Recently active
There is currently no function to test if server is "offline". This is dangerous because a server can be connected, but offline, allowing users to still create workspaces and elements without truly being connected to the Server. Please create a function "ProServerIsOffline" to test this (can be done by evaluating the "online" files of the server cache.)
We would like to be able enhance the 'Outline' finctionality that's currently available in Annotation when creating Assy views. We would like to be able to 'Outline' a specific part\parts within a view of an assy.Currently outline, will only create an outline of the whole view.
Why are the pattern dialog boxes not labeled? This causes a lot of unneeded confusion, these could be labeled #(number) & direction 1, # & direction 2.
When you right click on ANY item you should be able to go to info/feature and the output should list all the layers that the item exists upon. Currently there is no easy way to find what layers control an item without going to the layer tree and doing trial and error experiments, very crude! nevermind, apparently this function already exists. How do i delete this?
Currently you can select branched conture in slot connection but you cant move object in all of conture only in one section.Allow objects to move in branched contures with slot connection. Slot axis would then only have regeneration position(not value) and min and max values options would be frozen(because they cant be defined in that circumstance).This would allow for creation of much more complex mechanisms in Creo.Currently:Enhancement:
Shape surface selector is a great thing why not allow it outside flexibile modeling tab.In Creo 3.0 right click on surface in model tab and flexibile tab wont give same selection options. Why not?Idea version 1:Allow shape surface selector outside flexibile modeling tabIdea version 2:Even if licence dont support flexibile modeling allow this shape surface selection. Currently:Enhanced:
In Wildfire 4.0 "Drawings" you could click in a view "right click" and pick use in model tree. Then go to the model and pick a plane or coordinate system to dimension to. In Creo 2.0 this option has been removed. You can display planes or coordinate systems and try to pick which one you need from the drawing view but if you have a large assembly it is very hard to pick the correct one.
With the inclusion of the welding module we have found that there is no editing possible for the OOTB weld symbols to remove the sequence note from the symbol tail. When we contacted tech support with a case we were told this was intended functionality. The actual sequence numbers assigned could vary from the actual production process and many times do.Prior to the Weld module our weld symbols were 2D symbols on the drawing. Now that we are trying to use the application to have welds in the model we have had to put the model weld annotation features on a layer to hide then duplicate the effort by adding the 2D symbols to the drawing.We did consider creating the custom weld symbol but that would require regular maintenance and testing with every Creo upgrade.We would request that Creo product management take the initiative here and edit the ootb symbol to add the sequence as variable text.
We would like to accurately represent a dimension on General View. Whether this is through a 3D Dim in modeling (represented in Annotation) or directly in Annotation is not a problem. In this instance it's preferable if the dims are added\created in Annotation - but it's not critical.We are aware that the user can overwrite dims on a General view, but these do not update automatically if\when the model is amended.
I vote to have ability to edit on the fly by Edit under context menu (like dynamic edit) to be able to manipulate the tweak curve like this (without going deep to edit definition / option / Tweak Curve Settings) if was enable within the curve definition:the manipulators should be visible after pick -> "Edit" from the Model Tree for the Curve Feature:also will be great to (during creation) have ability to pick surface under RMB context menu: it can be similar solution like already used in Boundary Blend RMB context menu:Current place to activate the checkbox and select surface isn't so comfortable...
If we use one direction Boundary Blend is able to work, but if we have only one boundary on the other direction we must first manualy create those boundary by another BB or 3D spline etc.In my idea it can be much simple: if user haven't got the missing 4th curve/boundary Creo use as default "virtual spline" (on fly) with conditions at end like using option "add side curve influence".This version off BB will be much more innovative as it is at the moment and save a lot of designer's time e.g. I'm using this as patch between sweeps on mainly corners of engravings and this can be even five hundred times per model, so it'll help me a lot!Example of the situation can you see on this screenshot:This virtual boundary as default will obtain free condition of course and Curve_73 should be virtually created on fly in this idea!
I wish to have influence on system value for mesh representing the trimed or merged surface.I work generally on smal suraces representing embossings on products and during merge or trim which part of surface as a result is sometimes completely invisible on shaded model - see examples:It should be visible like in wireframe view mode by smaller mesh or different colour:The same here:During merge smal surfaces this is even worse - I noticed only few single pixels to guess that this will be the remaining part of the surface:Even using wireframe view mode it isn't so clear:
Each time we check in a new iteration of a drawing, WVS Workers automatically generate a viewable of that drawing in PDF format and add it as an attachment (secondary content) to the drawing in Windchill. This PDF file is then frequently used for production, sent to the customer for approval, ...This pdf is made in windchill in the "As Stored" configuration so the pdf will show the models as they looked like the last time the drawing has been checked in.The problem is that when we open a drawing in creo we open a drawing in the normal "Latest" configuration. If we change the underlying parts or assemblies (without changing anything to the drawing) we see the correct situation in on the screenAlthough the display in creo will be updated to the present situation, the drawing will not be considered as being modifiedAs a result, when we save all objects , the drawing will not saved (because it is not modified)As a next result, since there is no new version checked in, no
Edit the tolerance of a dimension in drawing by using double click, like in the Part-mode. To have the same method.I the drawing it is usually more common to change the tolerances and so it is noticeably easier.In Creo 2.0 M110, PTC change the behaviour what is happening, when double click on a dimension in a drawing.Now you can edit the dimension directly, no need to go in the properties.So it would be the next step, if its possible to change the tolerances to by double click on it.
Today in Creo Parametric 2.0 in your list of Common Folders it lists your "In Session", WIndchill Cabinets, Workspace, etc. If you're working offline you have to go File, Manage Session, Server Management, Right click on the server and uncheck the "Work Offline" option. It would be nice if you could activate this menu through right-click in the common folders menu. At least work offline option, It already knows your active server. It could also call this server management window and maybe even the steps to register a new server since this is an existing right-click option in Server Management Window. It would be even nicer if it showed all your servers in Common Folders, though I could see that causing some confusion too. Here's a mock up example of what I'd like to see:I haven't checked out Creo 3 yet.
In creo3 you cannot easily modify text styles. You sure cannot do it when you are editing the text, unless you go to the top of the screen and click on a tiny inconspicuous arrow that pops out the text style window.Put the Text Style in the RMB drop down list, AND the tiny arrow is not intuitive, make it better.
It would be useful if user can unhighlight individual objects respectively highlight further objects in the structure browser after a browser search was executed.In some cases, inversion of highlighted objects would also be useful.German:Es wäre praktisch, wenn man einzelne Objekte, die durch eine Browsersuche im Strukturbrowser hervorgehoben wurden, wieder abwählen könnte beziehungsweise zusätzliche auswählen könnte.In manchen Fällen wäre auch eine Umkehr der HJervorhebung nützlich.
For an example : We have a curve & 4 planes intersecting that curve at different locations.I want to do multiple trim or divide into the multiple curves at the intersection locations by using those planes, in a single command.In present functionality with the Trim command I can divide a curve only with one intersecting plane/surface/point.
Assembly is partly loaded. If in addition to the assembly a drawing is created and updated, no reference is made that the data were only partly loaded. Can this possibly be adjusted?In German:Annotation: Baugruppe wird teilweise geladen. Wird eine Zeichnung dazu erstellt und diese aktualisiert, wird kein Hinweis gemacht, dass die Daten nur teilweise geladen wurden. Kann dies ev. eingestellt werden?Besten DankFreundliche GrüsseUrs Ammann
Currently, when object are checked out via right click menu in Creo Parametric, the system presents a "Checkout succeeded" message in the message area, but there is no indication of which model it was, unless the user opens the event manager.This can be very time consuming if lots of files are being checked out on the fly because Windchill bogs down and all operations, including the event manager window, slow to a crawl.PTC please add the file name to the "checkout succeeded" message in the message line so users can see which checkouts succeed without having to open the event manager.
Even in Creo 3.0 F000 I still see that cache folder exist under old ProENGINEER name!C:\Users\USER\AppData\Roaming\PTC\ProENGINEER\WildfireI think it should be changed and if user wish to use in paralel two different Creo versions the caches folders should be stored in separate folders like in this example:C:\Users\USER\AppData\Roaming\PTC\Creo\Parametric2M090C:\Users\USER\AppData\Roaming\PTC\Creo\Parametric3F000
Please all Polish Creo users vote on this idea to have Poilsh version of Creo Products available in future!Proszę wszystkich polskich użytkowników Creo o zagłosowanie na ten wniosek, aby w przyszłości PTC nas dostrzegło!
Many tips are the like "Do you know that you can do this or that?"Ok, I didn't know, I am happy to know now. But how do I do "this or that"?There should be the answer in the dialog box, or a link to the help pages.
I would like to see enhancement to the Apperance Gallery. Such as, realistic colors and textures of different metals without having to render the model. Here at our company we use both Solidworks and Creo. I am constantally being asked why Creo doesnt have the ability to apply realistic colors and textures of metals to my models. Solidworks does a great job at this. I find that Creo is much more powerful than Solidworks. It is sad that this has not been addressed yet.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.