Recently active
You need to add a way to increase the visibility strength of the coordinate system in the model. its hard to see which way the x,y, and z letters are facing. This could be a paramater setting.
Today in Creo elements direct you can find the center of circles Arcs and lines ussng control-shift. Why not extend this to a box or ovals/ellipse/spline elements?
Modify the option to the Pull Linear command that pulls in both directions to allow entering a different distance in each direction.
When we create a cylindrical feature like extrude of circle or revolve, it automatically creates an axis however the axis is not available in the model tree. It would be better if the axis is available in the model tree may be under the respective parent feature. So that we can select the axis from model tree when assembling.
Where do I start? The results window has not changed in any meaningful way in the 12 years that I have been using ProE/Creo. My presentations of Simulate results look primitive compared to other CAD companies.
Some data for the form and position tolerances cause a text in the balloon behind the measure text. A Postfix should be represented therefore in the balloon. Examples: SR, SN, SM, APPROX., GN,…When editing the dimensioning text SR is to be represented as Postfix.German:Einige Angaben für die Form- und Lagetoleranzen bedingen hinter dem Masstext einen Text im Ballon. Das Postfix sollte daher im Ballon dargestellt werden können. Beispiele: SR, SN, SM, CA, GN, ...Beim Editieren des Bemassungtextes soll SR auch als Postfix dargestellt werden.
It is helpful to offer different source directories for fonts used in 3D sketches and drawings. Customer uses fonts in the drawing which should allow a export to neutral 2D formats (IGES,STEP, DXF, DWG, PDF, …) without getting unreadable, character replaced or stretched. TrueType fonts are needed on the other hand to create e.g. engraving, cut outs or type/name plates in the 3D sketch but they should not be used as drawing text, note or displayed parameter. More to this Idea follow: PTC C11973044 (Pro/ENGINEER and Creo Elements/Pro): Is is possible to make TruTypeFonts available only for sketch
In some cases (not so many), we'd like to enter multiple lines in customized thread dimensions.If it is supportted, it would be nice.Thanks,Mika
When selecting a center point for a new machining feature, it is not possible to reference geometry that is not visible. By activating the wire frame representation (by pressing the F6 key), this geometry can be made visible. Howerver, it is still not possible to project such geometry (PlanarCopilot=uv) onto the selected face for a new machining feature.Workaround: by changing the setting PlanarCopilot to 3D it is possible to catch the center point.It should be made possible to project geometry (setting PlanarCopilot=uv) that is only visible when the wire frame representation has been activated.
It would be nice if one could pan and zoom differently in each sheet of a drawing. This would allow a review of different areas of each sheet by only switching sheets rather than also needing to pan and zoom "back and forth" with each sheet change.
There can be a module or special license of using weldings for ASME welding techniques and dimensions with satisfying the ASME rules. This would be very helpful for pressure vessel design in CREO.
When selecting a cylindrical face that happens to be part of a machining feature in order to define a clipping on its axis, then this only works if the feature consists of only one face. If it consists of more than one face then it produces the error message "Single selection required".Workaround: change the selection focus to "Face" and then reselect the face.It should not be necessary to have to change the focus. It should be made possible to set the standard selection to "Face" rather than "Custom Feature". It would still be possible to set the focus to "Custom Feature" if required.
Tolerance values lost when switching the type of tolerance in Annotation
Offset lines should have their own layer type so that they may placed on a custom layer of the client's choosing, instead of being automatically placed onto the datum curves layer with all the other curves. This will give the user more control in drawings when it is desireable to view the offset lines but NOT any other 3D curves which may be present due to previous construction.
It's may be time for PTC to enhance the Pro/CMM application to allow for 5 axes probing. Renishaw has developed the PH20 infinite positions probe allowing for 5 axes movement. PTC already supports 5 axes movement in Creo Manufacturing and it should not be too difficult to keep Pro/CMM up to date by adding this tool path style to the CMM application. Links to example movie:http://www.coord3-cmm.com/renishaw-ph20-infinite-position-cmm-probe-head/http://www.youtube.com/watch?v=sZGMWu1gnOk
We would like the dimensions shown in the hole table to update automatically when the part is changed. We don't use them much so some users do not know to use update tables and a few PDFs have gone to shops with the wrong dimension because users didn't check the table after updating the hole location in the part.I realize some users manually override parts of the tables and do not want them to update. A config option that forced tables to update when the drawing was opened or the model was regened would allow both of us to be happy.
Currently, if you mirror a flange or a flat in the sheetmetal module and change the source relief, it will not update in the mirrored feature. Many engineers would assume the mirror automatically updated the feature and wouldn't look too closely to see that it wasn't mirrored! Please get this implemented as soon as possible.Thanks!
Hello,When exporting Creo drawings to dxf we noticed that anything that was set to phantom line font (components set to phantom opaque), some lines are showing solid instead of phantom. Upon further investigation, we found that the linefont scale in the dxf is too large.We need a config option to control the linefont scale when exporting from a Creo drawing to dxf.This is a problem for all our Kit drawings where the reference assembly is in phatom line and the bag of parts in the kit are the only thing that is solid line. Since the dxf files are not showing correctly, then it is very confusing to tell what parts are really in the kit and what parts are not supposed to be in the kit.
Repeat Region is very hard for beginers.I think beginers can use Repeat Region if it's interface changed.The interface image is like 1.pngSo please look at a 1.png file.This is no complete.want to share specific ideas about it form now.I
When editing a feature the dimensions are not visible without zoom out. It's been like this since we started this whole Pro/E bus ride folks. Can we have the dims actually appear "near" the feature we are editing?
Revise the default color scheme for draft checks to be 3 colors. Assuming the user is checking for X degrees of draft, all surfaces should display in one of 3 colors:One color (Blue?) for draft greater than +XOne color (Magenta?) for draft less than -XOne colr (Yellow?) for draft between +X and -X.
We need an exploded view "history tree" so that exploded states can be parametrically modified and adjusted. The tree will show each of the components that were moved, the direction, and every one of them can be modified, deleted, or suppressed. Very similar to what we already have for assembling components. Maybe even take it a step further than the CAD programs that already have this functionality and incorporate exploded view skeletons for a top-down approach to exploded views. Here you would define each datum of an explosion (datum plane or similar) and then define what components belong to which datum. The explosion can then be modified easily by adjusting just the skeleton datums. But maybe that's asking too much...
Creo has a Move to New Subassembly function, but it doesn't seem to work on groups in the Model Tree the same way Solidworks handles it. It seems I can ungroup the parts in question and get it done that way, but why can't we do this by making a single click on the group?
In the drawing, for a detailed view, we must select the area with a spline of any shape. I want to select with a true circle. This circle must appear around the zoomed view. This is very important to make magnifying effects in the assembly instructions.Here is an example of the results that I am seeking :
I do many assembly instructions. To show the changes at each stage, I change the display style rooms: - lines in grey for old parts- black lines for new partsMy problem is : I can change the line color, the background is always white. The idea is to change the background color of the pieces (white or + / - dark grey).Here is an example of the results that I am seeking:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.