Recently active
The methods and Interfaces currently available for OLEObject would only allow users to find and query for existing OLE objects in the drawing and does not provide a way to create or insert a new one in the drawing. Currently it is not supported to create or insert a new PDF image or any OLE object in to a Creo parametric drawing through Toolkit API customization.
A very practical way to search for Solid Models (Components) inside an assemblyis to use the 'Search tool' and choose the 'SIZE' Rule.All components matching the criteria definition are found automatically .But what happens when Solid Models have 'Far / Off Body' Datums (Points, Curves, Planes)that extend beyond the real SIZE of the spatial circumference of the Solid Model?In these cases, The Search Tool finds irrelevant Models, as it looks for the TOTAL Size of a Solid Model,NOT ignoring the datums...It would be most recommended to add an option to ignore/disregard Datums while using the 'SIZE' Rule!Regards!
If I work with different models in seperate windows in Creo and I close the active window, Creo should active the window witch was active before.
For measure distance with projection, display the x,y and z projections in n 3 different colors as it was in Pro/ Wildfire 4
Hello,if someone open a part and mark a KE in the model tree, then should open directly edit definitions.Right click on the right mouse button, select the command and confirm with OK again.This is 3 mouse clicks, although you might only want to see the settings.It would therefore be very helpful if the corresponding menu opens directly.mark a KE -> Edit Definition opensmark a embed sketches of a KE -> Sketcher opensWhat do you mean? I think, this could be so much more effective!Thank you ...
Hello,Standard parts should not be cut, so it would be very effective if you could set this option as an option in the model properties.Optionally it would also be great if hatching could be deposited.Thank you...
Today the tangent constraint applied on a cylinder or hole surface is not part of Creo Parametric Functionality. The workaround provided below is the current and only solution. https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS40703
When using ruled layers, datums, axis, points, etc. are added to layers as they are made and disappear from view. This can be frustrating when working in a large model where unhiding a layer can show too many items making it difficult to select the one needed.An option to show an item, temporarily overriding the layer state, would be very helpful. This could be an option to "Show" in the right click menu that would reset with "Unshow" and would be reset the next time the model is opened.I know I can either remove the item from the layer or use "Exclude... in the layer properties dialog box. However, this takes more time and does not reset at the next open.
This issue is related to User defined symbols. In cases where the parts are received from a third party, the user defined symbol definition does not exist on disk, but the ProE model seems to have stored this internally as the symbol is displayed correctly. We are able to read the name and path of symbol using ‘ProDtlsymdefdata’ APIs but unable to read the definition (stroke information) of the symbol. We need PRO/TK API to read the definition (stroke information) of symbol. This is also relevant to read Datum Target information.
PTC, Please add the ability to change a table row height while entering in text by adding in a right click menu option. also Add the ability to change table cells without having to un-selecting the table. You should be able to either tab cell to cell while entering in text or use a mouse pick to select the next cell to enter text into. You should not have to pick out side of the table in order to enter text in another table cell. Verified in Creo 3.0 M080 Thanks, Don Anderson
Same function as in other 3D cad, as for example Creo 3.0
In Creo, some types of fillet are implemented, e.g. Circular, Conic, C2 Continuous and D1xD2 Conic. To reduce stress of structural components still more, there have to be used bionic fillets. Today, this has to be done with separate sketches. See example (Bionic_Triangle.gif). Refer. Prof. Dr. Claus Matthek 'Secret design rules of nature' (http://www.mattheck.de/english/designrules1.jpg). Idea is to implement a additional type of fillet 'Bionic'.
PRO/E draws a connector symbol (triangular shape attached with a line segment) with label of set datum tag. We are unable to read the definition of connector symbol attached with set datum tag label. Currently there is no API to read the above mentioned information regarding set datum tag’s symbol, request support for this.
Add option to automatically regenerate instances that are in session after generic regenerates. Not all just those that are in session. When other instance are brought into session they regenerate based on the state of the generic that is in session.If instances are in session and I make changes to the generic the in session instances do NOT update unless I verify through family table or open the instance in a window and regenerate that instance manually. These are extra steps that I would like to eliminate.By doing this automatically I can switch to a in session drawing or assembly that has instance in it and see the results immediately. This will save time and potentially reduce errors because someone did not realize the instance was NOT regenerated.
Would like some functions that can be used in relations or program to handle strings easier.UCASE() or UPPERCASE() or UPPER() Converts all letters in a text string to uppercase.LCASE() or LOWERCASE() or LOWER() Converts all letters in a text string to lowercase.PCASE() or PROPERCASE() or PROPER() Converts a text string to proper case; the first letter in each word in uppercase, and all other letters to lowercase.Maybe a method to compare strings ignoring the case of the strings.This way when you write equation to compare strings you can reduce the number of variables.Expand available functions within relations.
If I export a model with color and re-import it back in, I get extra layers, like COLOR#. I've also seen other scenarios, like getting __SHELL, etc. If I exported a model without these layers and immediately re-import, I should not get extra layers. Please improve this process.Thank you!
It will be very useful to have the same functionnality when we put a 3D symbol like 3D annotation3d Symbol :3D Annotation :With the annotation mode it's very easy to move, modifiy size or rotate :
It will be very useful to show the name of a combined state in a 3D annotationWe can imagine a system parameter like that : &active_combined_state_nameThe user will add a note on each combined state and he obtain fastly and graphicly the name of each combined state
to customize the creo simulation result window as per the attached PPT
Create a function or an element tree for "Insert Fitting", "Group Fitting", and "Free Fitting" in the Piping Module.
In Pro/Toolkit, related to the piping application, an element tree exists for pipe "To Point", but it does not exist for "Set Start" features. Please create an element tree for "set Start", and "Extend".
Packages such as solidworks and NX have a 'gusset' command in the sheetmetal environment. This is very useful for creating stiffening ribs across bends. The current way of doing this in Creo is by using forms which is very time consuming and the results are not easy to obtain. I would highly suggest incorporating this feature into a future build.Apologies if this ends up in the wrong place.See below a couple of examples from other software.Nx CAD sheet metal Tool Tutorial 17 (PUNCH - GUSSET) - YouTubeSheet Metal Gussets 2 Minute Tuesday - What's New In SolidWorks 2014 by Cimquest - YouTube
When you connect Modeling or Drafting with the Workgroup Manager to a Windchill server, it would be useful if you could inquire the connected Windchill server using a LISP command (in Modeling) or macro code (in Drafting.Preferrably, I need to know the connection string e.g. https://windchillserver:12345/WindchillThis can be useful to e.g. warn the user that he is connected to a testserver, and not to the production server.Or to write custom interfacing of course.
Hello,Currently there is a limitations for LDA (Large deformation static analysis). The requirements and limitations in Creo Simulate are 3D, 2D plane stress, and/or 2D plane strain model but not 2D axisymmetric! It would definetly be a great idea to include LDA for 2D axisymmetric analyses since it would decrese the run time substantially.BrAhmad Al-Kerdiazke@novonordisk.comor-
Having emissive materials in Photolux like Keyshot would be very helpful for simulating lit objects. Currently, this is approximated by placing a light inside a transparent part, but the results are terrible. The light location is hard to place and the size is fixed. If I want to simulate a lit LED headlight or turn signal it doesn't work. Even a simple flashlight looks bad.I realize Creo isn't a photometric simulator, but much of the physics is already in there. Just create a user interface to let us use it. Keyshot does an excellent job of simulating in-scene lighting. If you could add a few of those features, I'd be happy.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.