Recently active
In the drawing, if the dimension covers the design, it's hard to read the value. Should the value of the quotation is on a white background to always be legible.
The table in the drawing can be exported to CSV, but the delimiter is always the comma ",". Should be able to TAB as the delimiter for easy opening in Excel.
In the drawing, you can not write blank. I made 100 assembly instructions per year, it is often important to draw attention by writing in white on black background.
If I have an assembly with several patterns of washers, screws & nuts and then I decide I need to create a sub-assembly and that sub-assembly contains some of those patterns of nuts, screws & washers, at present I have to delete each pattern, Restructure and pattern again.**The idea is to allow restructuring of patterns of components, without having to delete the pattern first.**This is the case in WF4, M220 - maybe it's fixed in CP2, I don't know.John
Current Pro/E (Creo) functionality has a parameter in bulk parts for BOM_REPORT_QUANTITY. It would be nice to have this parameter available in other standard (solid) parts or even assemblies. My current situation is that I have a part that is injection molded as a 4-ganged part. It can be used as-molded in a 4-up configuration, but it can also be cut into individual pieces, which has been modeled as a family table instance. Whether I assemble the part as the full (4) part or the single (1) part, the rpt.qty parameter in my BOM table returns a value of 1 for each part installed. I would like the ability to make the single part to return a BOM_REPORT_QUANTITY of 0.25 since it is 1/4 of the 'full' molded part. I do not want to create a separate (unique) part number for the 'single' part since it would show up as a separate line item in the BOM table. The only way to control the BOM table report quantity with the current functionality would be to m
The current functionality as defined by PTC as working to spec creates an additional assembly & adds a suffix to part names when opening a assembly step file. For more information please refer Article https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS42608 I would like a option to use the original structure. I know how to manage my files and don't need PTC to protect me from overwritting my original files.Use Case:Extra assembly file is created that must be managed or restructure assembly before saving. (work that should not have to be done)If trying to dumb down parts/assemblies, restructure & renames required. (work that should not have to be done)When creating STEP files for customers/vendors I need to reimport to make some changes then export again. Then on the customer/vendor side the part names don't match the PDF's of drawings supplied.
When an Annotation drawing with a sheet scale that is not 1:1 is exported to a DXF file then when that file is imported (e.g. into Drafting) then the scale is not respected - it appears in the scale 1:1It should be ensured that such a drawing is exported to a DXF file that respects this sheet scale.
Copy geometry is currently misbehaving when used with default layer options that would normally put planes on the planes layer, curves on the curve layer, surfaces on the surface layer, etc.. This occurs when more than one type of copy geometry feature is selected. If I pick a skeleton axis, a skeleton curve, and a skeleton surface for references when creating the copy geometry, the curves and surfaces get thrown onto the axis layer. In order to get it to behave correctly, I have to create three separate copy geometries each for the axis, curves, and surfaces. It should just follow the def_layers options as to what layers entities within the copy geometry land on what layer.
Hi,it could be a real advantage if CREO Layout is able to import predefined views(e.g FRONT,TOP,RIGHT)similar to cross sections from a CREO Parametric model.This idea was raised very often by customers in CREO Layout demos.Benefits:-Very easy way to generate concept drawings-It´s not necessary to create a drawing in CREO parametric only to make views available in CREO Layout-Sometimes it´s easier to work from a complete view instead of a cross section-Views from different Assembly could be assembled in 2d to get concept assemblys for proposials, inquiry etc.
Please add the HIDE command to the right mouse button menu while in import data doctor environment. When working with imported surfaces, if we want to hide one or a few of them, we have always to go to model tree to do it, leading to unnecessary mouse travelling.
The spin center in Creo Simulate Results currently has two annoying problems:The spin center doesn't follow the creo environment or config.pro in the results window. It's defaulted to always enabled so I always have to uncheck it. When I'm looking at the results of a bracket in the wing of an aircraft and the spin center is in the nose, it becomes very frustrating when spinning the model makes it disappear off the screen by 100ft. It should follow the same settings that I have in creo for modeling.The spin center remains on even when the spin center button isn't activated when using a 3D mouse. It works for a normal mouse but not a 3D mouse. Hello! It almost prohibits the use of a 3D mouse in the simulate results viewer.Please just make the results window do the same thing as normal creo or creo simulate model windows do! Or even better, do away with the results window and merge the functionality into the main model window....now that would be cool.
While editing coordinates in Creo Parametric, system displays all offset and rotation dimensions, though user changed only one dimension.In Pro/ENGINEER 2001, there was an option to display only changed dimension.I would like to have an option similar to version 2001, where system displays only changed dimension.
ProSolidOutlineCompute returns an error if called on a model opened via ProAssemblySimprepRetrieve and the simplified rep excludes one or more .prts/.asms.Case 1839200 (https://www.ptc.com/appserver/cs/view/case.jsp?n=11839200) has the attachment “Simplified_Reprsenation_Error_Docs_Examples.zip” which illustrates the problem.
Instead of having just the thickness*2 values or thickness as an option for the pull down, how about adding an area or a table where we can input our tables values based on a gauge of metal. This way, when you click on the inside radius pull down you will see your gauges and the inside radius will automatically be input based on the values in your table. For instance: 18 gauge would equal a .030inch radius. All you would see in the pulldown is the title you input (18G) for example.
Mike Smith, Senior Technical Support Engineer recently supported me on case 11347738 that accomplished this task but would like to refine the method and have the color mapping work together with outputting a file.The task was to measure the thickness across a large surface and export a file with the thickness and x,y,z location at every point, the goal was to output up to or better than 30,000 thicknesses and their location. Mike was able to resolve this issue but had to run User Define Analysis separate for the color mapping to work. My suggestion is to have a command/technique in CREO parametric that would measure the thickness across a surface, output a file showing the thickness and x,y,z location and also have the color mapping show visually how the thickness changes across the surface.Regards,Mike Rubino
As the harness is actually a separate model we obtain only one WT-part in the structure. It is necessary that for each type of wires and cables will created its own WT-PART with the amount measured in millimeters (or meters).That is, the Widchill must create structure WT-parts by features of harness model.
If I share an assembly, the assembly is marked as being shared, but the parts in the assembly do not show as being shared. This is inconsistent because I can do a search or filter for shared parts, and they are found. It is also confusing since it looks like there are no other parts loaded that will be changed, but that is not the case. I understand that it is not a true shared part, but maybe there should be a different icon indicating that it is a "special" type of shared part. Maybe something like this:
La fenêtre de sélections serais plus prtique à cet endroit.
i want to create a pattern, the first and last feature should be located a certain distance from the start and end of my part. the distance between the features should depend on the total distance.The position of the first feautre is defined when creating the feature.I start the Create Pattern command. To define the position of the last feature i would like to use the reference cones to indicate the distance between the end of the part and the last feature, but the reference cone always point toward the second feature. the green reference cone can not be placed on the last feature.
a 3D annotation on a machining feature does not support the move command. i get an error: cannot solve local operation.fix this please.
SheetmetalAt the moment when you bend a plate, you can set the k-factor and the cut file (dxf) is fine.Problem:What do you do when you have to cut a plate and there are 2 processes linked to it.1. A normal bend.2. Rolled section.Answer:Now you have to have an option to set the k-factor for each process.PTC can you add this option to Creo in the future?ThanksMarinus
When starting Creo/Elements Pro and Creo with Windchill PDMLink 10.x connected the login-window for PDMLink poppes up first when you open or click on the work space symbol. Please create a config.pro setting for the login-window so it can be choosen to pop-up directly on upstart or not.
In Annotation, we'd like to have better Dim text alignment.If it can be done automatically, it would be nice.Please look at the attached image below.Currently, we have the Dim text in red rectangle.But the one in blue rectangle seems better.If it is aligned as the one in blue rectangle automatically, it would be nice.Regards,
I recently encountered a problem while creating artwork for product labels in Arabic. I received a Microsoft Word document with the Arabic text. The text appears correctly when opening the Word file. The text also appears correctly when copying and pasting into any of the text editors in Creo Elements Direct, whether it's in the modeling environment (Text to Profile), in Annotation, or Drafting. When I hit the Ok button to apply the text, the text reverses direction and the characters change to something else. The only solution I currently have is to create a PDF of the Word document and then use 3rd part software to create a DXF file and import into Creo Elements Direct. This result gives me a rough outline of the geometry that can only be scaled via Modify Scale command. The text is not filled as it is the Word document or easily re-sizeable. I think that Creo Elements Direct should be able to properly process all fonts, characters, and languages in any of the text edit
The function "Copy" in the menu "Geometry" in Annotation allows you to copy geometry which you can then paste to a work plane in Modeling.Unfortunately it copies everything within the specified box. This means that the geometry that is not required must be deleted from the work plane afterwards.It should be made possible to filter the geometry that is to be copied so that for example center lines, hidden lines and tangential lines are not copied.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.