Recently active
Sometimes it is necessary to remove history of the all part or only quilt rather than export, import and lose all IDs of surfaces and edges. It can help to improve work with imported parts whet we are forced to collaborate with other 3D systems. This capability can be very useful when we work for a long time only with surfaces, the history is too long and originally part is imported.
Hello!When I insert the assembly in drawing and insert the table of that assembly and put the baloons every think is ok. Next J insert an integral piece of this composition would be good if you could put bom balloon automatically that was tied to the table and would be restored by changing the assembly parts.
Create possivility to extract UV (Iso Curves) from surface - to do it from main GUI without IDD path.
Shell for quilts as for solids
It should be very flexible. I can choose from 3 till ifinity amount. The implemented algorythm must recognize if all point and curves are on the same plane or not. If all geomentry lies on the same plane created surface will be planar. Also as inside option must be tangency.
If i want to select one surface It must not be as carrying the cross. It is better to have in filter all types of geometry to create better interaction. Also add window some kind of other similar selector.
During start up of Creo / ProE, you have to chose which licence package you want to use.If all licences of this package are already in use, Creo / ProE shuts down and you have to restart it.Why can't the software go one step back and let me chose a different licence?Why can't the software propose possible other licences?Or even better, why can't I chose the module I want to work with and Creo can search for available licences itself?The available licences still can be defined during the installation process.This would also give us the possiblity to place links on the desktop for a quick start of Parametrics, Mechanica,...
Make a backup-save function, which will make a kind of dummy file, so e.g. without tolerances, datums, part history,... to exchange Creo-files directly with the customers but not to transfer company knowledge.There will be several advantages compared to "Step"/"Iges"such as the customer has the real and undamaged file information instead of circles build up with lines, gaps between surfaces,...
First of all improve WIREFRAME speed representation because it is tooooooo slow. As second step I propose to create Mixed Display Method. It can be useful if i have a little bit complicated zone of assembly and I want to have my working component shaded and all arround in wireframe or some other representation. I intend the creation of a separate environment that I can call when I want to recall that particular shading configuration of assembly. See I-Deas NX method.
Currently only dimensions catch the center of the PRP = projected reference point if you klick on his circle. Would be glad if all the other geometry elements would also catch the center of the PRP = Projected Reference Point Next it would be good if you can choose the Center for measurementsand also as a reference point for changes such as MOVE and STRETCH it should be catchable.
When a thead features are placed in bend area of large bends, they will not be automatically revalidated by the system. When one wants to revalidatie (select feature, modify) it is difficult to replace the center point with the correct position.Since the geometry of the thread feature holds no circles anymore. One needs extrs steps to find that new position.Also misclicking is easy and it will lead to several lsp errorsWould it be possible to have this validation done automatically ? Somewhere in te routine during the unfold the centerpoint in the unfolded plate is chosen, so why not use that, and the new face's direction for revalidating that feature ?
What do you think? It is good idea for new feature in Creo?Here is some example:Creating a pattern in sphereGOLF - Gentleman Only, Ladies Forbidden?
It would be nice if we could use if statments and logical operators in mapkeys. This would allow engineers to auotmate some actions with out the help of a programmer.
I would like to measure the total distance between multiple points (vertex) that I select.For example, I have an assembly that I would like to protect by covering it with a big sheet of plastic. To find out what dimensions to cut the plastic to I would like to click along the perimiter of the assembly and have the measure tool add up the distances between the clicked points. Right now I have to measure one length at a time and add them manually.
It would be awesome to see in the paste special menu when copying a quilt in part mode, the ability to transform a quilt or surface's location by selecting an origin and target coordinate system. Current transformations are limited to translate and rotate, which makes it difficult to stay parametric to underlying geometry.Coordinate system placement is used in many other areas of Creo (assembly, UDF's, publish geom) and it needs to also go in part mode within the paste special menu.
It is apparent that once a datum plane or axis is mirrored, you can no longer adjust the copied plane/axis size nor does it follow the original if the original is edited. This is true if you don't select the optional Varied mirror.Either the copy must follow the original after the mirroring if the original is resized or the RMB click should allow resizing specifically.The lack of allowing editing the copied datums features is a serious oversight.Preferred functionality is to allow resizing of ALL datum planes and axes from a right mouse click popup menu.At the very least, the mirrored version should always follow the original by default.It is -not- an option to re-create the mirror or pattern since this might be far up the tree and would affect a lot of work.
It would be nice to be able to grab a few parts in the model tree and to be able to quickly hide everything else. This is very helpful when assembling new parts into an assembly with many parts. I know that Creo can do this by creating layers, adding parts to a layer, and then isolating the layer. This process can be very tedious and it takes many more clicks than other software (i.e. solidworks, edrawings). And if that can't be done, it would be nice if a new part that you are trying to assemble came in on the isolated layer. Currently, you have to add the new part, then add it to the layer, and then you can isolate it. Very time consuming.
If you chose to snap to a grid in drawing mode, and then go to sketch in a model, the sketcher snaps to a grid and there is no way to deselect snap to a grid while modeling. You have to open a drawing to get to the icon. Yes I know that I can customize my ribbon. I prefer not to, and it seems like this should be standard functionality.
In the move (eventually also in the stretch command) will be very helpful an option which unshares or give a new IDautomatically to modified parts. Actually for some operations takes more time to unshare parts than modify assemblies.
Many times engineers creates on the machineries assemblies which rarely changes.This can be the case of functional groups or company standard groups, commercial… etc.In many cases this kind of assemblies are not unite for bill of material reasons or for unusualmodifications.Will be helpful to give to the user the opportunity to set an assembly as “glued”, in this way it will beselected simply by a click on viewport for position and other ncommands.Program will select directly the assembly (not the partscontained) in every command by default.When needed to modify, the assembly can be unlocked again.
Example: if I start from a structure model to obtain a new one, I copy at one level and then unshareitems to modify.In this case the where 4 feets are shared, to modify heigt is needed:-Delete 3 feets of 4-unshare one of those at one level and then unshare the parts to modifyMake the modificationAnd share again the correct feet.As you can see is needed more time for the structure management than in modification.The idea is a command that gives new ID to parts.I mean something different from the one actually in Model Manager, because the new function will be:Change ID only to the objectChange ID to all the components in sessionChange ID only to the shared in an assemblyIt will have the same action of copy at first level and delete original.Will be very helpful to change the ID of parts in modification with the options:This command will save a lot of time.With the same concept can be developed an option in unshare command which could unshare all theelements with the same ID inside
Will be very helpful to allow cut faces on more than one part concurrently.
Per our corporate and industry standards, the positive Z axis points up. (We use start models that have changed the default view and annotation planes, so "Top" view shows expected orientation, rather than out-of-the-box creo default orientations.)When using "Shaded with Reflection" Shade style, in order for the reflection to appear in the expected ground plane, it is necessary to go into the options and change the setting in the "walls" pop-up menu. This change must be made every time a new model is loaded, as it is not saved. We would like to save this option permanently, for all models and all users.The setting is found in Options / Model Display / Real-time rendering settings / Walls. Default is "XZ plane (-Y)". At our site, we would like it to stay at "XY plane (+Z)".
Idea: Having a visual reference in the modeling view that shows the view's orientation in relation to the X,Y, and Z plane.It wouldn't have to be very sophisticated to be useful. This is a common feature in other packages that I'm sure users moving to Creo have become accustomed to and would also be useful to proE veterans as well.Below is a crude example:
With the implementation of the Drawing Annotation tree, it's harder than ever to find dimensions if they inadvertently get erased.Please implement a search for drawing dimensions by dimension id, or better yet restore the show/erase functionality to the Show Model Annotations utility.Having two separate interfaces for model annotations is not working and makes designers less productive.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.