole diameters in one part,
With active section in a model the boundary lines are displayed in LETTER color and there is not HLR for These boundary lines. So the boundary is always shining through which is disturbing. See also article CS238170 (https://www.ptc.com/en/support/article?n=CS238170).
When creating a hole using the hole tool, have the option to add an exit counterbore. An exit countersink already exist. https://community.ptc.com/t5/Part-Modeling/Hole-feature-Exit-Counterbore/m-p/638690#M33216
At the moment Creo works with inheritance feature in the following way.- Creation of an original model- In a second model this is built in by means of inheritance feature- If changes are made to the first part at a later point in time, the inheritance CE must be selected in the second part and the base model must be called up explicitly with the RMB and the inheritance updated. This costs an enormous amount of time and also causes errors, because the updates from the base model are not done automatically. Especially if several finished parts are derived from the base model (blank). In conjunction with a database, e.g. PDMLink, each released model must then be incremented, checked out, regenerated, checked in and released. My proposal:Introduction of a new config.pro option.UPDATE_INHERITANCE_FEATURESTANDARD --> same working method as beforeON REQUEST --> User is asked once per session when a part-/assembly is called, whether the Verification features should be updatedAUTOM
As of current versions 4 to 7 , you'll notice that parts with defined flexibility , that are locked in the windchill workspace, will not allow you to to vary the dimensions or parameters, these will have a lock icon before them. This is only a temporary hindrance, as assembling the part and doing an edit definition will get you to the varied items menu without a notification. The idea/request is to get away with that first blockage and allow us to fill in the varied items of locked parts upon assembling.
the goal is to - Inherit driving dims with copies of geometry and fusion.- Link intent reference features to manage the semantics of patterns with driving dimensions.- Improve PVZ, STEP AP242 and QIF exports.- Extend the GD&T Advisor use to inheritance dependence parts.- Continue exporting the geometry model with middle Dim boundaries option actually my issue is when I practice a top down design process. I define reference dims in a skeleton. Then I share the geometry in components. - when I create a drawing of that models using copy of geometry, the principal dimensions are missing (must be created) - if I create annotations in the skeleton to share them with the copy of geometry, it's double work. Other thing if I create annotations is the TA. I'm able to use the annotations for Tolerance Analysis, but their dimension boundaries do not control the geometry, so the export for NC cannot be centered in the middle boundaries. And if I use the driv
Hello, In many cases in our database, screws and nuts have threads modeled with the feature "COSMETIC THREAD". When assembling a screw on an existing nut for example, IFX diameter detection features fails and propose the inner solide surface diameter (which is smaller) compared to the real thread diameter located in the Cosmetic feature (see Screenshot) Can you please allow IFX to detect cosmetic features too? Otherwise if designers are not carefull they will have assembly problems (screw diameter too small for nut…) Related PTC Ticket : CS15658810 Related SPR : 11285257 Thanks in advance
We can create restricted parameters, but when using these as a template , this functionality is lost. Please add the restricted list to the new part by template menu.
With Creo 7 it is now possible to use Bodies as the Base for a copy geometry. These Copy geometries will include solid geometry instead of only surfaces, like before Creo 7. Especially for seasoned users it was always clear, that a copy geometry will never have solid geometry nor change the mass but "just" copy surfaces and / or datums. Idea is to adapt the model Tree Icon of the Copy Geometry to show if the copy geometry includes bodies (solid geometry) or only surface and / or datums. The workarround to use the "Contributed Body" Column of the model tree is known but a change in the Model Tree Icon would be preferred
Hello, In Creo Parametric 4.0, opening an assembly in automatic Rep allows for faster opening times. the parts are made of "light surfaces" and no modeltree features : To be able to refine the details of parts (have access to more measures for example) : - "light surfaces" can be transformed into "surfaces" via ==> "Retrieve geometry" feature: The problem is : retrive geometry is only available for surface selection, if we select the part containing the surface in the modeltree ==> "retrieve geometry" is not available. Can you please make "Retrieve Geometry" available also for modeltree selection? Thanks in advance
Hello, If you create a sheetmetal in Creo Parametric that has a corner of a V shape, like this one below : If we add chamfers to the edges, the flat preview shows incorrect dimensions : The problem is that the feature FLAT PREVIEW relies on these 2 parameters : - SMT_FLAT_PATTERN_LENGTH - SMT_FLAT_PATTERN_WIDTH These 2 parameters calculate dimensions related to the pilote surface. Can you upgrade the feature so it gives a correct calculation also for chamfered sheetmetals? Thanks in advance
Currently, it is not possible to rename a parameter. Users have to create a new parameter, update relations and then delete the old parameter Add the ability to rename a parameter : - using Toolkit API - interactively whithin a Creo session
with the new multi-body functionality, introduced in Creo 7, you have the option to select a body and RMB "create part from body". this is significant enhancement. In order to complete the designer need two option are missing: 1. having the possibility to select multiple bodies from tree/screen RMB "Create ASM from bodies". the outcome of this should be an assembly with each body defined as a part and located at the relevant location ( according to geometry placement in part ) 2. each part should have the geometry as a features rather than external geometry feature. Having those options will improve design process.
Below a list of problems I ran into when using the weld module. I will update this list when I find more. It's not possible to flip weld annotations in 3D, only in 2D. So when using MDB it looks ugly (PTC case) The tail of the annotation stays on even if you turn off the sequence ID and the note (PTC case). Creating a sold weld is nice because you can use it in Simulate. But when you create welds in a way you also get weld annotations that can be used you ran into the problem that the welds interferere in the corners and therefore simulate can't mesh. Putting it into one set solves the issue in Simulate but then the welds are not houw they are placed in the real world and therefore the weld annotations are incorrect. Creating a double weld with unequal lengths gives an incorrect weld length in the annotation. Because it simply sums up the weld length and divide by 2. So a weld which has a length of 50 on one side and 40 on the other gives a weld annotation stating that the
>We would need the "volume helical sweep" (picture 1) feature for a processing with end mill cutter.< Currently it is possible to use the feature for grinding wheel applications, where the tool-axis of the grinding wheel is horizontal to the workpiece-axis. (picture 2) But it is not usable for a process where the tool-axis is orthogonal to the workpiece axis. For example with a end mill cutter. (picture 3). There gives a possibility in the setting "Adjustments" to turn the tilt-Angle. But this doesnt work. (picture 4). It would be very important for our company that this function also works for our application. Thank you very much.
So far, there is no Toolkit function to update the restriction definition of parameters.There is only a workaround by using macros (see also PTC article CS235369).However, the use of macros is not version safe: A macro that works in Creo 7.0 may not work in Creo 8.0.Therefore, I would like to have a corresponding Toolkit function!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.