Recently active
We are routinely having to figure out why some top level assembly has a "red light". the process requires us to manually unsuppress one model at a time from the top until we find out the FIRST one that is creating problems. It would be of tremendous value to have the model tree show the "light status" of each component EVEN THOUGH it is recognized that as soon as the first "bad light" is shown, everything below that point is suspect. Just the process of finding the first "bad light" AFTER EACH FIX would be tremendously helpful.
Add option "Surface rip" to Conversion
Don't know if this is in Creo 4 yet, but here goes:We will need a print setup tool that will help a user section a part for efficient 3D printing.Many printers are now soluble support based "freeform" printers. That is not the specific purpose of this (maybe something more than this)There still a huge world of filament printers that would benefit from a comprehensive build plate setup tool.I am proposing that say, a wheel, for example, needs to be split at the hub and may be lain side by side by flipping the second half and offsetting it.One might need to section a large part for fit the build platform... a print setup tool for this would be useful. I don't know if this would function in a print utility (one time profile based printer setups) or feature based like "flat pattern".Please add your own thoughts. This is one I needed this weekend, and it wasn't there (yet).
We would like to know why SPR 2831087 has not been addressed by PTC till date same problem has been faced by us &one of our componment got rejected( cost of component is around 10lakh). due to his we had failed in meeting customer delevery shedule hence PTC has to take it on priority resolve the issue. refer attachment for details. case has been raised 13506256
I propose that the fix should be issued for the peculiar behaviour where Creo Parametric does not display feature's section dimensions (and their corresponding dynamic drag "handles"). This often happens when the feature editing is initiated when the model is being viewed from an "orthographic" direction. This general behaviour makes it difficult to dynamically edit the design, and contributes to my feeling that with the Creo UI, the early stages of design process are a slow, tedious and painful experience.I will illustrate this with an example of a 1-2-3 block that is made by sketching a rectangle of width 1 and height 2 on the front plane, and then extruded 3 in the -Z direction. I annotated the block with 3 cosmetic sketches that illustrate the location of the camera during editing:If you are viewing this model in the FRONT view and initiate the edit command, then you subsequently can change all three dimensions (in fact, if in my section the two dimensions were no
In a lot of other programs if you move toolbars around the software program just auto saves the change to the layout so that when the program is restarted it looks the same as when you left it.I would suggest that a config.pro option be added so that user changes to the ui gets automatically saved to the creo_parametric_customization.ui file.I have had several users ask me why they added an icon and then it disappeared on them later on. Its only a few clicks, but they don't want to have to remember if they are saving the admin and user customizations or just the user customizations (they want just user) and the clicks and file names required to make that happen.
Currently, if a parameter is reported in a table cell, there is no way to control how it wraps except by the borders of the cell. This is problematic for tables, such as title blocks, where the title is reported but due to the size of the cell, the parameter is broken up so it wraps weirdly. PTC please allow control of the text wrap in table cells separate from the size of the cell itself.
Entsprechend Call C13508591 wünschen wir die Möglichkeit, die Reihenfolge für die "Pick From List" für den Anwender änderbar zu gestalten (zB. bei Auswahl "Geometry" die Option Vertex zuletzt und Surf zuerst anzeigen). Das erspart mühsames zeitaufwendiges Durchblättern der langen Liste bei großen Modellen (das was oft vom jeweiligen Anwender benötigt wird, sollte er zuerst anzeigen lassen können)
Hi PTC,I have some ideas egarding creo parametric software. Here are these.1) Associative sketch pattern and option to break the associativity can be incorporated in creo sketch like feature pattern. No other cad softwares except solidworks have this feature.2) Creating helical curve can be more easier in creo if there is an option call helical curve or helix is incorporated in creo part modeling.3) Creo material table can be updated with no. Materials increased.4) Conversion and getting feature list and histrory when anyone is opening igs , stp other formats and Multi cad data as part or assembly can be much simpler.5) Creo sheetmetal unbend option generally doesnot work for complex blend, sweep and swept blend sheetmetal parts. This option is still not updated in creo 3.0.6) If one tries to explode assembly parts and want to put finite value from part to part - that option in creo is not present in explode tool and edit position in Creo.7) Mechanism portion is creo is very unique and
If you open an instance, it is not added to the Recent Files list when you try to Open a model. The instance should be added, or at least the generic for that instance. Video Link : 7515
If you try and create a link between two items then it opens the Links Editor. For example, select a class and then select "Links\Traceability\Refines" it opens the Links Editor Window.When you find the item to link it just shows the item name in the right hand pane. It would be useful if there was a box showing the description of the item selected. This just helps users select the right item.
Where is the checkout status displayed in session? Nowhere?The current window banner includes the filename, Rev (including a plus sign when the file has been modified), state, (Active) but it would be great to see the checkout status in the banner as well.
We wanted to build a mapkey that automatically adds certain dimensions to a family table that met a specific criteria. We would do this by using the FIND/SEARCH tool to look for those dimensions that fit the criteria. However, family tables can only select one dimension at a time, so if the search result had more than one dimension, it would not work. It would be great if we could get all search results to be added to the varied list.
Currently you can put a workplane on a face, but the orientation (U and V-axes) are based on something to do with how the face was originally created, and that will not be obvious to users days, weeks, or months later. As a result, the orientation can seem arbitrary. There is an option in the Setting to specify that the "Up Direction be along the Z-Axis", but that still not be what is needed for every face.Add a property to a face which is the "horizontal direction". This should be something that can be set and inquired.
In Creo-Simulate one can find force/moment load in a load set and suppress. But cannot find the same suppressed force/moment load to resume.
When define a rule for a Simp Rep based upon a zone, there is currently only "In-side" or "out-side" availalbe for selection of the zone. This means that everything that intersect the boundary of the zone, will be included in the definition. But if additional criteria could be added:"Inside & intersect""Outside & Intersect"This would give the opportunity to include or exclude components that intersects with the zone boundaries, and would be consistant with what is shown in graphical window when the defined zone is displayed.
Current C3 & C4 functionality, copy the contents of a cell in a drawing table and paste it in another cell, the font and text size of the cell you are copying to is changed to default from what ever you had created it at. PTC's workaround available in C3 M100+ was to bring back the old editor through PROPERTIES and paste there so as not to modify the text formatting. Requesting an enhancement to make the EDIT/COPY/PASTE functionality exactly like Microsoft Word by including the ability to MERGE FORMATTING or KEEP SOURCE FORMATTING when performing the PASTE function.
Allow Simplified Reps to be used in Pairs Clearance Analysis. This will give more control with less effort to check clearance/inference of assembly components.
Desidererei sapere quando sarà possibile l'integrazione in oggetto senza dover passare dal "dxf" che solitamente perde diversi dati.grazieLegnani Dario
Allow to change the arrow style on multiple note leaders at one time. Many of my note leaders are attached to a PNT, this way I can control the location of leader programmatically. These leaders do not have any arrow style on them. It is time consuming to change each leader individually. Should be able to multi select the leaders and change arrow style on all selected at once.
Allow snap lines to reference a curve/sketch feature entity. This would allow me to make many references in one feature (reduce model tree features). We reuse our models over and over again, sometimes it takes longer to clean-up the drawings than it does to have model regenerated in desired state for new project. We definitely need better tools for cleaning up drawings. A line in a sketch should be just as good of a reference as an edge of solid model. Please vote this up.
Presently, both the sketch and cosmetic sketch features display their cross-hatching when shown in shaded views of drawings. I want for the cosmetic sketch feature to behave like any other geometry and for the hidden line removal to work properly. At present, the only way for this to work is to change the drawing view display properties from shaded to no-hidden.
We have ongoing issues with dealing with backwards compatibility with other parts of the company, contractors, and vendors. For example, we could not upgrade to Creo 2.0 until our downstream internal customers upgraded as they use and modify our models. You can hand over a STEP file, but that kind of makes the sharing a single direction path. If any changes come back you have to figure out what was done and re-do them in the original model. You can use Granite, but it's not always quite so easy and you're limited to only a limited number of versions that you can open. It would be nice is the same Unite Technology "wrapper" used for NX, CATIA, Solidworks, etc. files, where other CAD models can be opened and used within Creo without exporting /importing step files or other such conversions, could also be used for backwards compatibility of Creo models.That way in the future if the downstream user was still on Creo 3.0 and we were on say Creo 4.0 they would just see our model as a feature
ProToolkit may return PRO_EDGE_END_PNT object, however, there is no dedicated API to retrieve information.Please add support.Currently there is no way we can get information if PRO_EDGE_END_PNT is either "Edge End Point 0" or "Edge End Point 1" as shown in interactive Creo.
With Rev.20 it is possible in CED Drafting, to make settings for the DXF and DWG import conversions directly while open the file.Thats a realy good enhancement for the customers.But in Annotation, which is using the same translater, it is not possible.It would be very good, if there was the same configuration dialog in Drafting and in Annotation.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.