Recently active
Allow the ability to group instances together in the family table. This would allow for better organization. For example we have a family table of standard washers, 2 different materials. Unless you create them in the appropriate order your instances could be spread out among the table. I think this would also be beneficial with http://communities.ptc.com/ideas/2043 to sort/reorder/reogranize within and into the groups.Today the work around we use is to add comment lines to visually break the table into groups. Though without idea 2043 to reogranize, we're stuck with how the original person created the table and trying to interlace any new instances appropriately.
Add the ability in Creo View to select a flat surface and make it parallel to the screen.
Currently if a part/assembly has inputs and is used in a assembly without a executes for every input line you are prompted "Choose source of values for Pro/Program inputs for model XYZ" during regeneration.I would like a way in Pro/Program to execute the Part/Assembly and pass the source of values as "Current Values".Example may look like: EXECUTE PART XYZ JOB_NO = JOB_NO TOOL_NO = TOOL_NO PRODUCT_DESCRIPT = PRODUCT_DESCRIPT CURRENT_VALUES All remaining inputs END EXECUTEand/or EXECUTE PART XYZ CURRENT_VALUES All inputs END EXECUTEThis will give the ability to not be prompted for values when regenerating an assembly that contains the component but does not control the component.
Relate option is not available in 3D annotation for grouping of annotations elements like gTol, note and symbol.
Balloon note annotation element is not available in 3D annotations.
In 2D drawing we can insert external objects like image, where as in 3D annotations environment unable to insert graphs or bmp images in particular combine state.
In 2D drawing we can select all annotations by dragging mouse cursor over all annotations but in 3D we have to select each annotation element one by one, using shift button.
In Pro/Engineer, a user was able to change the table origin and it would simply change the direction the table grew and the defalt point used to locate the table. Now, in Creo Parametric, changing the table growth direction reformats the entire table and its contents, including switching the order of the columns, causing users to have to reformat any tables that simply need the origin changed. This causes users to have to decide to spend time reformatting entire tables, or using tables as-is and moving the table every time there is a size change. PTC please fix this functionality so that tables remain in their correct format when the growth direction is changed.
I was very excited to try the new native SW native import. Coincidentally or not, the first part I chose to import completed and reported that SolidWorks Import was successful, but there was nothing on my screen. I had to open the dummy assy layer that held the part, then open the Quilts container, then turn on quilt.1 to see the geometry. I'd be much happier to open a part, and just have it show up as a surface part.
There are many instances where fasteners like bolts and screws pass through more than 2 components (washers on the top and bottom, gaskets in-between the parts e.t.c.)The BIGGEST weakness of Creo Simulate's fastener idealization is the inability to support this. 95% of the frustrations I experience from customers when I train them on this functionality is this exact limitation.
Currently, the model max of a Static Simulation results fringe plot can be reviewed and the coordinates at which that value occured can be seen. But its impossible to review fringe plots for other quantities and query the values at the same locations without just guessing and clicking.In othe words, If the Maximum Shear Stress fringe plot shows Model Max at point (0,1,0), the ability to reviiew the Max, Mid and Min Principal Fringe plots and query the results for the values at point (0,1,0) would be great.This is impoortant because one approach of calculating the fatigue life of pressure vessels according to design codes is to do exactly as I described above, and input the Max, Mid and Min values into a formula. Unfortunately, there is no way of querying that right now.
Create a measure to report the preload value in a 3D preloaded bolt in a Static Simulation analysis. Currently, if the bolt is split using a volume region, and defined contact with the surrounding parts, the only judge of how much preload is being applied is the Interface force measure at the bolt head, and that value changes whenever the size of the volume region of the bolt changes.Creating a measure that reports the value of the preload in the bolt will confirm too the user that the appropriate amount of preload is being applied to the model.
Automatic workpiece created by "Mold > Workpiece > Automatic Workpiece" only allows to specify mm or in: - With Units mm always generates a part with unit system mm Newton Second - With Units in always generates a part with unit system inch lbm Second (Creo Parametric Default) - Other unit systems are not supported and hence cannot be set Allow at least to set all predefined unit systems in Creo, e.g. MKS (meter kg second) or MMKS (mm kg second). Even better would be to enable also setting customized unit system, as it is possible for templates. The sibling function "Cast > Die Block > Automatic Die Block" for Casting should be enhanced the same way.
I frequently draw underlines below texts to notice texts written in drawings. I always must adjust length of underlines length when I modify texts. If the Modeling has underline as attribute of text fonts as Microsoft Office, I become unnecessary adjustment of line length.
A lot of analysis is done using beam elements. It is common to simulate fasteners using beam elements. There should be a way to back out the beam loads from those elements.
Both the tool-oriented method and the object-oriented method should offer the same options.The object-oriented method of calling "Sammeln / Elemente" should also offer the option "Veralt lösch Maßst".
In Creo Parametric Creo 2.0 the preselection of the components in the model or parts in the asm doesn´t work when moving up or down in the model tree using keyboard up and down buttons.
Ribbon menu are too easy to switch, they frequently switch without notice just by moving the mouse close to it or zoming with the mouse then getting to the menu. Please add config.pro option to stop ribbon menu switching on mouse movement or with the mouse wheel.
Not required, such as hidden lines appear and perform the drawing of the model exist, such as mold, a complex surface, tedious very to fix.I hope the following contents.・Want to be able to select the surface and edges you do not want to see・Information hidden lines after the position of the surface were instructed on a view of not drawing.Language:Japanese金型など、複雑な面が存在するモデルで図面化を行うと必要無い隠線等が図面化され、それを非表示修正するのに非常に手間がかかります。図面化しない面や稜線選択できる、または、ビューに対して指定した面の奥行き方向は隠線を図面化しない設定が出来る様、希望致します。
Very inconvenient that help document has not been localized.
The icon bitmap of Creo Elements/Direct Modeling and Creo Elements/Direct Model Manager are same. And our customer often makes a mistake, He selects Creo Elements/Direct Modeling icon from "Windows Task Bar" in spite of he needs Creo Elements/Direct Model Manager. You may need to change the icon of Creo Elements/Direct Model Manager.
Create your own line style is possible in Drafting, but it has the inconvenience can not be created in Annotation.
Das hinzufügen von weiteren Befehlen in die Leiste würde das Arbeiten mit Creo noch weiter verbessern.The adding of additional commands in the bar to work with Creo would further improve.
To switch to simplified representation more quickly, please show existing simplified representation in model tree, just like display x-section in model tree.
There are no support for Options & Variants in Creo Parametric API. I need to access Assignments via API. Edit: Only me looking for this?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.