Recently active
Add the ability to search a family table for a specified feature id number. For large family tables it can be difficult to find the column for a particular feature since the columns are not always arranged in ascending order based upon the feature id number.
Wie wäre es mit Pro/ENGINEER?
When editing surfaces in Creo's Style tool, one can have a ghost surface and/or reference geometry. The ghost image only provides a qualitative reference, and reference surfaces can be used with cross-sections, intersect or drop curves, but no options give quantitative information of surface deviation for the entire surface, ideally displayed as a color map on the editable surface similar to curvature analysis display.Right now, the closest I can get to this functionality involves using arrays of point references, which is less than ideal. Surfaces are often exported to software with this comparison functionality, and iteratively corrected in Creo until the desired tolerances and quality are met. This is an enormous drain on time for accurate surfacing workflows.
Any type of surfaces should go in "def_layer" LAYER_SURFACE.Today, round and thicken features' surfaces are not collected in "def_layer" LAYER_SURFACE.
In Creo Parametric 2, the grab points for dimension leaders, extension lines, and elbows were removed.This requires the user to right click and select flip text to move the shoulder position. If one wants to remove the shoulder, the user has to set the detail option, in each drawing, default_dim_elbows to "no" and then go into properties and select a different display style for every dimension. Unfortunately, this also breaks the diameter dimensions and the user must manually set all of those as well. So, what we used to do before in one click takes at least 2 and up to 10 in Creo P2. </sarcasm> Wow, what a great enhancement to productivity! </sarcasm>PTC tech support says that this is the way it is supposed to work and will not acknowledge that this is a bug. >_<PTC, please bring back the grab points on dimensions so we can get back to the productivity we had in pre Creo products.
Hello, I wish to open several plans at one time, rather than to make: open, plans, select, ok ! 15 000 timesTo put them all in memoryTo couple with another idea: open more than 15 windowsoranother idea: just put them in memory without having them in windows opened
Bonjour, Pour développer la FAO avec Creo, dans l'enseignement technique, je souhaiterai récupérer les postpro des machines du lycée. Quelques exemples: T400 , TCN 3 axes , num 1060T Emco Turn 242 , 2 axes , num 720 C300V , num 1060 C400V , num 1060 Merci pour votre précieuse collaboration, Thierry PORTMANN Lycée COUFFIGNAL STRASBOURG
For example you have a solid model and you give some dimensions on solid model surface at drawing with dimension tool. Then you offset one surface so your used edge disappear correctly but dimension does not change or give an warning. But if you move this surface with flexible modeling, dimension is changed. Customers think dimensions must be changed with offset feature too.Video link = https://www.opendrive.com/files?OF8yMzQ3OTY5MF9IeVFlaQ
Please enable the Reference Designator input even if the UNIT of MEASURE is not “EACH only” in PDMlink.See also SPR 1945804.
Optional Mini Toolbars are a great addition to Drafting. I would like to raise an ENHANCEMENT for these to be editable Toolbars as per Modeling.
For current functionality, inablity to save customized spin center with model, which is very inconvenient for us.https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS54062
The solution will be useful for Pro/Piping automatic bolt/nut insertion. Currently callout is not created for the information components, because they do not contain any geometry. The idea is to automaticaly create a callout, tied to parents (components that are used for parametric amount) information component. Such a possibility would save a lot of time on the design drawing.
In Annotation a coordinate dimension with tolerances should not place these tolerances on the zero dimension. The tolerances should only appear on all the other dimensions.
If you define constraint in the WCS, you can define the reaction measure.But if you define constraint in the cylindrical coordinate system, displays the following message."Reaction measures are computed for constraints relative to the WCS. Please select a different constraint. "Please add ability to show "constraint force" in cylindrical coordinate system.
Hello thereall MODIFY commands can use the SELECT functions.The STRETCH commands can not use these functionsYou can only click on or drag a simple rectangular frame to choose elements.Would you please improve this
this would be such an improvement if you could select multiple parts to project them onto a workplane. now you have to restart the command again after each time you have executed the command.i would already be very happy with just a next button
The enhancement request / Product Idea would allow you to run a full motion analysis and report in the parts where on the part(s) the clearance is less than the amount specified in the analysis by highlighting the surfaces in yellow based on a distance you specify. This would allow you to open the parts or assemblies and see what material needs to be removed from the parts. As you can see the yellow highlighted surfaces in the last slide of the powerpoint file need to be cut back to maintain an minimum 65mm clearance from the tire to the body panels. This would combine the current existing tools into a new tool. Mechanism Motion Analysis would be combined with a User Defined Analysis consisting of a Distance Measure related to Field Points and multiple bodies. Note it would also be nice to have a 3D curve projected on and saved in all of the parts to establish the clearance boundary. See PTC case 11359592 For the powerpoint file showing the idea s
Please add the abilitity in Mechanism to do Batch Mechanism Analysis along with automatic saving of Graph Measures to predefined Excel file names, save play back files, and allow it to also generate mpg files automaticly in Batch Mode. See http://communities.ptc.com/message/202504#202504
Reference Case ID: 11729647We would like to know how to call the true dimensions/driving dimensions of the punch/die in the punched part on the impression created by the punch using Show Annotation option.
with the pull command it would be usefull if you could select an owner where a new part will be created.at today its possible to type the name of the assembly you want to place the new part in, but in large assemblies this is not easy.as a work-around i often create a new part and place it under the root, then i use the copy command to place it in the right sub-assembly because the copy command does have the possibility to select an owner.
you cannot perform the command change edge radius on an edge with a blend.the command does contain the option Redo Blend, but this does not seem to work. i think while executing, the blend should be suppresed and the change should apply to the original edge. afterward the blend has to be replaced, like the move command does.
When a Part is set to 'Active' the Viewset should also be set to 'Active'. This is more logical when creating views in Annotation from the Active Part. Now the Active Viewset can be of a different Part. See example.
HiPlease set a default name for all features in the model tree like surface or curve.Why ?Because if you have many many features in your model, you rename 2 or 3 curves feature of 20,and if you make a search with this query ( for exemple ) : NAME != CDEV* ( for layers rules )There is no result because others curves have no name !Actual solution: rename all features manually ( very time drop ) I have a PTC Call & SPR Closed for this
Ok, this just makes no sense at all. I've set up my mapkeys, saved the options file, they work fine in my part files. The minute I'm in an assembly mode, mapkeys are disabled. That's insane becuase they behave as if I left to work outside my application. But I'm still in Creo, just working with an assembly file. Why would your mapkeys not apply in an assembly mode? Simple stuff like show/hide construction planes, etc? UPDATE: Ok, I finallly figured out how to fix them. There were multiple config.pro files, one in main PTC directory, others in various project folders whenever they were the working directory, and config.pro became a horrible mess. Creo does not save mapkeys to 1 master file, it kept saving them haphazardly to various config.pro files in differect locations, so hotkeys did not function properly. I got rid of all config.pro files except for 1 in current working directory, and synched up all the correct mapke
Toolkit has a function to output CL data files but it doesn't have a function to postprocess and output the G code. ProMacroLoada() function workaround doesn't work on no-graphics mode. A Toolkit function to postprocess CL data files will enable to develop a customization to automatically output and postprocess a lot of files.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.