Recently active
The screen shot below is from a round feature, but it would be nice to have this feature for sketch references where there are missing references. This way you would not have to select all of the missing ones one by one.
When in a drawing, in the lower left corner it displays the active model. When clicking on it, it expands to show all attached models. The entire model name cannot be seen, and when you grab the edge of the window to expand it, it will NOT expand. Previous versions of ProE it would expand, and it seems to have gotten lost. It would be ideal however, that when popping open that window, it automatically expands to see the full name of each model name.
At the moment you can switch a model from shadow with edges or without edges. If you work with two models, one a "normal" part and the other a imported stl file model=> both inserted into an assembly it is difficult to see something. Suggestion would be, to make the display situation differnt and dependent from the modell stored. So the stl could be shown in display without edges and "normal" model display with edges. You always have to switch view situation if you change between the two models. In Creo 2 you can define in *.asm in view manager a style where stl is shown without edges and other with edges. But this is ignored and does not work...
Actualy the only possibility to display assembly componants in different positions in a X-Section of a drawing is to create a family table.Heavy and not the best practice with Windchill.... It should be very nice to have the possibility in a simplify representation to manage this. Why not using the PTC_CONSTRAINT_SET that is today possible in family table or flexible components. Example on a hand of a watch: need a 10H and a 12H position.
It would be interesting to have the possibility during a dynamic analysis of Mechanism to be able to define one or more components as flexible. At this point a 360 frame analysis would become an analysis with 360 associated FEM analyses that the software should solve. Obviously, the solution times would be longer, but in some cases the deformability of the components is not negligible during the motion (for example in the dimensioning of the suspension arms of a SUV).
Currently Solid tools can only be accessed in the Top-level “Tool-Library” folder. If a shop has 10’s or 100’s of tools then having all these tools in one folder can be pretty confusing. Additionally, the cutting data ( .xml) file can be stored in organized folders, but the Solid tools cannot be located in the same folders as their respective data.xml file. It would help tool organization dramatically if both the .prt file and the .xml file can be located in the same organized folders.
I would like to see the ModelCheck condition.mcc file offer a conditional statement that if a parameter does not exist then run certain modelcheck files. I was just told by PTC support that this feature does not exist. I would like to see this added to ModelCheck.
With PTC Creo Parametric, when you calculate 3D Thickness (Thickness functionfrom Analysis tab) to identify the areas on a model with critical thickness issues, the results displayed doesn't allow to see internal critical thickness issues with a lot of intersecting holes. Please add a transparency on surface functionality in one of the next Creo releases. Proposal:
When dragging a sketch entity which is defined by a strong dimension the dimension will not change in increments defined by default_dec_places in Creo Parametric 4.0 https://www.ptc.com/en/support/article?n=CS276084
If a table pattern is used for modeling, the dimensions cannot be displayed in a drawing.This means that there is no possibility to use the parametrics in the drawing. One of the main advantages, the modification of a model via the drawing is therefore simply not feasible.It must therefore be possible to display all dimensions from table patterns in drawings. Below is an example with such a table pattern. The dimensions that cannot be displayed are entered in the drawing and marked with "???". The second picture shows the table with the entered values.
Dimensions should snap to references during creation similar to how they snap when moving them after creation. (centered, other dimensions, snap lines, etc.)
As the menu manager slowly fades away and is removed from the primary functions of Creo, I'd like to see an improved UI on the Fix index function. More than just a carbon copy of the existing functions I'd like to see something a little more user friendly and dynamic. Thoughts: Fix Index really fixes each index value (gaps from deleted items remain gaps unless released) A way for it to handle deleted items, many companies still have the practice of reserving deleted item find numbers, and show them. Some still require an entry that says "Deleted" with the find number. Drag and drop table entries in order? (In addition to fix index and then entering a number) Side topics but also important surrounding the indexing: A way to deal with substitues/alternates A way to deal with "As Required" without "hacking" the table See also: Fix 'Fix Index'
In the attached video you can see that the speed when dragging the upper sub-assembly down affects the display of the lower sub-assembly via the CAM interfaces. Also when the upper sub-assembly is dragged back up the springs defined in the lower sub-assembly have no forces applied to make the assembly display like it would in real life. Please improve the function/performance of mechanism during drag mode. Reference PTC Case#13947611. (view in My Videos)
Hi, Our customer need to highlight a specific offset section line (including the arrows and the text) in a drawing. Unfortunately it´s not possible to change the color of an offset section line. See attached picture....
Hello, i have creo 4.0 and upon the multiple things i find annoying with creo in general, the biggest problem i have is mirroring multiple components in an assembly. creo does not allow me to select mulitple components to mirror about a plane forcing me to spend an insane amounts of time on things that should literally take seconds. Any other program i have used allows multiple components to be morrored so i think it would be a definite upgrade to this program. If i had a choice i would surely be using inventor but i don't have that choice and i am sure there are plenty of others in the same situation. Also another big add on would be to have creo allow a repeat command, for example, lets say i just constrained a part and i want to bring the same part into the assembly again and constrain this part again. I would make it so i can just hit the enter key on my keyboard or something simple like that to repeat a previous command.
To add an option to Creo Parametric for linear_tol_0_ and allow it to be set in the model using the same on-screen and config.pro options that are currently available for 1,2,&3 decimal places.
Allow for more than one hole to be created per hole feature. This is standard in all other 3D programs.
Allow for clicking of dimensions to create relations. For example, when editing a dimension, to create a simple relation, type in the dimension box "=((click to select dim)*2)/(click to select another dimension).
Hi All! to all people who are puting the renderings of the different materials on PlanetPTC: it would be great if you would also load material (.mat) files with mechanical properties of them. So we can create matweb kind of DB for use in proe
After adding a chamfer to a revolved wall with a shape of a cone, it's not possible to unbend or bend back this wall afterwards, while if the shape is a cylinder instead, this works just fine. The SPR 962955 refers to this problem, and it was created in 2002 (version 2001).It hasn't been resolved yet.
Solidworks manages to do this....would love to see it in Creo.
Ever since Rasna wrote Mechanica about 20 years ago, it has only been possible to plot 1 measure per graph in Mechanica results. I think it is about time this changed and it was possible to plot multiple measures in a Mechanica results graph, instead of having to go through the painful process of creating them one by one and exporting each one into Excel and then cutting and pasting them all into one Excel spreadsheet and then graphing them in Excel. Clearly no PTC programmer has ever tried to run a 'real' Mechanica analysis and look at multiple measures, or it would have changed years ago
Normal to----Set view orientation Normal to the selected plane,planar face or feature These two functionalities are high used in design and available in Solidworks and other software.
I've had need of this several times and would like a native Creo/Pro assembly to have the ability to be saved as a part. I know Edit->Component->Merge can be done, but a simple Save As Copy and chose .prt would be so much simpler.
More times than not, when in an assembly, I chose a mate or align constraint and it defaults to offset with some crazy, random value. Make coincident the default.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.