Recently active
When setting a datum plane to be a geometric target the plane is always shown in the model regardless of layer or feature settings. This is new functionality per CS59979 "https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS59979&posno=1&q=59979&nav="https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS59979&posno=1&q=59979&nav= This functionality is undesirable in many circumstances.Can we have a config.pro setting to toggle this?
Currently the pattern is previewed with black dots, that do not really give you an idea of the end result.Next to that, these black dots are not always previewed at the location where the regenerated pattern ends up, giving a wrong preview.The pattern preview should provide a proper suggestion for the real end result of the pattern.Ideally you would get a fully generated (attached) preview of the pattern represented by the actual shape of the pattern members.Like is done in Creo Elements Direct: http://youtu.be/B6IvCIk2MM0Of course the pattern must not regenerate slowly during edits. If this is inevitable, the the preview glasses option may provide the solution to regenerate the pattern only once.
Ability to place symbols for burring and undercut according to ISO13715 (JIS B0051)
Ability to activate assembly, part or cross section by clicking on the item on model tree
I'm not sure how we missed this in our initial testing of Creo 2 but the Fast HLR in drawings appeared to offer a genuine speed improvement versus waiting for all the views to re-render (through 1 CPU core!). However we didn't appear to read the fine print. Apparently this is actually how it works today:"Fast HLR rely on multi-pass (3 for dim-hidden) rendering to generate HLR display. And will require these multiple passes for each view in the drawing. So if the drawing has 5 views there will be 15 draws to generate the HLR display.""Non-Fast HLR on the other hand generates a flat representation of HLR data (a new object is created which contain only the HLR lines) so redisplaying it will be much faster. This could also be seen with even a single drawing view in the drawing."The point is that this option provides benefit only when setting up the view styles the first time. It actually induces a disadvantage when tweaking drawings to conclusion (i.e. the last 20 percent that takes 80% o
For current functionality, user cannot customize menus under File in Creo Parametric, only customize the ribbon tab
For current functionality, user cannot Add or remove commands/menus into existing groups under default ribbon tabs in Creo . It is very confused for us. Hope to add this ability in next release
Preview window size is very small and narrow, not enough under below, so need move preview window in Creo File Open dialog from below to right side, just like Pro/ENGINEER Wildfire 3.0. PTC should let user use the advantage of wide screen .
It would be useful to get viewable Drawings as searchable. A PDF drawing searchable would help users to locate some text (view name, notes, part bom flag) or dimension in some heavy big format from PDF Reader (CTRL-F). The same from eDrawings. At least this feature should be available from creo elements direct Task Agent.
Automatic Creation of a “zig zag” dimension lines for broken views
In order for flexible components to catch up to a mechanism when capturing videos, please allow a number of regens to take place between frames as an option in the video capture dialog.This idea is open to everyone.
At this moment the 3D Co-pilot cannot snap to centers of elements during a relative position action.This would be an exelent feature, for 18.x & 19.x(used to work in 17.x and below)
When a Creo object is opened from PDMLink thru the embedded browser it is not automatically activated. Currently the user has to activate this window manually.Window should be activated automatically similar to when an object is opened using File > Open.
Yes, it is yet another obvious functionality that's missing from Creo. Currently the only way you offer to focus on a part is to unclick the spin center button and press on something with middle mouse button. Awkward and unwieldy is an understatement for this function. if you click just off the part or any entity, you're spinning in space, lost in universe. Why not do what has already been done for years and workes perfectly - a "look at" function. I.e. simply pick an object, press a "look at" button or hotkey combination, and program instantly zooms in on the object making it a center of your screen. Now you can spin around it all day, never in danger of clicking off it and lost in space. This is one of those things that seems small, but in reality is HUGE and would immediately improve ease of use and productivity.
Currently, to fix the placement of components in an assembly, the user has to redefine each one separately.This could be similar to the restructure functionality, where a user could collect multiple models and set their assembly constraint to fix.PTC, please allow multiple components to be fixed at once
AS1100 covers structural engineering drawings and this includes a section view arrow callout that uses the section number in the top of a balloon and the drawing sheet number in the lower half as shown in the figure below:Currently the only way to achieve this in a drawing is via a combination of custom symbols and manual edits that are not parametric if views start getting moved between sheets. It would great for companies who are using Creo who need to produce these types of drawings if support for this type of section view callout could be incorporated.
When constraining parts, two inserts will not fully constrain the part although it is shown as fully constrained.The part is yellowed as fully constrainted. The box does not say to allow assumptions. I have had parts flip on me do to them not being fully constrained.If you add an orient constraint, then the part has all its degrees of freedom constrained.Please correct by either adding allowing assumptions similar to screws or by not showing it as fully constrained.Thanks, DaleEdited - 11/14 @1:50pmWithout the align, there are three other options that meet the same criteria for the two insert mates. The "flipping" isn't garaunteed to not happen after you have saved and reopened. I have see that with other files.Option #1Option #2Option #3Thanks again.Edited 05/05/14I have also noted since this was first requested that the second insert defaults to oriented versus coincident even if the two inserts are perpendicular like the tube and the bolt hole in the tube. It, the software, must be
If an assembly contains parts with a resolution 1e-2 or less or a part is corrupt the view update in Annotation ends with a signal error.If the assembly contains only a few parts it is easy to check, what part results the problem.If an assembly contains 100.000 parts or more you have to spend a lot of time to find the reason.So it is important to get info about the reason. Otherwise the problem costs time and money to the customer.
Add the ability of creating Hole Tables for assembly drawings, regarding part holes.
Add info about latest version of Creo on welcome webpage wich you see when you start Creo (with download link preferably).Don`t force users to check for new versions. Respect their laziness
Lights in 2D shaded views are orientated too much in front of the object.Same orientation as 3D or customized 2D orientation would be useful.
Delete interference between the threadings and the tapping, when we use the tool: global interferencefor example: screw / nut
Referring to https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS39780 Only compare the file size, it is very difficult to find top level assembly file, sometimes, the file size of sub-assembly file is larger than top level assembly file.
Referring to https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS46137, creo 2.0 import supports ACIS (*.sat) only up to R14
We can show model annotations more easy
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.