Recently active
It is possible today in Creo to create multiple OTHER_OUTLINE regions for the same ECAD_PART_NAME, and then, generate an IDF file. However, when IDF data is imported, only one of the multiple OTHER_OUTLINE regions for the same ECAD_PART_NAME can be imported. All of the OTHER_OUTLINE regions for the same ECAD_PART_NAME should be imported.# On the ECAD side, same OTHER_OUTLINE region names are treated as the same electrical attributes, and placed on the same layer, and therefore, the same electrical attributes need to have the same name.-----Too many restrictions in defining OTHER_OUTLINE (e.g. Duplicate ECAD_PART_NAME s are unsupported.)
Internal edge of the surface flattened with Flat Quilt is not created. (Internal edges can be viewed if this is sheetmetal)
In Pro/E, flatten Quilt is usedNot acceptable for engineers to create fillet for all bent areas. Quilt surfaces need to be unfolded when the model is unfolded.
An explode state created in an assembly can be applied to an explode state in a higher level assembly that contains it.For example, my top level assembly A contains subassembly B. I have an explode state created in subassembly B. I want to create an explode state in the top-level assembly A, and rather than translating and rotating the components in B again, I would like to apply B's explode state when defining the explode state in A.Currently only the default explode state propagates to higher level assemblies.
I currently cannot place a 3D annotation GTol on a threaded hole note. Please add note to the placement type options.
RMB on Graphic Window or Model Tree should show Edit Definition, Edit, Dynamic Editing, Edit Reference first.
Ability to replace 3D data from 2D drawing. Should be an officially supported command.
Display feature numbers in the model tree for all features, even if they are below the insertion point or suppressed. This will help greatly when reinserting the arrow at a specific spot if that feature number is known. No reason to hide the feature number for suppressed features.
Ability to do the following, for example:- Clearly understand undercut locations- Clearly understand 0 and small draft angle areas, including color-code areas by angle (e.g. BLUE for 3 degrees and above, GREEN for more than 0 degree but less than 3 degrees, YELLOW for 0 degree, and RED for less than 0 degree) Need multiple colors, not shades of colors.- Define thresholds- Share definitions/settings with other users.
Ability to automatically define 3 planes for each added coordinate system. The planes should be grouped together by default and expanded on the tree as necessary
Ability to specify the width of edge curves in sketch. Difficult today to distinguish edges from dimension lines.
Ability to see if there is a degree of freedom for sketch element.(Color-coded, high-lighted, etc.)
No possible today to align spline with straight curve in sketch. This is also not possible when segment is deleted. Spline side is trimmed when Corner Trim is performed, but the result should be T-shaped.
Ability to offset and parametrically control spline elements in sketch
Selection cannot be made from the tree since the tree is hidden behind the dashboard. Particularly challenging when components are placed on assembly. Difficult to see XYZ planes. Dashboard moved somewhat to the right at Creo 1.0, but needs to be placed in a better location.
Line thicknesses and colors should be identical to what you see on the screen. Plotter output state should be identical to the drawing state on the screen. Background color modification is possible, and not acceptable since it impacts plotter output pen number.
Ability to show/hide elements while executing command. When creating a new sketch, other parts can be showed/hidden from the tree, but this is not possible when sketch is redefined.
3D volumes selected in ECAD keep-in/out regions should be displayed in a specific color with translucency.Also, when defining hatching in ECAD region, a specific color should be applied to each region type (BROWN for keep-outs and LIGHT BLUE for keep-ins, for example), and not all the regions should be in YELLOW.Very difficult to distingish region types today unless you see the tree.
Want to have the following capabilities in interference checking:1) Select 1 part against other parts2) View only parts that are interfering, making it easier for the user to find interfering locations.
When multiple UDFs are placed, the names of the features placed 2nd and onwards become default names, making it very difficult for the user to find the element(s). The feature names should be the combination of the feature name and a numerical value (1, 2, 3...).
Feature suppression cannot be controlled without programming.No ability to switch features when an UDF is created.Want the ability to suppress features from Relation.
Ability to select a plane as a boundary limit when draft is created
Ability to specify curve for draft hinge
Ability to select split options for draft hinge curves
Ability to define a region and attributes for each sketch of a component for OTHER_OUTLINE regions, just like keep-in/out regions.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.