Recently active
In preparing for labels for plants normally the "text on profile" function is used, and this is then milled in either the plate or embossed on the surface.Due to the lack of preview in the "text on profile" because the text can not be changed afterwards, would be two alternatives here.Option 1: Create 3D text and place it on the surface of the shieldAdvantage: easy creation and changeabilityDisadvantage: No way to derive 2DOption 2: document level put on the billboard and create 3D text in this document levelAdvantage: Easy changeability, 2D derivation possibleDisadvantage: creating something more complex, document level must be checked separately in the tree list, so the text is visible on the 3D model- Possibility to store the visibility of the document level in the owners (the default setting as for 3D object requirements - coordinate system)?- Ability to project 3D texts on work planes to then impart to the surface in 2D + derive?If for example it is a way to create 3D text from a
Bei der Erstellung von Beschriftungsschildern für Anlagen wird normalerweise die Funktion "Text auf Profil" verwendet und dieses wird danach entweder in das Schild gefräst oder auf die Fläche aufgeprägt.Aufgrund der fehlenden Vorschau bei der Funktion "Text auf Profil" und weil der Text danach nicht mehr geändert werden kann, wäre hier zwei Alternativen.Variante 1: 3D-Text erstellen und auf die Fläche des Schildes legen Vorteil: einfache Erstellung und Änderbarkeit Nachteil: Keine Möglichkeit, in 2D abzuleiten Variante 2: Dokuebene auf Fläche des Schildes legen und 3D-Text auf diese Dokuebene legen Vorteil: Einfache Änderbarkeit, 2D-Ableitung möglich Nachteil: Erstellung etwas aufwändiger, Dokuebene muss extra in der Strukturliste angehakt werden, damit der Text am 3D-Modell sichtbar ist- Möglichkeit, die Sichtbarkeit der Dokuebene im Besitzer zu speichern (Vorgabeeinstellung wie bei 3D-Objektvorgaben - Koordinatensystem)?- Möglichkeit, 3D-Texte auf Arbeitsebenen zu projizieren um dies
I just verified with PTC support that there is no version of the media for Creo 2 that does not contain 32bit binaries nor is there a documented procedure for removing them. We have chosen to take PTC’s recommendation and no longer deploy 32bit Pro-E (now Creo 2) so we do not require them to be included. The size of the installation media is hindering our ability to efficiently deploy the software to our large user base that is located across the world. We have no preference on if the media would be provided separately or just the documentation/process to remove the 32bit media.
Currently in Creo 2.0 there is no method to disable auto check in. At out company, we have found that the auto check in can be problematic since the user does not get a chance to review what is being checked into Windchill. Also, there is no comment box to document what has changed. We would like to have the ability to either disable auto check in or change the default behavior to use the custom check in.In the meantime, we are adding the custom check in button to the Quick Access Toolbar and recommending that our users use it to check in objects.
When applying properties to an item using the Dataset Selector, the columns width often needs to be set to get clear visibillity of the properties set.The columns can be widened, but this does not get stored as the next time you want to apply a dataset, the columns are reset and you have to change the widths manually again.It would be convenient if there was a configuration setting of some sort that will allow the width to be set permanently, thus eliminating time spent on setting column widths to get clear visibility.
By default the Change Radius command is the first command in the mini toolbar when you select a single cylinder face. Automatically the copilot becomes visible and you can change the radius by dragging this arrow, without the need to first activate the command.Since version 18.1 the possibility exists to modify the content of the command mini toolbars. If you change the Single Cylinder face MT and put the change diameter command on the first place, then you don't get the copilot automatically and you need to activate the command first before the copilot appears.Both the commands are pretty similar so I hope this behavior will be unified.
It would be convenient if we have the choice to let represent the view of angular dimensions with or without extension to the intersection point. Similar to diameter with or without centerline. The intersection should also be able to be dimensioned.
In Classic NC turning steps, we used a lot the local allowance definition In the new NC turning steps, this is no possibleBecause of this, we still need to use te "old" NC Classic turning stepIt would be great to have this fucntionnalitie in the new turning steps
There is currently no API access to interrogate or modify the state of the 'default' check box for tolerance decimal places. In our toolkit application, we need to ensure that the number of tolerance decimal places matches the number of nominal value decimal places.
I want to describe the arc dimensions as shown in this figure.
In shaded view, inactive components should have simple transparency and not a stippled transparency. This would make things much easier to view.Usually when I activate a component in an assembly, I turn to wire view because shaded view is hard to use.
I would like to see different thickness's allowed in a sheetmetal part. This would allow easier modeling of rigid flex circuit cards. Yes there are work arounds, but they are cumbersome. Unigraphics NX software does allow this functionality, which is why I feel this is a valid request and should be considered.
Would like to temporarily look at object(s) in another Workspace without having to clear session of currently Active Workspace.Objects access would be read-only while viewing. When done viewing, switch back to Active Workspace and continue working.
There is nothing more frustrating in trying to help new academic version user when full version owners cannot view their files.Is there a business case for not allowing academic versions to be viewed by the full version? Make the files read-only and do not allow export or even printing.I request this in the spirit of collaboration.
Stock/Finish parts are not supported in Creo Elements / Direct.Saving there is the warning:and relationships are lost in windchill.
There is no Bold option for a Text / Notes that was given in an Creo Parametric Drawing.We've to select an existing Font with Bold Option.Some of the Fonts is not having Bold option, then it's difficult to apply the Bold Properties.Regards,Niranjan V
Is it possible to have a config options that allows for disabling the prompt for Combined Views when creating new views in a drawing.Am aware that there is a check box the first time round, but this only for the running session.Am looking for a more permanent solution to this in the form of a config file.
Now, view can fit another view by property.However, it will be alignment of only one way. For the reason, movement of view will generate a gap within another view.I desire a view group in a Creo drawing. If grouping view is possible, a view can move without a gap together.
Give offset curves to option to trim the surface in the offset curve feature.Also, allow extending the offset curves in the same feature to assist in cases where the curve does not quite reach the surface edge.
At present it is only possible to configure Annotation to show the thread size for a certain type of threaded hole. For example, in our configuration the thread size is always shown for the type "metric fine", and is never shown for the type "metric".However, if a threaded hole of type "metric" is changed in Machining to have a non-standard thread size then this is not shown in Annotation.It should be made possible to configure Annotation such that only a non-standard thread size is shown in the dimension of a threaded hole. A threaded hole with a standard thread size should be shown without the thread size.
It should be able, to create centerlines in square and rectangle cutouts with only one click by 2D box.Select cutout by 2D box and the center lines will be created, just like slot. It would be helpful when you need to add the cutout center point dimension.Now you’ve to create one horizontal and one vertical center line.
Hello,I have a small enhancement request to make regarding Creo Elements Direct Modelling which deals with the quality of an engineering drawing. This particular issue is to do with cross sectioning and keeping the part colour when making the cross section from a view of a drawing. For instance when I create a cross sectional view from a drawing it automatically comes up with the section shaded in all the same block colour as shown. There is no option to bring it to the original shading. However for presentation purposes I would like to be able to create a section view with the colour of the parts. As shown. In order to produce a section as such - I would have to go through a long winded path of creating a section of the model, hiding half of the features and creating a config. I can then create a view in the drawing bring the config in and manually hatch the faces. All this is unnecessary if you just want your drawings to be more aesthetically pleasing and easier to read.It would be a
Constraint reaction measures in any csys and graphical representation reactions (resultants & components) Constraint reactions are currently only calculated for constraints defined in the WCS.
For current functionality, the part library standard type is controlled by user interface language by force. To use JIS part library, we have to switch user interface to Japanese.Please add ability to switch part library standard type in part library menu.
Example: there is only one license for XVL-generation.If this license is checked-out by a user mistakenly the rest of the company cannot use the XVL feature.The idea is to mark such licenses as 'not for check-out'.Until now there are only marks like 'only for user X' or 'only for machine Y' available.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.