Recently active
I put in a request several years ago to be able to perform buckling analysis for pressurized structures since that capability is THE critical analysis type for rocket structures. This new "product idea" is just a smarter explanation of that year's old request. I now understand that the way that NASTRAN (and presumeably other codes) accomplish this kind of analysis is by using a Pre-stress analysis. Fundamentally, a user inputs all of the pressure loads and runs a pre-stress analysis that "determines the effective stiffness matrix" for the structure when it is stiffened using pressure. Then, subsequent to that, the user runs a standard buckling analysis that uses the stiffeness matrix from that pre-stress analysis. Currently Creo only offers Prestress static and prestress modal. My industry badly needs prestress buckling.
In Creo Parametric sheetmetal, there is a really good feature that allows the user to identify bends and give a sequence number, that then gets created as Model Dimensions for the drawing. Unfortunately capability is not available in Creo Elements/Direct Modeling Sheet Metal, but it would be a very good addition to the module.
I would like to be able to have more control over how the tables show. Currently the size cannot be changed and it is difficult to read the tables.
Die neue Option "Besitzer transformieren" (V19 M020) sollte nicht nur eine Option beim Positionieren sein. Generell beim Auswählen wäre diese Funktion eine große Hilfe!!Als Beispiel: Beim Erstellen einer Teilegruppe fehlt diese Option. Teilegruppen könnten dadurch viel effizienter erstellt werden, des Weiteren kann man auch den Inhalt der Teilegruppe viel präziser "Selektiv eigenständig" machen...
The size of a new window that is opened from the Creo internal browser should be remembered or made somehow configurable.The current new window (here Creo 3.0 M020) is much too small.Everytime a user opens such a new window the window have to been re-sized.
When you move the gadgets in dashboard, they return in the old position every time data are refreshed (F5 button).
A row added to a table should adopt the text style and justification of each cell of the above row - enough said?
Tried to use the sweep blend command to make attached part. Trajectort at both end is straight. All sections are round and last three sections are with same diameter,But when clicking of dimensions and when checking dimension at the end it doesn't show diameter. Instead it shows arc length. PTC should need update for the issue.
When creating a drawing note in ASME environment all of the notes are 'left justified' by default except when an Auxiliary View is created on the drawing. Create a Detail View on the drawing and the view's note is 'right justified'. Why would all other notes be 'left justified' and the Aux View notes be 'right justified'? Is this done to adhere to some standard? I could not find any standard reference indicating that 'right justified' should be a default behavior.When this was brought to my attention by one of my peers I researched the topic and opened TS case 12715505 and was directed to create a product idea. TS confirmed that all other notes created in the drawing default to 'left justification' and the aux view note defaults to 'right justification'.OK Community. Your turn to vote.
When I want to do a copy/paste to copy several balloons, each time I do a copy/paste I have to select an origin point and a target point for the copy, It's time consuming! It will be great to have an option to do the copy/paste wo to have to select these information and copy it like Windows with a translation.
It would be nice to have an option for the background color of the windows (menu's, borders, and ribbon) to be darker. When working on cad for long periods of time I have found it causes eye strain when there are bright colors for the cad system. In the past, a long long time ago in a galaxy far far away.... I used to use AutoCad. I set the background to black and all the menus, and borders. Then I even had the text in the menus a grey, and everyone working in the engineering department asked me to set theirs up the same.The only brighter colors were on the model, where you need to see whats going on.My specific request would be for Creo to have those colors customizable, or at the very least, choose themes like Windows.
Ich bin Nutzer von Creo Elements Direct 3D Access. Ich arbeite im Managementbereich und nutze diese hervorragende Software vor allem als Viewer, für Präsentationen und zur Erstellung von Dokumentationen (Screenshots). Ich nutze sie NICHT zum Konstruieren. Ich komme gut damit zurecht, bis auf 3 Punkte welche mich ausnehmend stören: 1. Farben bearbeiten Ich möchte zur besseren Darstellung in Dokumentationen gerne die Farben von Teilen ändern. Dies ist leider nicht möglich. Mit dem Workaround über das Rendering-Modul ist dies zwar begrenzt möglich, aber sehr umständlich und sehr eingeschränkt. 2. Facettengenauigkeit Je nach dem wie der Ersteller des Modelles die Facettengenauigkeit eingestellt hat erscheinen runde Bauteile rund oder als Polygon. Bei niedrig eingestellter Facettengenauigkeit sind Screenshots für Dokumentationen hässlich. Ich möchte die Facettengenauigkeit einstellen können 3. Strukturliste bearbeiten Die Strukturliste kann nur sehr begrenzt bearbeitet werden. Lediglic
Beim Importieren von Catia Dateien kann es vorkommen, dass diese durch die Verwendung vom Teamcenter oder anderer Tool Dateinamen von 82-86 Zeichen enthalten. In Creo 3.0 / CreoView gibt es die Möglichkeit CATIA Daten zu Öffnen statt zu Importieren (Unite Technology). Diese Methode würde uns neue Möglichkeiten im Umgang mit Fahrzeugdaten bieten. Allerdings ist dort die Anzahl der Zeichen auf 80 begrenzt. Eine Erweiterung der Zeichenlänge würde da sehr hilfreich sein, da an sonsten die Dateien nicht angezeigt werden können. Da es verschiedenste Systeme mit verschiedenen Dateinamenslängen gibt, ist das einzige Limit, dass vorgegeben ist 256 Zeichen, welches aus dem Betriebssystem selber kommt.
There is a pdf called "PTC Creo 3.0 Parametric Configuration Options" (attached). Since I don't have all of these options, their definitions, and all possible values memorized, this pdf "glossary" is very helpful.It would be similarly helpful if PTC could produce a pdf glossary for the drawing detail options; while I realize they are less numerous, they are no less mysterious.Thank you!
Why does PTC not contact the producers of most used AV software, so that the software is included in an kind of white list?We as VAR have nearly every day one or more support cases concerning this issue.Theese cases are time consuming for us and our customers and annoying especially when the license server is blocked and the complete construction department cannot work.-----------------Warum kontaktiert PTC nicht die Hersteller der am häufigsten genutzten Antivirus Software damit die Software in eine Liste der gutartigen Programme aufgenommen werden?Wiri als Händler haben fast jeden Tag ein oder mehrere Supportfälle mit diesem Thema.Die Fälle sind oft zeitaufwändig für uns und unsere Kunden und ärgerlich wenn der Lizenzserver geblockt wird und eine ganze Konstruktionsabteilung nicht arbeiten kann.
To measure the minimum encumbrance of a model.The measure can be in absolute or in reference of a coordinate system.Please see the attached file.Thank.Fabio Simonetto
Everyone knows you call call out attributes of a part in an assembly on a drawing by using session id, i.e. &model_name:<session id>, or &<attribute>:<session id>. But this functionality doesn't work in 3D Annotations, in CAD Assembly. Current functionality will only return callouts for the top assembly.Make it so that there are the same Annotation functions in 3D as there are on 2D drawings.
Being able to communicate a laser marking on a product is important to our customers and our company. We are looking for the ability to wrap on any surface, spherical or not.A straight projection will skew the mark and will not allow us to effectively communicate what we need to our customer/manufacturer. Our current work-around is to create several sketches at various angles around the surface. This takes too much time!
We have users that deal with mm and in parts at the same time. Have an option to set both in the config file. Or have a user profile that let's user swap config.pro files on the fly.mm - kg - s:default_dec_places 3linear_tol_0.0 0linear_tol_0.00 3linear_tol_0.000 5in-lbm-s:default_dec_places 2
There are situations where Creo will automatically change input fields within SEARCH. This will lead the user to believe that the search results displayed are for the input that they specified, without realizing that it is for the changed value. This has drastic consequences. Input fields should never change. One specific example is:Searching for a dimension in an assembly will have the dimensional VALUE field in the EXPRESSION rule change unwillingly when checking/unchecking "Include submodels" checkbox.
In the adoption section gadgets there are none about users. Existing gadget about sessions is not enough because a user may open more than one session per day, but I want to know how many people use Creo every day.
I have assembly drawing and created a table to show balloons . I have then created additional views of the assembly but used reps to bank out some of the parts, I have now tried to create balloons in these new views using the master table but it will not let me do this statinginvalid view for showing BOM Balloons for the regionWhy will it not let me create the balloon as all the views are using the same master assembly in the drawing?...This does meet our needs as clearing the table removes all the existing balloons and even if we removed the table all together and created a new table to the rep view you then cannot use this table to create balloons in the other views. Therefore the only alternative is that you have to create additional tables for each view that uses its own distinct rep. Alternatively you do not use reps in the drawing only the mater assembly and then blank out the parts in each view as required.
Can we get another Machine module create just for tapered threads. There isn't any means (that we know of) to create such profiles with the provided Commands Reference Manual, and we use Taper-2 and Taper-3 types a lot here... Thank you
Create a new bend relief option or allow the Obround feature to be extended to the bend edges to create a clean relief. The Obround bend relief is a popular bend relief but CREO creates a rather ugly relief and many prefer to use three extra features to create a clean relief. Current tool: Requested option:
For those of us that have to work on assemblies with failed models (placement and features).It would be nice while in the Regeneration Manager that you could Right Click on the Failed Model and Click Open.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.