Recently active
Enable the subdivision of a face in order to vary for example color.
When creating a Broken View in a Creo drawing, The break lines produced appear to sized randomly. It would be good if the size and shape of these could be controlled, may be with drag handles and/or by a physical scale.
We are able to create Stamps with SheetMetal and to add threads with PartLibrary but we would like to to these 2 operations in 1 step.
Similar to track changes in Microsoft word. I realize there is a difference report. There is also a compare to picture. These are close, but not what I want.I want a report that highlights lines and words that have changed between 2 models or drawings. In the case of drawings I want it to compensate for the fact that views might have shifted a little bit. IE if I add a hole to something and move the view it shouldn't highlight the whole view, just the lines that represent the new hole feature. It should output 2 drawings with highlighted lines and words. The original and the new. The original would highlight lines and words that are no longer in the new and the new would highlight lines and words that are new.This report should be able to be saved as a PDF. Even better it would be great to be able to have a PDMLink publisher run this report at each check in or on demand to compare 2 different versions or iterations of a drawing.
Not part of the Creo Parametric functionality.Creo does not let control whether source’s part relations have to be copied to UDF and hence to be copied to target model upon UDF insertion.Would be great to have a change in the functionality
When defining especially customized stamps with dedicated geometry the identification within the selection table becomes complicatedSha-define-shop-table gives not much more opportunity than adding another text column with supporting comments.Proposal would be here to have the capability to a an image (thumbnail) per tool to make proper selection easier
If you have a model tree with paramter columns and a part dosn't has the parameter in the column you can click in the cell and an dialog for creating this parameter appears. But why the type of the new parameter is as default always "REAL" and not the type like in other parts? The default cell in the dialog should be the box for the value, then you could type the valu, then >ENTER< and ready!
Is there an option to set the hatch from the part as default?Even if is selected and applied, when you edit hatching again "use hatch from the library" is selected in stead of "Use hatch from the part"
I would like to disable the Creo native Save and Save As menu items leaving only API controls to handle IO? To be effective, disabling these controls should not be a config.pro setting otherwise the user can simple re-enable.
We use step-bending for large radii. Creating the corresponding bends with polylines (segments) is a cumbersome process. Some CAD systems feature a step-bending function (number, spacing, total angle, etc.). Request: We would like a step-bending option to be integrated into the “sheetmetal” program.Guten Tagwir setzen für grosse Radien gesteppte Biegungen ein. Diese sind per Linienzug (Segmente) mühsam zu erstellen.Einige CAD-Systeme kennen die Funktion der gesteppten Biegung. (Anzahl, Abstand, gesamter Winkel, ...)Wunsch: Möglichkeit der Erstellung von gesteppten Biegungen in sheetmetal integrieren.
I would like to requeste the following enhacment for Exploded State views in drawings: The ability to show the exploded state name for a view just as a section name can be displayed for a view and/or the availability of a parameter for the exploded state name for use in a note.
The default symbol placement type always reverts to FREE every time the custom drawing symbol dialog is opened or another symbol name is picked. I almost NEVER want a FREE symbol. Far and away the most frequently used placement type is OFFSET. I have picked OFFSET so many thousands of times it's not funny. It would be wonderful if I could control the default placement type with a config.pro option. Even better would be if Pro/E would remember what I just did with the last symbol or the last time I opened the dialog box. This minor change alone could eliminate several hundred unnecessary mouse picks a week.
I am looking for box selection metod in Part mode or Find surface command by Size.
For current functionality of V19.0, when load SolidWork Native file (*.sldprt) into Creo Elements/Direct Modeling, user cannot select/change accuracy.Please add "Accuracy Handling" option for loading SolidWork Native file (*.sldprt) in Modeling, just like load IGES file.
It will be nice to have for example in the System Colors options on Graphics item, the possibility to define a color for 3D & 2D dimensions.BRLuis
Similar to Layout and assembly component replacement it would be nice if this technique could be extended to UDF. Would like the ability to easily swap out different forms without having to delete and re-add.
Currently, the message "Material XXXX was assigned to the part" will appear whenever an instance has a different PTC_MATERIAL parameter than the generic. This is VERY problematic with hardware. Lets say the generic screw has a PTC_MATERIAL of Bronze and 40 of the instances have a PTC_MATERIAL of steel, every time any of those instances are opened the warning message will appear. This becomes very troublesome in large assemblies with many hardware components. When opening the assembly, hundreds of these messages will be displayed, hiding many of the important errors/messages that you are trying to read. This message should not be displayed in this scenario, where there is really no material change occurring in these instances. Original case number was 11867056, where these messages would appear every time there was a regeneration. The problem still persists when opening the assembly model.
Do you also have this problem:When selecting print, the preview (bugged) opens, but the ribbon does not.You have to click on the ribbon to get the right ribbon.also, the drawing is badly placed, but it is printed correct.after printing and closing, the ribbon again does not refresh.you have to click at any ribbon to go back. otherwise the rest of the ui (workspace) behaves as if freezed...(Creo 3.0 M10 upwards)anybody has the same problem and waits for PTC to solve this?They talk all about solutions and experiencing all kind of stuff, i experience alltime and allday frustration when i use this Crapduct.
When an assembly simplified rep uses a preexisting user defined rep of a lower assembly/part, the hidden associativity with the model tree no longer exists. According to R&D this is a known limitation. For example (see attached parts).top_assy_simprep.asm has a simplified rep called TEST. This simplified rep calls out a user defined rep for a part within a subassembly of this assembly. The cutout just disappears. Once this rep is active, there is a disconnect between the geometry window and the model tree. Hiding the components in the model tree does not hide the items in the geometry window and visa verse. The problem with this is if you hide the part in the geometry window, there is no easy way to unhide it in the simplified rep! The Model Tree shows it unhidden, but you can't seem to get it back! Yes, I can do VIEW>VISIBILITY>UNHIDE ALL, but I may not want everything unhidden - just that one item. The original PTC Case for this is 11879876. This seems like a HUGE oversight
Apparently, according to R&D, it is a known limitation that you can't drag a shrinkwrap feature up or down a model tree to reorder it. This is a little absurd. The original ticket number is 12077763. They say they 'may' put this in a later release of Creo3. However, to me, reordering features is a basic functionality that should be fixed if broken.
While drafting plastic parts, it would be great to use even a curved surface as a hinge for drafts. This would allow for more surfaces to be drafted at once instead of one at a time for those surfaces that share the same edges.For example, if the 'base' of this plastic part has a bubble effect and is curved a bit, all surfaces coming up from this surface can't be drafted using this bubbled surface. Instead, the hinge has to be the edges that meet the surface, which slow down the process drastically.
I'm repeatedly having issues where Reference Pattern won't work when the source pattern is directional. Either the pattern members don't rotate or translate, even though they are created. They will just stay on top of each other.See attached for 2 examples (open the assemblies for each one).Case: 12390403SPR: 2256458
When creating a sketch, Creo asks for references up front (or assumes them for you). If you do not select any or enough, you get a Missing References prompt:However, there's no reason that you cannot sketch first and then align to references later. Also, the "project" and "offset" tools don't require references ahead of time. The prompt at the start simply slows the user down.This prompt should me invoked only if the user attempts to exit the sketch without the proper references selected and not at initial sketch creation.
Publish geom features cannot be hidden - either by layer or by the hide command - and having them present makes selecting anything difficult. In fact, they are the first things in the section list. Rarely do I need to select a publish geom when working on a model, but I have to RMB toggle past them to do any work.Please let us layer them off and hide them so we can get our work done.
Create a rule to allow the filter of Graphic Rep component from Repeat Region. This will create an easy way to exclude for BOM components that are in Simp Rep just for display.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.