Recently active
It should be possible to make broken leader lines or break an existant leader line
Add the functionality of renaming subassemblies automatically, to acquire their active Simplified Representations names on a main assembly, when Saving a Copy of that same assembly.
Currently, Creo P2 does not accept pre-selected entities when starting the Scale function in a drawing.This is particularly problematic when entities are scaled up too much and overlap other notes, tables, sketches, etc. Instead of just rescaling the entities which are still selected, the user has to re-select the entire area and the painstakingly remove unwanted entities from the selection.PTC, please add pre-select functionality to the Scale function.
Es sollte möglich sein über verschiedene Ansichten zu bemassen. Die Bemassung sollte assoziativ sein. Bemassung mittels manueller Geometrie ist falsch und daher keine Lösung. Danke für Umsetzung.Freundliche Grüsse Urs Ammann
Das Feld ElemName sollte einen Default-Wert beim Neu anlegen einer Simplification erhalten. Dieser sollte in der Anpassungsdatei ds_customize eingetragen werden können. (simplify::sfy-set-default-parameter ......)Besten Dank für die Umsetzung.Freundliche Grüsse Urs Ammann
When Dual Dimension the number in parenthesis has a space after the number and before the right parenthesis. M190 version WF5See below:
It would be useful if when transferring 3D Docu-planes from Modeling to Annotator that any 2D Geometry drawn onto or within the 3D Docu-plane is transferred to the view being created in Annotator.This would come in handy when wanting to create the image of a hydraulic/pneumatic schematic that is to show as a silk screened area on a control panel, to show the travel outline of a mechanism or to show the possible location of casting material on a machine part.
Slider constraint lacks option to define max and min limit via reference not just distance.You have that option in slot but not in slider(or pin for that matter).1. Add option to define max and min limits with references.2. Add option to define max/min limit with +-offset from reference. Filling in just offset and not reference would be the same as curent fuctionality meaning offset would be used as distance.
The following is an enhancement request from HOSHIZAKI ELECTRIC Co.,LTD..Although it is a semicircle model, a detum axis center line is despayed on the whole when setting detail option "radial_pattern_axis_circle = yes".The center line is displayed till an unnecessary place. When holes are created by directions up to 180 degrees with an axial pattern, They would like to display a detum axis center line to a semicircle without the unnecessary line.
very useful for large data
Create the ability to merge selected sets into a single set in rounds, chamfers, etc. features. Often decisions are made or geometry changes after the model has been created with rounds, chamfers, etc. that make multiple round sets within a round feature unnecessary (same for chamfers)...their radii has become the same. Currently, there is no way (that I know of) to merge these sets into one. We are forced to delete the sets and reselect the references if we want only one dimension to modify. It would be much better if we had the option to merge selected sets into one. Size of the radius or chamfer would follow the dimension of the first set selected.
PTC C11138802(11138802): Update an existing assembly with function insert shared data emn/emp files (IDF3) with copper tracks. By default all components are set to "YES" and all tracks are set on "NO", and it is overwhelming to set tracks to YES one by one as there are no productivity tools.We are asking that Creo 2.0 has the following enhancement
Hi,when I have petterned a part in an assemblie and grouped that pattern together with other komponents then I'm unable to redefine the placement (or for example the flexibility) of the leader of this pattern.I have to ungroup first. Then i can redefine and after that I have to group again.documentation to this in case 11855594Bye, Matthias
In 2D drawings and prints, line thickness and weight can be modified through the pen_line_weight and pen_line_thickness config settings. I think it may be a good idea to add a config setting for the thickness of 3D dimension lines and 3D leader lines. Another option may be to define the line thickness in the Text Styles settings in the Dimension Properties.
Es sollen weitere "Texte im Kreis" in das ZS-Symbol-Feld hinterlegt werden können. Speziell für die ISO-Norm 8015-2011 sind die Werte (P) und (R) vonnöten. (e164 und e1e4). Besten Dank im voraus für die Umsetzung.
In CAD applications should be no fonts loaded from "C: \ Windows \ Fonts". It should be only loaded fonts which PTC in the installation provides. Note: There is a very large source of error in the CAD data exchange
This would allow similar commands, basically toggles, to be assigned to one button instead of two. It would help reclaim real estate in the toolbars.
We need the ability within Modeling to secure surfaces of parts so that they are not included in the creation of a section view within Annotator. This would help facilitate the ability to create an Aligned Section View where as the Section Line crosses through the center of a gussett or rib feature on the part.See example below taken from the AMSE/ANSI Y14.3 - 2008 Multiview and Sectional View Drawings Standard.
Cross reference: http://communities.ptc.com/ideas/2679One I prepared earlier...Further to my original idea, may I propose that PTC enhances the 'Redefine' and/or 'Edit Definition' dialogues as follows:In the RMB Menu accessed when I right-click a reference, add a 'Replace' option.Then, when I either select the incorrect reference during the original creation of the feature, or when my feature fails regeneration because a reference has gone missing, I am able to replace that reference with the appropriate one.As an extension, make the Edit Definition and/or Redefine dialogues maintain their settings, even when a reference is replaced. For example, imagine I define a datum plane which was defined as parallel to another plane and through an axis. Imagine that, at a later date, my axis goes missing and the datum plane fails. I enter the 'redefine' dialogue and right-click, 'Remove' the missing axis, preparatory to selecting another axis that does exist. Unfortunately, the first reference,
The "CANCEL-BUTTON" is preselected with the "check out on the fly" dialog box. Customer asked if it is possible to switch this preselection to the "OK-BUTTON"?
Undo (crtl-z) is working in several areas of Creo Parametric but not in Cabling environment.In particular, when we want to modify the network after the first routing. If we move a location to a plae that make the routing fail, it's hard to revert back into the original state. Same consequences when we delete a position.
Need the possibility to define a text style for Sheet Metal bend texts.Currently only the size is customizable in the shop file.Possible should be to customize the font, color, slant, balloons and frames and the location point where the text is placed.
HelloOur customer has 9 Creo Elements Direct Modeling 2 Advanced Design13 Model Manager 8 BOM Editor1 3D AccessAnd has an active support contract.Release installed : 18.1M30In workshop has a Workstation with Model Manager and 3D Access Installed where Workers can view 3D Models and Drawing.Our customer tell me that can't view Animations created using Modeling from 3D Access.We ask ptc to consider this new functionality, thinking that some information like animation are not viewable now from 3D Access,Thanks you.Alessandro
Today it's not possible to propagate Windchill attributes when ModelCheck is run from Distributed Batch. See document SPR 2083994 and CS26930.This is an realy important function to check our models in library.With best regardsMartin Meier
Currently, the vertices of a 3D line cannot be moved separately. Only the complete 3D line can be moved. When a 3D line has to be repositioned; the line has to be deleted and drawn again; thus the connected dimension (annotations) are also deleted. The same functionality as for a spline (move points) is recommended.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.