Recently active
Motion skeletons to have motion propagated between multiple assembled instances of the same motion skeleton within an assembly.Not currently possible in Creo Parametric 2.
We make "gears" with very different shapes on the male teeth. And getting the proper female profile in the opposite gear is very time consuming. currently I have to pattern a high density of datum points along the male tooth, and use trace curves for all those points onto the female. The spline through curves, then remove. It would be great, if you could just select the driving or merging part (male) and the part to remove interference from (female) and select the analysis and it simply removed material wherever it touched! One step further would be to be able to specify a clearance value between the 2 parts. Once I had a single female profile, I could pattern that around for a complete gear. Thanks! Steve C
When I am in sketcher and have a bunch of dimensions I want to change every time I change a dimension it recenters. How about just changing dimensions without recentering every time. This would streamline my modeling time.
I've seen this listed elsewhere, but I can't find an enhancement request on it.There should be a config or display option to display overridden dimensions in a separate color and possibly line width. It probably needs a mechanism to turn off that functionality when printing or saving to PDF.Sure, Modelcheck is easily set up to identify these dimensions, but users will ignore it. If they have a bright green dimension that is double the standard line-width, they may pay a little more attention...or their boss might.
Please allow more attributes to be displayed in the Creo View Model Tree structure. Much like it is in Creo/Parametric and Windchill, i.e. ability to add columns of attributes. Having attributes as columns bring relevant information forward. Current functionality only allows for 2 attributes. Those are typically taken up by Number and Name. Please, don't suggest this is solved by Tooltips. Tooltip only displays the attributes for one item at a time, e.g. when scrolling over it. More often (and in every case) we like to see the bigger picture where we can process more data in one view. Also have the attributes in formatted columns, and not strings of information. It's more easily scanned with consistent format. Also this would be consistent with Creo/Parametric and Windchill.
implement parameter tool_position_angle for thread turning. The parameter tool_position_angle was implemented for a customer for area turning, groove turning and profile turning but not for thread turning.see case PTC Case C12791083
When select the placement surface in HOLE creation, the selected surface is highlight with highlight color. The system color can not set to Transparency. So, it is difficult to judge the position of the hole. I would like to decide the hole positon while seeing the back side of the hole.
Horizontal Center Leader dimension take extra space. And it is different direction from next dimension.
Currently "Minimize the Ribbon" work ALL or Nothing. We would like to use sometime but do not want to use in SKETCHER, etc.
We expect Printing Line Thickness is always relative and want to control only Pentabel(.pnt). For the Reduced Printing, Printing Line Thickness is determined by Drawing Size, Pentable(.pnt), Paper Size in Print Configulation Menu and Printer Setting.Want to avoid the usage of many number of PCF.
Currently, we need to delete Pattern, when we want to switch Simple Hole to Standard Hole or Standard Hole to Simple Hole.
When we create Vertical Balloon Note with multi line, the order become upsard. It is different from Balloon Property. We would like to show the same order.
Currently it is not possible to Change Reference for Draft Datum. We would like to change reference same as Leader Note.
Currently it is not possible to use Datum Plane of 3D model for Snapping References of drawing Sketch. We would like to use Datum Plane.
Currently it is not possible to use Center Line and Solid Edge of Solid Pipe Part for the reference of Auxiliary View's direction. We would like to use Solid Pipe Part for it.
I often work on very large models with many features. They are often created by other team members and can have questionable modeling techniques. So when I select a feature from the model tree for suppression and the message window pops-up informing me that the "Highlighted features will be SUPPRESSED. Please confirm." I always have to worry what dependent children were automatically selected for me. This means searching the model tree for the other features that were "software" selected or visually scanning the graphic window for unintended feature highlights. Both can be prone to error. The worst part is you could be looking for nothing if the original selection has no dependent children. Even when there is a single item in the collector, the message is still plural, as in "features". I'm never really confident that the software isn't doing something I don't intend.So I'd like to make this an improvement request:Please make the pop-up msg box have
Creo 2.0 - Offset Lines in exploded viewI've been doing explodes for many years and I have always wondered why?Why isn't there a "Redefine" option for an offset line that was working fine but is now broken because of a replaced component? I find the only choice here is to delete the old broken offset line and recreate it even if only one of the end attachment definitions is invalid.Why isn't there a "Pattern" option when creating offset lines - even if the only pattern type available is "Reference"? I often have a reference pattern of fasteners assembled to a pattern of holes all exploded off together. The only choice is to create each offset line individually when what I really want to do is to create the first one and pattern the rest following the reference.Why is it that the only place anywhere in the software that requires you to explicitly "save" after completing a redefine (soft) is at the end of an exploded view edit? Everywhere else when you complete a definition with an OK or
When a shrinkwrap is aborted, the status bar has feature regeneration failure and it takes a lot of work to find the erroneous sub assembly / part. No notification appear.
Actually is not possible to make zoom movement or change the point of view when an animation is executed: the point of view on the models is fixed. With rendering and advanced assembly is possible to create video movement but no zoom in or camera control are possible.This new functionality is important for all customer that do presentation of plant layouts and machinery and is important also for PTC VARS to best sell the module Advanced assembly.
Video Link : 6537
Want to get the possibility to set a new customised pdf profile file i.e. pdf_export.dop as default. The workaround to use mapkey for this is not sustainable for this.
Need the possibility to rename reference points with a "Properties" command in the floatting menu.Like we can do for an axis.The workaround is to use # Model Properties # Name # Change : heavy !Thanks
There should be an Option to retrieve only the simplified rep to the workspace
Give the priority to the selection of visible lines in section views.The option "select_hidden_edges_in_dwg" doesn’t work in section views. Video Link : 6548
We have written custom applications at our company using VB API. We'd like to run multiple releases of Pro/Engineer and Creo on the same machine with each of them using our custom applications. This can be done, but is a bit of a hassle.Here's the process. Pro/E WF4 needs registration of Visual Basic API COM server (pfclscom.exe) through vb_api_register.bat (<proe_loadpoint>\<datecode>\bin). When switching to run Creo 3.0 we need to first unregister Pro/E WF4 and then register Creo 3.0 using its own version of vb_api_register.bat (<creo_loadpoint>\<datecode>\Parametric\bin). Also, when going back into Pro/E, Creo gets un-registered and WF4 needs to be re-registered again. They cannot both be registered at the same time. One must first be unregistered for the other to work.I opened a call with PTC tech support asking if there is a way to have both CP3 and WF4 registered at the same time on the same machine? Here is
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.