Recently active
To be able to print from Information Window would be nice.
We typically turn off "enable model reflection onto specified room walls" and "enable shadows to be case from model onto.." by default in model settings, real-time rendering settings. Rather than having to turn these off every time, we'd like a config option to change these settings.
I want to create a note in Drawing or in 3DI insert a symbol in this noteI have to upload the symbol before
Please add the ability to place Drawing Views for Part & Assemblies with Flexibility. Adding Flexibility to Drawing View(s) to Allow Parameters and or Dimensions to be Varied will Allow for Alternate Installed State views to be placed without the need of using Family Tables in the parts or assemblies and will reduce PDM revision control issues. When you have a family of parts like nuts, bolts, or other hardware it may make sense to use family tables to control varying attributes. When dealing with a part that is hot staked or crimped in place when being install, it would be nice not to have to create a family table just to control the installed state for placing a drawing view to show the install state options. The two images below are derived using a parameter in the model tied to relations that control the shape and size of the two pins. The part made flexible after it's placed in the assembly changing the parameter to the desired state for the pins to be shown in t
Add functionality to create centerplane or centerline representations in a drawing. This is basic drafting practice that should already be available, and I have seen many posts on the internet alluding to the fact that this is not available in Creo. See support case #13272768 if possible.
Interactive Creo can specify simplified rep on assembly sub-component instance.Top Assembly + Sub-Component A (Simprep on) + Sub-Component A (No Simprep) + Sub-Component B :PTC support confirmed there is no API to retrieve simplified rep on an assembly sub-component instance.Please implement API.
As of Creo Parametric 3.0 M100, set annotation planes cannot be selected in the Current Orientation dialog box or "Move to Plane" for 3D annotations.I created a ticket with PTC and they said this functionality is not planned for Creo P3 or Creo P4.PTC, please allow the selection of set annotation planes as references for Current Annotation and Move to Plane.
Currently, there are some restictions when working with 3D weld symbols and displaying them in drawings:The section highlighted shows one of the restrictions that I would propose be enhanced. This is because this restriction can cause a user to inadvertantly modify the weld symbol in such a way that the symbol is not showing correctly on a drawing.For example: Here is a weld assembly with a weld feature (symbol is correct) and rounds created at the back (to help distinguish between back and front in drawings)When creating a drawing and placing the front view, the symbol is automatically placed correctly, with the fillet on the solid line):But I have the ability to move the note to the Back View using Move to View, or by deleting the note, and using Show Model Annotations to show it. In both scenarios, the result would be incorrect as the symbol does not update to show the fillet weld on the dotted line:It would be of great benefit to the user if it was possible for this note to update
There is no way to check the option "place group in currently active operation" when place a UDF by default.We only use one operation in manufacturin mode, so a config.pro option would be very helpful for us.
Since CREO 1.x Edges behind the selected surface are not shown. Unable to see the geometry behind the selected surfaceIn Creo Elements/Pro 5.0 and older releases, the edges were shown when the configuration option fasthlr is yesFor future Releases, transparency should work similar to Creo Elements/Pro 5.0.Reference: CS106063
Because of lack of functionality and/or control with Creo Simulate 3.0 software, we would like to submit a request to have a configuration setting created that would allow the user to set the number of decimal places to display for analysis results (i.e. von Mises stresses) and also the ability to set the displayed results in Scientific Notation or in Decimal format. There is an existing community support case, CS124580, that also addresses this issue and apparently the answer is that the software can't do it. There are several blogs and discussion forums out there where people are discussing the same lack of control of their analysis environment with Creo Simulate, so we are making an office request for this enhancement. We would like to know if it's possible to change the number of decimals to display for stress analysis results either through a config.pro setting or within the analysis results dialog box. For example, our engineers are not interested in knowi
Why This Function is not implemented escapes me. It is pretty annoying to have to refresh the workspace view manually after opening a model directly from windchill.[edit]: The save operation should also refresh the workspace browser view.
It would be usefull to have Appearance Gallery Manager settings in config.pro ( https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS192172 )Like Rendered SamplesYes i know, mapkey do the job
When using the function "Modify Owner" the button "Parts/Assys" must be explicitly clicked to select parts for the new owner.In almost any other function the necessary buttons are already pre-selected while using the dialog menu.So the behavior should be the same in "Modify Owner".
In the drawing mode in tables and notes the cursor is sometimes flashing in black and sometimes in white. For a dark or white background in the drawing it is sometimes very hard to see the cursor.One idea is that the cursor flashes in the complementary color of the background so it is easy to see everywhere. E.g. If I have a pink background the cursor flashes in green.Another idea would be that every user can change the color for himself in the color-settings of Creo.A work-around is to zoom in and out, so you can see the cursor again.
Copy assy and drawing for an assembly and maintain connection to the BOM and posision flags. This is not possible today, when you send the BOM to annotation you have to put out all flags again. See PTC case 13064914
With INQ_ENV 6 and INQ 301 the last created Part ID is detected. Similar it would be helpful to detect the pointer value of the last created element.
The current output of the results of AREA PROPERTY in a file and then reading and evaluating is too slow and cumbersome for many automation processes. The evaluation would have to be done differently in different localizations. A very good improvement would be an additional output specification into LTAB.
In the documentation on the ProServerMultiobjectsCheckout() function it says that the checkout (download) rules are processed based on the Windchill Workspace configuration specification. This is set in preferences either globally or by the user in Windchill.When the configuration specification is set to AS_STORED and there is only one ASSEMBLY model passed to the function one would expect the as-stored configuration of the components to be returned to the workspace the same as it does when the Windchill browser does. This is not the case. The function returns only the latest configuration.A case was filed with PTC and the resolution was that this is how the function works. It will not return an as-stored configuration. The SPR is going to change the documentation rather than change the function.This request is to have the ProServerMultiobjectsCheckout() function repaired so that it performs as described in the documentation. It should honor the configuration of the system or the check
We have a common use-case scenario:Search for a part in WindChill from within the Creo browser or search paneOpen model from WindChill into CreoStart Modifying the model and Checkout from CreoWork on it all dayCome back the next day and it is not in the Recent Files list!According to PTC, the current functionality for Recent Files does not include those opened from WindChill. This seems more like an oversight than 'not functionality'. Anyway, my only hope now is that this product idea helps convince them to accommodate for this common use-case scenario.
Hello,I'd like to have an option in Creo 2.0 M140 to open a model directly from a drawing view. There's a possibility to display a model in a drawing view, but if you select a model in a view and use RMB then you can only select Show Model Annotation or Set/Add Drawing Model.At least it would be really helpful to show a selected model in Model Tree (the same functionality as in Assembly environment). Then you can easily identify which model is used.Thank you.Tomas
When we start Moduleworks, automaticaly the plugin set chord height & angle control for generating the stl of reference model and workpiece.It could be very usefull if user could control these two values .Indeed it willprevent user receiving error message like "Could not tessellate reference model "give a solution for using the compare tool (if reference model is not tessellate, the compare tool is not working)
It is not possible to change of the direction using ProAsmcompconstraintOffsetSet(). As a workaround, setting the required value for the PRO_E_DTMPLN_CONSTR_REF_ANGLE in the element tree is needed. Plase create API to flip the direction of angle. PLease refer PTC Case C12963985 for more information. Thanks, Suresh
same as Idea Support 3MF standard (new 3D printing standard) but for Creo Parametric. Since its founding, this format has received support from more and more vendors from various industries, so it seems this is really going to be an important file format....
We need a Toolkit-option, around in the embeded browser in Creo an empty Tab produce. Today always the current Tabs is overwritten, the display of the Windchill Workspace and an other Tab is not in parallel possible. Currently this function is available only in the internal Toolkit.Currently there is only this functionality in order to produce an empty Tab in the navigation system range. see Case C13277770 folgende internal Toolkit Funktionen gibt es ( definiert internal_tk/includes/ProHelpBrowser.h) 12 /******************************************************************************/ 13 14 extern ProError ProLaunchEditHyperlinkDlg (ProPath url_path, ProPath scr_tip ); 15 /* 16 ProLaunchEditHyperlinkDlg 17 18 Purpose: 19 Dis
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.