Recently active
I would like to have a config option that let me decide if drawing formats with same name should be updated to latest iteration automatic, when drawing is opened in Creo. Today one need to switch manually. If a bigger change has happened and I do not want the drawing format to be automatic switched I can then just create a new name for the drawing formats to be used for new drawings. But sometimes when the modification is little I may want the drawing formats to get updated.
PTC : Fix it in a future release
Hi,often it's helpful to get an merged step of an assembly that doesn't contain all the single files.The workaroud with merging the files manually in creo or with Export_step/Import_as_part/Export_step is not so easy to handle.regards, Matthias
When is PTC going to fix the file importation problem? I've been using pro-e since 1998 and the #1 complaint I have is i can't get files to read in as solids. And now they have screwed up the data doctor so bad fixing models is almost impossible.So i have this project that is drawn on solidedge and the files are a freaking mess when i import them with .stp or .x_t....forget .igs that translation method is completely and totally useless with pro-e and always has been. Well it turns out that Creo can read in native solidedge files (I had to upgrade to build m110....more unpaid hours added to the project).......NOT, the files are still a complete mess and worthless.The only way i can get a decent file is to read the file into my old solidworks 2004 (and lets face facts here, solidworks blows PTC out of the water on file importation. It's sucess rate for reading in solids is 99% and that 1% gets fixed by just saying "fix the problem"....this portion of solidworks makes PTC Creo look like a
Currently there are 2 ways to make a mirror part: geometry only or geometry with features. If you use geometry only, then the mirror part changes automatically when the original part changes but patterned holes are not recognized for patterning screws,etc in the mirror part. If you use geometry with features when making the mirror part then the patterned holes are recognized for patterning screws in the mirrored part but the mirror part will not update when you change the original part. This forces you to manually maintain both the original and the mirror part to make sure that they are always true mirrors of each other. We would like to have the the mirrored part update automatically when the original part is changed but also have the ability to recognize patterns for placing screws, etc.
The Belt feature as of Creo 3.0 M090 does not calculate belt tension cause by applied torque, and therefore does not contribute to the reaction force of either of the belt connections. This leads to incorrect reaction measures.An example would be a bicycle chain, which can be modeled as a belt with high stiffness. When torque is applied to the drive sprocket/pulley, it produces tension in the chain/belt which produces both a torque and a radial reaction force in the driven sprocket/pulley. It would be great if this reaction force was computed, but currently it is simply ignored.In these screenshots you can see a ramp torque being applied to one pulley, while the other pulley is constrained with a servo motor at constant speed. The measured belt tension, however, is constant. This is wrong, as tension should be increasing as torque is increased.If anyone knows how to make this measurement work, please let me know.
Hello everyone,This idea concerns the style state in combined states in 3D mode.I think it would be useful if differents display are possible in several combined states.Thanks, best regards.
Hello everyone,This idea concerns the definition of a default annotation plane by combined state.I think it would be useful to define a default annotation plane in combined state and make them changed when switching combined views.Thanks, best regards.
Hello everyone,This idea concerns the creation of different types of views in 3D annotations as drawing mode.I think it would be useful to create different types of views (general, detailed, etc ...) as drawing mode in 3D annotations and combined states.Thanks, best regards.
Need an ehancement around normalized modal stress in PTC/Simulate. By default in PTC/Simulate doing a modal analysis, displacement map is normalized in dispaclement and stress map in normalized in mass. This is not coherent. We need from PTC an enhancement around this topic. Today it is very confusing if we want to ckeck the modal stress distribution on a sub-assembly studied. What is asked : Defaut modal normalization in displacement then stress has to follows also this normalization. In option with mass normalization, stress also has to follows mass normalization.
In drawing, I would like to display the entities of threaded hole in hidden line by selecting all entities of the hole on a view that the display status is without hidden line! Todays the cosmetic thread are not display !!
When a feature fails, it is not always that the feature is at fault.It appears that often, Creo Parametric is not trying hard enough.I propose an option for the system to check if the failure remains with iterations of accuracy.It can be a dialog that request permission.It would regenerate the model at a different accuracy level and incorporate the feature.If the new feature still fails, it resets and tries the other direction.The number of iterations and step size could be part of the dialog.Accuracy is simply a place no one looks to solve an issue....and they shouldn't have to.We need more diagnostic tools to resolve failed feature during the command in progress, not after.
Please see attched Word file for detailed information.
CHECK_3D_GEO_MODIFY is a function that has no effect when inserted in a macro. I propose to have an option to make it works when inserted in a macro.The only workaround I found is to store in a temporary directory, DELETE ALL CONFIRM, and then re-load the drawing.
PTC currently offers a preference that will automatically lock objects that are added during the "add to workspace" function. I'm looking to have the preference set so that when opening a specific rep of an assembly in Creo, the objects added that are "required" come into the workspace with a lock.
Original question: Is there a way to save the "Review Total Load" in simulate as a feature and/or analysis like the measurement operations?PTC current answer: no, create new product idea.Background:I'm creating relatively complex force balance simulations with pressures and forces and its a lot of work repeating these steps multiple times:Adjust loadings (mixture of loads and pressure load), selecting "Review Total Load", selecting all loads in multiple parts, selecting an alternative coordinate system, selecting evaluation point, select compute.With these results I then adjust some loads (or the load orientation) and can do all of the above all over again (iterative loop) until I have the required balance in force.....Would be extremely nice to capture these steps in a simulation measurement feature "Review Total Load", creating also the possibility to use the results of the "Review Total Load" in a study.
Aktuell wird die Clash Analysis nach 1.000 Teilen automatisch unterbrochen. Dieser Wert sollte in den Clash Analysis Settings frei wählbar sein, ohne Begrenzung nach oben. Das Problem: Beispielsweise im STEP-Format importierte Teile sind dumm. Eine Erkennung von Gewindekollisionen ist nicht möglich. Bereits kleine Baugruppen können dann über weit mehr als 1.000 Kollisionen verfügen. Das Limit 1.000 ist viel zu gering und stammt vermutlich aus einer Zeit, als die Rechner noch langsam und der Arbeitsspeicher sehr begrenzt war. Es wäre zweckmäßig, dieses Limit aufzuheben und es dem Anwender zu überlassen, in den Settings einen individuellen Wert zu setzen.
In Annotation, create a view that is the projection of a face/inclined surface. The view should be the true size of the projected face and oriented 90 degrees from that face.
Please create a function for ProConnectorDesignationGet() (and the equivalent wfcConnector::GetDesignation() function in OTK) to get the actual Reference Designation applied to the connector.
In several versions of the Modeling you have installed, when you change a different license server, the license server name is changed correctly, but InstallShield Wizard will open again, the license server name is the last installed version's sever name.Since the display has caused an mismatch, to request an enhancement.
Hello,PTC releases Creo 4.0 soon, but there are still the old menue manager in some manufacturing cycles: four axis area turning, pocket milling, surface milling ... Why? The old menue manager is too complicated to use. RegardsErik Jose Coronado
We do a lot of radial pulls on molded parts and we end up making multiple curves to control the section. It would be nice to be able to just make the spine curve and then assign a section and have the ability to add draft as it sweeps along the spine.
This would eliminate finding the input box and selecting it.
I hope it's possible to define Objects as a folder including all target files for Creo Distributed Batch, then users could include the folder in the dxc file and run the Creo Distributed Batch tool in command, so that all the part files in the folder will be loaded automatically. Usually the files in the specific folder keep changing, it's not convenient for users to load the files again when there're any updates.
Currently, in a product based definition model, if a user applies a cross section, any annotations that extend beyond the clipping plane are removed.This makes it impossible to use dimensions or notes to label items on the cut-away side of models.PTC, allow 3D annotations to remain visible regardless of cross-section.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.