Recently active
When I installed Creo 7.0 in a Japanese environment, only the help from the start menu is in English.Help should be installed in Japanese. In Creo 2.0, help was installed in Japanese.
Hello Product manager, Creo drawing datum point tag display should be enhanced in such way that it should stick to the datum point or required setting or required feasibility to move the datum tag in drawing. It is giving very non satisfactory result in terms of hole table using datum point, i have attached image please go through it.
In technical drawings of sheet metal models. The flatten views are not updating automatically. Customers are wanting to be updated automatically. Can these views be automatically updated?
On delete confirmation popup change default action to "Ok". This allows use of enter from keyboard when deleting especially multiple items. Same behavior preferred to be on every similar situation. It should be confirmation always, not reconsider.
It would be intuitive if Zones were displayed and activated from the Sections grouping that already exists in the Model Tree. Zones are created via the 'Section' cascade in the Model tab in the ribbon, are named with the same XSEC naming convention, and are listed in the 'Section' tab in the View Manager - so I think it makes sense that they should also exist in the same place in the Model Tree. Due to this inconsistency you can also only activate Zones via the View Manager, whereas you can activate other sections from the Model Tree. See below, showing zone sections XSEC0001 and XSEC0002 being categorised as Footer items, alongside a planar section as a Section item.
At this time up to creo 8.0.1 if parts fail to solidify in an assembly , f.e. by importing an assembly, one needs to open each file and update the warning to ingore it, and save that part.Please note that ignoring the warning is not enough to save the part, you must also make save-able change ( f.e. setting a meaningless parameter to another value). To avoid doing this , there should be an option to ignore all the solidification warnings in an assembly and have those changes saved in all underlying parts without further digging and grinding through the structure.
In the family table, we can do the library creation in detail but sometimes due to the addition of a lot of dimensions makes the user to have improper visualization for better understanding the model and its data. So there should be a way where we can add the image of the model where the designation is mention like we have in the advanced framework extension. It will add more value to the family table for better visualization and understanding.
Bonjour, Currently the same colors palette is defined for 3D & 2D. Sometimes, for a specific department we need a different one between 2D & 3D. So we would like 2 parameters to defined a 3D palette & a 2D one. Thanks. Fabrice.
Description Is it possible to add all instances of Family table as variants in the configurable module at once ? Is it possible to call all the family instances into configurable module at single shot rather than calling them one by one ? Resolution Not part of Creo Parametric functionality: each instance must be added individually. This task can take time, but it is done once, and you have the possibility to add any new created instance at any time. But when selecting the Reference TAG, Creo Parametric is able to retrieve the same reference in each instance. To request this functionality, refer to Product Ideas @ PTC Community.
Actually there is no config.pro option for an automatic activation of the option “display model” in the cl player This option is useful when we import tools with "use outline" option in order to see the real shape of the tool
in Drawing mode It should be useful to select 2D entities with lazo option. Actually it's only possible selct entities with rectangle or single selection
As of today hole table has the ability to show limited information about a hole. basically it allow you to show X,Y & Diameter information and that's it. in order to add further information you need to create special parameters, Manually for each feature and add them to table ( see recommended procedure here ) . Having the possibility to read feature characteristics, by selecting from a list, would be a significant enhancement to tool capabilities. A must characteristics would be Depth as it relevant for both Hole & Extrude ( remove ) which include for hole table.
Hi, In the drawings standards, section names are: A, B, C, and so on.. (Except for the letters I, O, J, ...)Asking to set the section names automatically A, B, C, instead of XSEC0001, XSEC0002, ....? If this is important to anyone names such :XSEC0001, XSEC0002, please give us the option to configure it. Yosef
When creating a detail view on a drawing, for instance to show the details of the text that is included in a model, it may be necessary to rotate the view in order to be able to read the text. This type of rotation is allowed and encouraged by drafting standards, with the view labeled as "Rotated." I understand that PTC's perspective in the past has been that the detail view should not be allowed to be rotated. I would encourage PTC to reconsider this, because the necessity requires a very complex workaround.
It would be convienient to have the start surface of a fasterner which is tangent to a curved surface and normal to a hole feature. This would be useful in situations where a grub screw needs to be added to secure a shaft/collar etc.
Since by dading dimension in MBD a model can be fully dimensioned, it should also be possible To drive the model with these dimensions. This is also an easy workflow to parametrize imported models like step models again. Nb: Solid Edge has this functionality already.
Suggestion: When inside Sketch add Patterning Command to all patterning of common sketch entities, also allow to make sketched pattern instances variable.
Issue:Unable to search for all edges using “Search tool” in the part having specific edge length.Issue description:• Unable to search for all edges in the part using “Search tool” having specific edge length.• The expression from the “Search tool” does not have the criteria to search all edges having specific length.Steps to reproduce issue:• Open a Search tool -> Look for "Edge" -> Look by "Edge" -> Expression -> Criteria -> Find nowExpected result:Can able to search all the edges in the part having specific length, so that user can able to select all edges in one go to perform any operation.To reduce the number of click for the selection of multiple edges during the creation of chamfer on multiple edges of same length.Reference data:• clp2105241520_sheet_box.prt• Search_Tool.JPG PTC CASE 15931531 - SPR 12785211
Currently, notification center message need capture as a snapshot and convert to required format by manually typing before perfroming any investigation. This consumes lot of efforts when list is large. If PTC introduce a export as an excel, CSV or .txt file, it will be really help full for user during investigation phase.
I recently switched from Creo 2.0 to Creo 8.0.Visually I find it very annoying that in Creo 8.0 the highlighted lines increase in thickness (See the two attached images).I suggest adding a config option to come back to the highlighting with thin thickness line.Thanks
-In a part with several level of inheriance feature, if we want to show a PMI come from the source model, it’s mandatory to show this PMI in the source cad model. (each level of inheritance feature)-This step take times : open source file, show PMI, go to the first level of inheritance in the new part, update the inheritance feature, show the PMI …. And same operation if you have a second level of inheritance….-In some case, with Windchill life cycle, the user is not allowed to modify the source file for show the PMI, but only the inheritance model.It was very usefull if we can just show the PMI in the inheritance part without modify the source file.
Now Creo Parametric save modified size of dialog boxes in session. Each time we start new session we have to modify size of dialog boxes once again. I would like Creo saved pre-established size of dialog boxes.
When trying to open drawing that reports missing model, give user options like: - Open drawing and suppress views with said model. - Open drawing and Delete related views and missing model from drawing. - Point to renamed model and open. (Sometimes models are renamed and unless you have drawings opened at same time this can create problems, especially if there are a lot of drawings that reference said model) Currently, user has to use workarounds to do these things and get the drawing to open.
As per articles: CS274910 CS30578 CS159848 There is no way to open *.sdexp files in Creo Parametric, ideally, we would like to convert a library of *.sdexp files into a format that Creo Parametric can read. This would be required so that companies can migrate from Creo Elements/Direct to Creo Parametric and still be able to use the legacy files without having to manually open every single file in Elements/Direct and then saving as a *.pkg or another format that Parametric can open or import.
Have a temporary section view so when I'm working in my 500 part assemblies I don't have to scroll down through my tree for 5 mins to activate or deactivate a section view.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.