Recently active
Add the possibility to do Direct Modeling into Creo Parametric with the same functionality as Creo Elements Direct has. So a designer can choose at conceptual phase of a project to get quick designs easy to modify/change and If the design is more clear: parametrize this model. Add also the push and pull functionality of Creo Elements Direct and the parts library.
Hello! ProTookit provides 2 matrices (retrieved with ProViewMatrixGet and ProWindowCurrentMatrixGet) which describe model projection from 3D model coordinates to graphics window. These matrices are some abstraction and cannot be explicitly used to set up OpenGL matrices. In case user addin needs to render additional custom graphics, which shared the same 3D model space, one have to figure out in all the details how transformations Solid CS -> Screen CS -> Window CS -> window pixels are designed behind the scenes. This is actuall gettign harder with perspective projection. There are 3 suggested ideas: either provide more detailed information about how API matricies can be used to produce OpenGL matrices, or, provide new API functions to generate OpenGL matrices, or, (as most CADs actually do) setup OpenGL matrices when rendering events are sent to toolkit users. Thank you in advance!
Issue:Cables or wires do not show up in Shrink wrapsIssue description:• When creating skeleton models and shrink wraps from assemblies, the cables are not being created in the shrink wraps. These need to show in the Shrink wraps so that MFG can see reference connections.Steps to reproduce issue:• PTC to try creating a shrink wrap of an assembly that has cables.Expected result:We expect that if a shrink wrap can be created with harnesses and they show up that the cables should show up as well. It is beneficial that users get all of their model entities in the shrink wraps to convey to MFG what is needed and going on. PTC CASE - 15641560
Issue:Cannot place a dimension off of a specific feature in the sheet metal part.Issue description:• Unable to select reference for dimension from sheetmetal model edge due to the presence of the Mirror feature.• Dependent mirror command locks the current dimension scheme.• If we suppress the mirror feature, still we cannot modify the dimension scheme on the original shape.Steps to reproduce issue:• Create a flat wall in sheetmetal (Flat1) -> Create a Mirror of Flat1• Edit definition (Flat1) -> Shape -> Sketch -> Unable to add dimension to references a different flangeExpected result:Can able to add a dimension on the original shape, so it references a different flange than was originally selected and it is directly reflected in the mirrored wall.The mirror should reference the parent feature but it should not control/ lock the parent feature to add a dimension.Reference data:• Cannot_place_dimension.mp4• frame_top_front.prt PTC CASE - 15852370
perf parts in creo are taking to long to regenerate. there also needs to be an enhancement request turned in to PTC to allow a stagger pattern with different x & y values. PTC CASE NO. - 15288411
Expand Model Copy geometry placement constraints with Mate, align, insert etc Instead of coord.system only. This enhances placement for assembling copy geometry features of complete parts, also when coord.systems are not on the right position for example in released or legacy parts.
Give the user the ability to retain the units while performing a "Save As"". In Creo Parametric with a collaboration extension, the "save as" command will change the units to metric regardless of the original models units. For example : I have an inch based part file in Creo and perform a "Save As" to a SolidWorks part file. When you open the part file in SolidWorks, the part is metric. The user has no control over this behavior.
Could create a new API for ProSurfaceSideAppearancepropsSet() let it is able to input an array of ProModelitem. Because we have a model include 90k+ surfaces to apply color if we can input an array to instead of for loop we think the efficiency will speed up.
Flat-to Screen PMI text Height does not get converted when model is converted from one unit to other unit, where as similar conversion happens for Normal PMI text height. Also there should be a toolkit API to read it.
In creo , we unable to take datum feature from parametrically prepared 3D model to 2D drawing.Or we are unable to select planes/ Centerlines As datum feature in drawing mode. will anyone help how could we annotate a plane / centerline as a datum in drawing?I tried multiple times to create datum on plane / centerlines. But its not possibly done.Rather than that on surfaces its creating datums which is not good (because surfaces having drafts/tooling operations) As Creo is parametric software it should have this kind of flexibility to generate datums on mid plane/ planes/ centerlines to annotate the drawing with minimal dimensions
The values in these parameters are difficult to access and edit in existing models. If they were added to the detail options of a part that would make changes/updates as simple as importing a new .dtl to a model. Current method to update all manual method in spoiler: Spoiler (Highlight to read)Add a note and input the parameters:&linear_tol_0_&linear_tol_0_0...&linear_tol_0_000000&angular_tol_0_&angular_tol_0_0...&angular_tol_0_000000With the note made now double click on each to bring up the edit value dialog. Input new value, enter, repeat for all 14. Then select the note and delete it.Add a note and input the parameters:&linear_tol_0_&linear_tol_0_0...&linear_tol_0_000000&angular_tol_0_&angular_tol_0_0...&angular_tol_0_000000With the note made now double click on each to bring up the edit value dialog. Input new value, enter, repeat for all 14. Then select the note and delete it.linear_tol_0_linear_tol_0_0linear_t
The embedded Chromium browser is not very configurable. A good thing will be, that it is possible to add Chrome Plugins to the embedded Chromium Browser to make the webbrowser much more flexible.
Under Mirror Component there needs to be a default ON option for "perform symmetry analysis". This should be a Config.pro option that can be put in the system wide Conffig file. See: https://www.ptc.com/en/support/article/CS306403
Like Connection, motors, dumper, springs... parameter (see pictures) it could be very nice to get access to Cams, 3D Contact, Gears & Belt parameters in Relations, so With BMX we can perform global variation even on cam friction, restitution....
Can extrude feature have draft/taper on both direction with equal taper or unequal taper as an option ?
Currently if we have model with cuts that leaves islands of material Flat pattern preview wont work. Workaround is to make unbend manually, suppress it and and "flat" instance in family table with it turned on. Nice enhancement would be to have some kind of control that would enable Flat pattern preview to overcome this problem. Problem: Workaround:
In order to analyse whether all surfaces of a MBD model are properly dimensioned and or toleranced an off-color display would be helpful. Possible solution: Temporarily off-color displaystyle for dimension and tolerance. - Blue: Surface has not been referenced by dimension. - Yellow: Surface has dimension or tolerance (some are missing) - Green: Surface is toleranced and dimensioned - Red: Surface is overdetermined
So far we have capabilities to read the Overlay Views from the drawing like using, - ProDrawingOverlayviewGet() | GetSheetBackgroundView() - ProDrawingViewIsOverlay() | GetIsBackground() But we don't have any option to create a view of Overlay from another drawing. I think it will be very helpful for the industries to have such an option to be a part of automation. Please provide us such APIs to make our life easier. If the same feature is available already in any of the Creo-developed API, please let us know too. Thank you in advance!
It would be useful to be able to display Sections and Zones during an animation of an assembly. At the moment, both Sections and Zones are deactivated/removed from the View Manager when inside the Animation application.
PTC should think about a popup which appears every tine the calculation time for a new feature exceeds a fixed time value. This popup should contain two buttons, one for waiting till the new feature calculation finishs and one for aborting the last step. This shall reduce the crashes of Creo.
Surfaces/edges/vertices etc. needs to defined in ‘Reference Tag’ at Configure Module assembly level to be used at Configurable Product level. This should behave like a normal assembly. It seems like a lot of time to set up "Reference Tag" on all the items you want to be able to reference when placing components, creating sketches, sketcher references, etc. Specially when you have a master assembly, you have to go in and "Reference Tag" every item to use. Just seems like a lot of time to be spent creating all the Reference Tags when it could behave like a normal assembly and not have to set those all up.
Ability to attach a imported image in a drawing to a drawing view. When you move the view the image moves with the view.
Hello, If you have created surface symbols or geometric tolerances in an annotation key (component) and incorporate it into an assembly, these symbols are displayed directly in an assembly drawing, even though the symbols are not relevant to the assembly. You then have to hide the symbols individually each time. All information from the annotation key should be hidden by default (component and assembly drawings) and can only be displayed on request (like dimensions). How information from the annotation key is handled should be adjustable in config.pro.(Case 16118930) Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Hallo,wenn man Oberflächensymbole oder Geomertische Tolernazen in einem Anmerkungs-Ke (Bauteil) erstellt hat und dieses in eine Baugruppe einbaut, werden diese Symbole in einen Baugruppenzeichnung direkt angezeigt, obwohl die Symbole nicht Baugruppen
-With the annotation feature, it would be easier to remove directly an annotation with the delete button for example. Instead of editing the annotation feature.
Unable to window select an area in a pattern to suppress or unsuppress instance. Currently we have to individually select each pattern instance to suppress and have to omit the instances manually one by one.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.