Recently active
I wish to have the same rule for MMB (middle Mouse Button) - still we have many exeptions like sometimes it will not approve the feature window like in Solid Freeform manipulation or like in Warp wher after MMB click we create another feature on the deformation list...
as in topic I think we should have option to choose if we wish to store trail files or not...
during save or backup add opportunity to save without 3D preview or when insert here is on the beginning - due to decrease file size e.g. for e-mail attachments etc.
Open application in maximized size not the same as option open_window_maximized=yes, because user still must click middle button for maximize or double click on the top bar...
It was primarily vote to kill old mode with "resolve_mode", but because votes go down I changed the request to PTC in this idea just to repair this functionality, so please start vote up! Because even in Creo 2.0 this switch in background to "resolve_mode" and still exist in Creo 3.0 - I vote here to repair option "Regen_failure_handling" - I think it isn't worth to come back to oldfashioned way of working - nad the most important is that Creo shouldn't switch incydentally by self to oldfashioned mode! The main reason of my vote is that this parameter in unexpected way can switch to "resolve_mode" and to fix back to "no_resolve_mode" it is really time consuming process for advanced models with e.g. 2k features, because first user must choose "suspend all" option wait for regeneration and because cross section are at the bottom after this can fail again so if cross section is base on core datum plain user must again choose "suspend all" and as result all part features wil
I vote to have an option e.g. in config "Save layer status with the model" set as default to yes!This is easy to solve by a mapkey for saving the model, but non-experience user can be really surprised next day if open the model from last day.For meself I know if we save the model from the drawing and previously we hide some elements within drawing enviroment then without separate save status you can be also surprised...
When creating tags based on an existing assembly, references (e.g. faces) resulting from assembly cuts where not recognized.They have to be created manually in the reference pairing table.Would be great to forward this references to the ref pairing table, since this is time consuming and a source for errors.
Hi,In creo-drawing should be possible to make a link to a drawing inside a drawing.If we have two differant versions of an assembly drawing and a part drawing. In both asm drawing we need to put a view or a sheet of the part drawing that keep linked with the drawing itself so we do changes on the part drawing and it will be passed to the asm drawings.A little bit like overlay but were you can move around on the drawing and control the scale.
With Creo Parametric 2.0, from an assembly with complex component geometry, it is currently not possible to create directly an envelop or shrinkwrap as solid with fill hole attribute and without internal geometry or topology.Using Create Envelop with different options like Surface Subset Shrinkwrap or All Solid Surface Subset Shrinkwrap with attributes Auto Hole Filling Include Quilts allowed to get a solid part with correct external shape but also with internal solid geometry or topology.Instead of internal solid geometry or topology, we need to get the envelop filled of material.
This idea would be useful to somebody creating multiple remove material extrusions when all the extrusions are through all. If you set the config option auto_add_remove to yes and use the drag handle to push/pull an extrusion all the way through an object to remove material, the specified default depth value may not meet design intent. The key here is that the extrusion is dragged past any possible material to be removed and extra depth has no real function. Rather than go back to the ribbon to select the through all depth, have a config option that works in conjunction with the auto_add_remove option. If auto_add_remove = yes, then auto_through_all (a config I just made up) can have a no*/yes option. Default no* will allow the specified depth value of the remove material extrusion to remain a modifiable dimension, even if it is past all possible removable material. If auto_through_all is set to yes, then the through all depth option is automatically
There is a config.pro option for switching off the preview window while redefining a Simplified Representation needed. This issue is critical especially in regards to large assemblies.
When I create a new drawing in Annotation, the model is displayed in an auxiliary 3D VP to decide directions.I often think that it’s more convenient if I can display section of the model in 3D VP.
For current, user only can rename Annotation sheet to number, just rename sheet number, not really rename sheet name.Should add ability to rename Annotation sheet to non-number character, for example, English and non-English language characters
In a family table, when you suppress an item (feature or component) in an instance - anything that references this will also be suppressed.It would be useful to have a warning, or at least visibility of the other items affected.Example: we have a complex assembly with many inter-related components - and an instance had 4 out of 40 missing. We puzzled over this for a while until PTC Tech support found it was due to a reference to a suppressed component higher in the tree. If we had a warning, we could have spotted it much earlier!
If I have one bend in a part, I will use the flat command. Then, as I am designing I realize that I want to add another bend along the edge next to it. The way that the corners interact is not good if you simply add another flat. I want to use the flange commmand. Unfortunately to do this, I have to delete my flat, and recreate to whole thing using the flange command. We are always, in my case, dealing with sheet metal part bent in a brake press, so no curved flanges. There are three ways that are possible to fix this. 1. the best way would be to allow the cntrl click to add edges to a flat. You could have the options that you need for corners treatments greyed out until you have more than one edge selected.Or2. create a command to transform a flat to a flange so that you could add more edges to a part. I could see this having more issues becuase of the different types of flanges vs flats. In the sheet metal industry, I think most of the time a simple bend is being used.Or3. make it so
z.Bsp bei Formelement, Machining, wenn bestimmte Gewinde oder Bohrungen nicht erforderlich sind sollten diese auch löschbar sein. (Über Optionen, MF-Leiste anpassen derzeit nicht möglich)
The text on a drawing is not searchable when you export it in Drafting to PDF format. I would suggest to make it possible to convert the text to searchable text entities when you export it.
Ansichtseigenschaften, Sichtbarkeit: verdeckte Linien berechnen muss aktiv sein, damit diese bei Sichtbarkeit abgewählt werden können.Sollte eigenlich nicht erforderlich sein.
At the moment I can open one selected row (instance) of the family table via RMB or the "open" button.This functionality should be also available when I select more than one row in order to allow all selected rows (instances) in separate windows at once.That selected rows must not necessarily follow each other. I just want to select let's say the 2nd, the 4th and the 7th row and open them at once.
Video Link : 4937 Video Link : 4936 The FMX is great technology, we can modify or rebuild geometry arbitrary.We hope the FMX technology can be add into Sheetmetal mode,it will be a great improve,I think.At the same time,with regard to such as stp igs and so on,if work under the Sheetmetal mode,I hope can add some commands to discern and transform into Sheetmetal mode(see the picture)Thanks!
Currently you can select an annotation from one Combination State and go to the ribbon and select "Add to State" and then select the state you want to move it to. Then you have to remove the annotation from the current Combination State. It would be nice to be able to select the annotation and then RMB and select "Move to State" much like the "Move to View" option in drawing mode to reduce clicks.
Applies to: Creo/Elements Direct Modeling Annotation Problem: Saving drawing on A4 sheet in portrait orientation to a model manager with "create pdf" option enabled results in pdf drawing being saved in landscape orientation only with wrong scale. Changing PDF_Generic printer properties (swapping sides, changing orientation, etc.) won't work in any combination of properties (tested on Creo Elements/Direct 18.1 M050). Resolution: Finding a way to edit AM_PLOT_MACRO so it knows which orinetation to use when saving A4 portrait.
When exporting a Model to STEP all surfaces that are visible in the active combined state should be exported if the option “surfaces” is selected. The paradigm should be “what you see is what you get”. The export result should always represent the current situation of the model and include all visible objects at the time of the export. Right now the use of isolated Layers gives a different result than an export with shown layers. The export should always be independent of the used layer functionality.
Currently in Creo Parametric, users cannot select silhouette (tangent) edges for the chain or loop options of the use edge and offset edge functions in sketcher.I opened a case with PTC and got the canned "works according to specs" response.PTC please allow users to select all available edges, including silhouette, for use edge operations.
Currently the message log window only shows a history snap shot. I think it should be dynamic and constanly update. I would like to see the last say 30 messages, not just the few that are visable at the bottom of the screen.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.