Recently active
Until creo 2.0, support only up to IDF 3, which cannot including copper tracings information. Please update support the latest IDF 4 including copper tracings
Our customer works in very large assembleys. In order to open these they have created a simp rep that opens the model without any geomtry loaded. When a model is opened with this simprep Creo only add the top assembly to it´s internal memory. However when performing a search for parameter values Creo adds models to the internal memory causing a crash and exit. The search is performed from Tools>FindLook for: Solid model/Solid model Look in: top assembly Rules: Expression Options: Not retrivedIt would be nice to be able to search in the submodels without adding them to the internal memory if possible?
In Pro/Engineer and Creo Toolkit we can do graphic display with ProDisplist3dCreate(), ProDisplist3dDisplay() and ProDisplist3dDelete(). The problem is those 3d list will be always visible even if they're behind some 3d solid. We really need a functionality to automatically hide the part of those list behind 3d solid and only display the part of those visible.
Pour pouvoir faire des études Aérodynamique, nous souhaiterions pouvoir "boucher" les jeux entre différentes pièces. Pour cela, nous souhaiterions pouvoir ajuster/étendre les faces externes d'un composant à un autre composant voisin.
When the external reference point of a coord dimension gets lost due to a change on the model, the whole dimension gets invalid.Ability to change set the external reference point to a valid element would save much time.
For current functionality, user cannot select two half cylinder from two component to measure when measure Cylinder in CMM since it ONLY allow to choose ONE surface, CANNOT select two or more surfaces.
In cmm, it is very easy to define a system with three plan.so how to define the coordinate with A part just have two hole and plane ?
Currently Creo Simulate/Mechanica will not allow you to create additional or control current assembly level cross sections while in Simulate/Mechanica. This causes you to have to jump in and out of Simulate/Mechanica mode in order to turn on/off existing assembly cross sections or to create additional cross sections.The need arrives when dealing with large assemblies where there are buried parts/components in the assembly that are not easily visible. Having access to creating or turning on existing cross sections in the assembly allows you to easily apply contact, free, bond and other constraints between surfaces of buried components.
In Microsoft Office applications, if I make a selection, for example, if I change the font size of a word, I can select another word and press F4 and it will repeat the font size setting for the new word, et cetra ad nauseam.In WF4, CP2 or whatever, I sometimes want to do the samething rpeatedly, but I have to click the same sequence of selections each time. For example, I might want to change the balloon type of several BOM balloons from with quantity to without quantity, or I might want to make a number of dimensions basic.If I were able to select the next candidate balloon or dimension and press F4, it would save quite a lot of mouse clicks over the course of a day.The ribbon UI seems to be an attempt to mimic the Microsoft Office UI, so let's take it a bit further and mimic some of the good bits as well.I apologise if this is already implemented in Creo 2.0.We're way behind the times in Somerset! WF4/Ilink 3.4.Please vote up, even if you only think it is not a bad idea.John
When copy command is applied to an assemblies that contain some stock/finish relations all this relations are loosed on the copied assembly.In the actual release there is no way to maintain the stock/finish relations (see case 11717210)The customers ask for an option on the copy command that if selected can include the stock/finish relation in the copy operation.Best RegardsDott Franco Mazzucchelli
In sketcher, it is often the case that one would like 2 or more dimensions to have the same value. For example, when sketching what should be a set of lines offset from another set of lines, but you can't do that in sketcher. Then you end up making dimensions equal to fake the offset. One way to make dimensions equal is to write sketcher relations. I don't like to do this, because there is no obvious pointer to the poor soul who comes to modify things at a later date that he or she should look for these relations.Another way is to insert lines joining the offset lines and apply an 'equal length' constraint to these lines, before making them construction lines. This works and gives a visual clue of what has been done, but it is simply too many hoops to jump through for what is such a simple thing.It seems to me that there is a case for a new constraint type in the pop-up box that sets an 'equal' constraint, but is applied to 2 dimensions, not to 2 sketched entities.I can't think of any
Unable to place tangential dimension to arcs in horizontal direction when for one of the arcs there is no tangent available in vertical direction. If extension lines would exist then a solution could be found.
Parts which are converted as Quilts (surface parts) are not visible when selecting the topassembly. They must be selected seperately to show them in a viewport. This seemed to be 'As designed' behaviour. However this is very confusing because you cannot see the parts when importing the assembly from Step or opening the assembly from Model Manager (same behaviour when deselecting the top assembly!).Better behaviour would be to turn on visibility for all objects within a structure; because of the different color it's obvious which parts are solid and which parts are surface parts.
Pro/BATCH has an extensive library of toolkit tasks that provide valuable functionality. Being able to call Pro/BATCH from PDMLink would provide a convienent means of generating visualization (PDF, IGES, STEP, VRML, ...), running modelcheck, etc on models in PDMLink and workflows.Currently dbatchc is an executable program that uses a proprietary means of encrypting Windchill credentials in the toolkit task that it passes to dbatchs. The encryption methodology is not available to include in a custom Distributed Services client. Implementing one of the following approaches is needed:Java library to call Pro/BATCH against an EPMDocument and specified Toolkit Task Definition.OOTB Tookit Task to open an object in PDMLink based upon user arguements.
The single line note editor UI for drawings needs an option to open an editor rather than just the single line-at-a-time entry field.Perhaps consider incorporating the model annotation note dialog in the drawing's annotation note UI. Maybe this is already under consideration for Creo 3.0?
Moving general view moves its projection views also. Moving projections dont affect position of general view.Currently this works but only in 1 direction (horizontal projections follow general view in vertical movement only and vertical projections in horizontal movement only).Moving general view with its coresponding projections is waste of time. Each view must be moved separatly(unless in one direction allowed).
Allow the user to multi-select more than one model when using the Del Model functionality within a Drawing. Currently users have to delete each unused model one at a time. It can be very tedious. Removing unused models can improve large drawing performance, so I'd like to make it as easy as possible.
with version 2000i arrows can be added to the broken view, but with 2001 and upper the message log says "Offset x-section arrows may not be shown on broken views".It is very important for severals customer to display offset x-section arrows in this way, and that sketching them as a workaround is not acceptable.related to the SPR 997666 R&D states that the methodology employed in earlier releases 2000i did not work, in a rather serious way, and it was decided that it was better to disallow them than to show incorrect information to the user. And this functionality cannot be safely developed outside of a scheduled project in a development release, please schedul a new project in order to impliment this functionality
at today you have Part Library which can make connections and place them in a patterns using those #!?/#$% user defined features. once the pattern is placed it is terrible to make changes to it. On the other hand there is the basic pattern command which can be used for positioning features and parts and it is easy to modify the pattern afterward, but it does not create connections.both of them are great to work with individualy, but they do not work together. Strange if you think that patterns are available for a while now in modeling.
It is currently not possible in the fluent user interface to change the properties of a note text line after it has been created.Example: change the appearance of the arrow. You can do this by using the command CHANGE_LEADER_ARROW_SIZE in the command line.It is possible to set the properties used to create a note text line and then to create one with these properties, but it should be made possible (via right mouse button properties) to be able to change the properties of a note text line after it has been created.
IDEA:I would like an option for removing all failed surfaces from selection in one click. Why isn't there a "Remove all failed surfaces"?With current UI I have to rightclick and select "Remove" on ALL failed surfaces in selection.
Annotation: Wird der Bemassungstext eingeklammert, wird eine eckige Klammer erstellt. Die Farbe der Klammer ist wie die Bemassungslinie.Gemäss ISO 129-1 sollten die Klammern rund sein und die Farbe sollte wie der Bemassungstext sein. (grün) heute: [40] falsch sollte sein: (40)Bitte dies konfigurierbar machen. Danke im voraus.Urs Ammann
Now we have Layer Tree and History Tree. I propose Entity Tree. It is useful if you work without history.
As of Creo Parametric 2, when a user highlights a failed component in the regeneration window, it does not highlight it in the Model Tree.PTC, please enable:Highlighting of the component in the graphics window and in the model tree when selected in the regeneration window.Also, it would be great to just be able to rmb-select and edit definition from the regeneration window.
There is a symbol missing in Gtol symbols of Creo. We need to be able to add the symbol "><" next to the reference. See the image below. This is an extract from the norm ISO 5459.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.