Recently active
We often use large deformations analysis but it isn't possible to use it with midsurface.
Ability to Begin the Analysis’s Name by a Number.
Estimation of the total calculation time.
This function cannot be used with large deformation analysis.
Ability to see the changes in the model in an optimization design study as well as in a sensitivity design study.
Be able to simulate parts which comes into contact with itself during the deformation.
Currently in Pro/Mechanica, the direct VRML of the deformation is exported in order to be able to import it in standard mode. This is very limiting because with each modification it is necessary to start over.It could be interesting to have this function associative :
When Model Player is performed on an assembly including Pro/Cabling parts, the cabling part will me marked as modified despite that no modification has been done to the part.This behavior is known by PTC and several cases has been filed regarding this issue during the past years, i.e C10462913.PTC refers to TAN 114464 and explains as follows:"Based on R&D feedback in Wildfire they have added a few feature typesthat they can check after regeneration to see if they have caused anydatabase changes. These feature types include most datum features (datumplanes, points, csys, and curves) and component features. For all other features, if the feature regenerates they have to assumethat the database has changed and mark the model as modified."and"From R&D answer when a Regeneration is forced they estimate thatpotentially the model is changed. After for some feature types (most datum features (datum planes, points,csys, and curves) and common ones) they added some mechanism to checkafte
It is not currently possible to represent a variable ratio gear in mechanism. This is needed for defining motion of a continuously variable transmission (CVT). The functionality could be integrated into the gear definition by specifying a parameter which would be varied throughout a motion analysis. As an added enhancement for other non-static meshes, the gear ratio could be a user defined ratio with respect to angular position of one gear.
After hitting OK when creating detail and section views, Annotation prompts you to position the view on the drawing. But at that point you are locked out from any changes in the view, so if you are zoomed in on a view, you have to place the new view on top of the existing view and then move it later.
Ablility to hide ALL pattern members by right clicking pattern feature and selecting hide.Curently not posible unles pattern is put in group first or hiding each pattern member individualy.
When you try to move a part that is inside a locked/reserved assembly, instead of saying ‘“Part1” is read-only and cannot be modified.’ (which is not necessarily true, and is very mis-leading) how about ‘Part1 is in a locked assembly, how would you like to proceed?’ then offer buttons that offer ‘Reserve Assy1 and continue’, ‘Set Modify Assy1 and continue', and ‘Cancel’. When you are in Modeling, and load a drawing from Manager, don’t just warn that ‘Loading a drawing will destroy your current drawing. Please confirm to continue’ but also show a view of the drawing that is about to be destroyed. It would also be handy to show the Drawing tab of the Drawing Browser to see if the drawing has already been saved or not. You might even offer to save the current drawing. When you go to save a drawing in Annotator and there are unsaved changes to the model, don’t just warn ‘Possible data loss and 2d-3d link problems. To retain the associativity, save the 3D model also.’, you can
In shaded views in a drawing, the offset lines are not hidden. This is not correct.For a hidden line view it's OK.See the image below. Thanks
When you have a circular bolt pattern, a circular axis can be displayed for the bolt pattern. Change it so instead of having to pick each axis of each hole in the bolt pattern, you can simply pick the circle.
In this current age, would should be able to types our filenames AS WE WANT THEM. Not all lowercase. Making them uppercase would be better than lowercase, but having them WYSIWYG shouldn't be an issue with the computer technology out today.
The dialogue window has not been changed for about twenty years, which is very Unfriendly, no any explanation information except file type. Please learn inspiration from other software
Please update Pro/Composite so we can have all of our design information in the same software package.Pro/Composite seemed to be approaching a mature product, but still needed some work to be a serious contender in the composites world. It addressed the complex issues of composites such as sequences, plys, cores, combining disparate solids into one object while still preserving the correct mass properties; something that can't be done with merge in Creo.
The current selection ability is not enough and effective.Enhance object selection ability , for example base on the same color
If user can use boundary edge to create extrude and revolve feature directly, it wil be more convenient.
For current functionality, it's very difficut to improve the quality of three edge surface
When you pattern something that chooses the "reference" pattern option, you cannot then pattern that pattern.You can pattern a pattern if anything other than "reference" is chosen. Please make this standard for all pattern types
For current functionality, unable to resize the datum plane, axis and coordinate system tags. The tags are very small and even the color of coordinate system X,Y,Z axis is the same, which is very difficult to differentiate them.
When users change Creo Windows in Windows TaskBar they always need to activate there windows in order to work on it.Somethimes changes doesn't work.Suppression these Activate Feature which need more and more clics and stabilise the navigation beetween windows.Solidworks have a beautiful Windows mozaic for an easy navigation beetween open models.
When a weld symbol becomes dettached, allow reattaching by right clicking on the weld symbol and use edit attachment versus having to right click and go to properties for the weld symbol, click on the box for attachment and then re clicking the attachment point/points.Using the edit attachment by right clicking on the symbol dirrectly distorts the weld symbol.Or if the preffered method is opening the symbol pallet, when you click on edit attachment for the weld symbol, it should open the symbol pallet instead of trying to let you directly edit the attachment and then fail.2014-09-03Or since editing the attachments isn't directly possible, it should be greyed out forcing you to go to the properties box.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.