Recently active
One of our prospect would like to view the models created by Creo in steroscopic view.
When moving around within the model tree, only the mouse can be used to select a model tree entry. The up/down arrow cursor keys move a dotted box around the model tree, but the selected item remains what the user last clicked on. (WF4)I frequently find myself in an assembly, clicking one sub-assembly after another until the one I am interested in is highlighted in the model.At present, it goes:look at the model tree;click the mouse on the next sub-assembly;look at the model to see whether the item of interest has highlighted; back to the model tree; click the next one; back to the model to see if I have hit the target;etc.Idea:Allow the user to move the selection within the model tree using either the mouse click or the up/down arrows.In this scenario, I simply look at the model and press the down arrow repeatedly until the item of interest turns red.Much quicker and more efficient.Please vote on this idea if you agree with me.Thanks,John
If you created in annotation 18.01 an cutaway view by using a spline and instead right click - accept accidentally click the middle mouse button, it is very difficult to accept with right click or indicate the depth, because the context menu accept is missing.Variant 1 (preferred): If you press the middle mouse button when the edge is not locked, then the border to be completed easily ("accept edge" implicit)Variant 2: A question comes: Outbreak edge not finished, accept edge?Yes: Go on with the next 3D windowNo: You could click on other points Video Link : 3744 Video Link : 3746
In Annotation 18.1 the command buttons: OK, Cancel, UI will show only shown in modeling windows appear even though it is pure annotation commands. In the annotation window and the additional 3D window buttons do not appear.If e.g. be accessed from the Mini toolbar commands with a hidden user interface, it is in the annotation window only by using the space bar and click on the button user interface, to display the user interface.This is inconsistent from the operator and performs especially for new or inexperienced users always confusing.See the screenshot. Here in Modeling 2 Display windows were opened, in this case in Annotation a 3D window is displayed permanently, using "side by side" also order visible --> Buttons are only available in windows that do not belong to annotation.
Idea: Enable more types of items to be shown from the Model Tree.For example, currently (WF2, WF4), I can right-click a feature (or a part in a GA) and 'Show Dimensions by View'.This is a quick and efficient way to ensure that I have enough dimensions on my drawing to define the part: If I show the dimensions Pro/E uses to define the part, I should have enough to dfeine how to make it.It beats showing all the dimensions and trying to sift out the wheat from the chaff.However, why can I not 'Show Axes by View'? Or 'Show Gtol Datums by View'. Or anything else you can think of. It was axes that got me thinking, but the logic applies to anything. It seems less of a blunt instrument to me than does the Show/Erase dialogue.Please vote. You know it makes sense. You know what? Vote anyway, even if you think it doesn't.John
Currently there is one workspace in Modeling, often this is not a problem - we are able to have multiple sets of data in one workspace and still logically separate them. Often though, things just get too messy: too many workplanes, too many random parts not yet part of a particular assy set, sets that are just completely unrelated making Save All At Top packages unwieldy, and auto-saves unnecessarily large. Perhaps the solution is to allow multiple instances to be opened at once, but that may be tricky with multiple ModelManager instances. Perhaps the solution is tabbed environments in Modeling, with a way to move parts assys between tabs, and the ability to choose a tab to load to from MM. This would also be great for Annotation, so you can be working on a drawing, and load another drawing for reference, or for helping someone with a question about another drawing so you don't have to save-load-look-reload-resume work. Drafting already has the ability to open mult
I have a part used in an assembly. I would like to included a BOM balloon on the part page that is driven by the BOM balloon on the assembly page. Currently I insert a Balloon note.
I have included an image of a GTol callout.
While it is easy to display an exploded view, and edit an exploded view just from the view ribbon, it is still expected to go into the View Manager to save the exploded view. Please make this save automatically, or add a command that can be typed in the search command, similar to Save Status for the Layer Tree.
When storing a drg from Annotation, user would like the current drg (if loaded from file system and not new) to be populated in the "Save" dialogue window Currently when Save is selected, user has to identify the drg they wish to overwrite. Issue is that user has many drgs all of similar Drg numbers, and can often overwrite the wrong drg without realising. Every time user selects save, he has to identify the correct file that he wishes to overwrite. By automatically identifying the drg that had been loaded, the user can easily carry out a Save and prevent the unintentional overwriting of other files. Alternative is that a Save As is incorporated into the product, as per current Windows application useage. Therefore a Save would automatically overwrite the current document and a Save As would create a new doc or Overwrite another document on.
I created a roughing toolpath with “follow contour” option, tool was lifting to the safe Z even when tool was outside the stock; this resulted in wasting lot of time by moving tool in fresh air at cut feed.It would be very useful and efficient to have “connection_type” setting with “simultaneous” (same as in trajectory toolpaths) option to stop tool from retracting.
Instead of selecting the entity several times, it will be very helpfull if the program were able to memorise the last selection.When I create a mapkey that allow to do 9 Points with a ratio of 1/10% by selecting an edge, I have to select the same entity 9 times.
As it is possible to place an assembly within another assembly, it should also be possible to place a workplane set within another workplane set.
When measuring the distance between cylinders, It checked in "use central axis" by the default.It is made to want the default of OFF to be possible in a config.
When importing a PCB from an IDF file, hundreds and even thousands of subparts of electronic components are created. In our use case the electronic engineers design and manage the PCB in their own electrical E-CAD software. After import into CED the PCB-assy is only used for space-claim, mounting and harness-routing. This means that it does not make sense to store each individual subpart into ModelManager.I propose to add an option to remove the read-only-flag of the top-level assy and make it inseparable automatically (like the option in Cabling) so that the PCB can be stored as a single object.
The current PCB interface does not support the common customizing concept of SDCORPCUSTOMIZEDIR, SDSITECUSTOMIZEDIR and SDUSERCUSTOMIZEDIR. Instead a customization file needs to be present in the current-folder when launching the module. I think the latter is not a practical solution. It should not be too hard to incorporate the common customization concept into the code. I believe the PCB module deserves this, after all these years that the module exists!
In a [Move 3D]command, I want to use [Start Multiple Positioning] function like [Copy part/assy] command.
Right now, the dimension and crossection arrow length and widths are controlled with the detail options draw_arrow_width, draw_arrow_length, crossec_arrow_length, crossec_arrow_width. But this forces these sizes to all be exactly the same on each and every sheet or even drawing view. We often make multi-sheet drawings with different models detailed on different sheets. These could be family table parts or even independent parts. But the sizes of these parts may vary quite a bit such that we need to use different size sheets and thus different size dimension text and arrow sizes. It is possible to independently vary the dimension text sizes but the arrow sizes are controlled globally from the detail options as per above. I would like to be able to control these sizes on a per view basis. Even on a per sheet basis would give me more than what we have today.
Direct selection in single surfaces is blocked. We can not select single surface without its feature consideration. We need to use Exclude Loops to solve situation. Practically when I select surface for draft Creo takes all surfaces done with that features. (Example - Quilt Solidify). That's very bad!!!!!
A majority of my tapped holes do not require a chamfer. The tapped hole values in modeling are defined in the "mach_adv_library-tappedholes-thread_dia-table" - if i set the chamfer rad to be the same as the Tap Rad, it seems that the Chamfer details in the Menu (default of 120 degrees) default over the settings in the Table.My Enhancement\Product Idea is that i would like to be able to set a zero chamfer default for Tapped holes created from Machine Module Feature.
A command should be added to the right-click menu in the structure browser to center and auto-fit the viewport on a selected part or assembly. This will make locating specific items in the viewport much quicker. Currently I will turn the part on and off by checking and unchecking until I can find it. A command that does this will be very convenient.
When ProductView gets installed, it is not assigned in Windows to be the Default program to open a .pvz file. This can prevent you to open a .pvz file stored as Original at a Document Info Record in SAP.So need to Change the entry from "open with" to "open" for future releases of Product view
we have many articles in two versions. One with a "straight" thread and one with a tapered. For the rest of the model is the same, we put the two variants into a family table. Here I wish, I could vary the thread by just change a single value (e.g. parameter, dimension) but not to supress the whole cosmetic feature
I often wished to "sort" notices on drawings by putting them into a drawing table. Here it would be useful to be able to blank out the outer lines of a table too.
It could be useful to be able to change a tolerance table within the family table along with the dimension
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.