Recently active
Hi I design many embossings and I think brilliant new feature can be "Bump-map emboss feature" which base on grey texture (same like for bump in rendering), will add physical surface mesh deformation.It means if texture is black - the concave is "0" if it is white the deformation reach maximum pointed in the feature parameter.This figure will express the idea in cross-section and below is referenced texture image:of course it should work in UV directions, just like a bump Good reference for this idea can be rib feature:where in option user can set minimum side angle, radius value at beginning and at the top, so in this new feature Creo will calculate all - even if user prepare just white max deformation texture or parametric sketch can be source representing max deformation.Example sketch:Then result can be as follow:will be great also to be able to add rounds at corners:also be able to set the minimum width on the top:next level will be if corner rounds will be no constant, but be res
If you want to perform a measurement function you have always to tell the system first which element is to acquire. First, you have always to enter an option, only then you can select the elementsWith immediate selection of elements you get an error message.The program itself should be able to recognize which element is selected and perform in accordance with the result the measurement.
I want to change the default command of created "split menu".Now need there is to recreate the "split menu".Example
The import function "2D import to a workplane (DXF/DWG)" should have a scale function ---> like add image to workplaneDie Importfunktion " 2D in Arbeitsebene importieren (DXF/DWG)" sollte eine Skaliefunktion haben --> wie bei Bild zu Arbeitsebene
The "pull function (liniear/angular)" should have the option --> Move workplaneDie "Ziehen Funktion (Linear/Abgewinkelt) sollte folgende Option habe --> Arbeitsebene mitbewegen
Add the option "Circle Center&Diameter" to the new function of temporary constructionlinesZusätzliche Option " Kreis Mitte Radius" als zusätzliche Option bei den temporären Hilflinien in den Zeichenbefehlen
It might be possible to deaktivate the Auto Placement / Min Space for a short time --> Option on right mouse button or as button on keyboardEs sollte möglich sein den gesetzten Mindestabstand in der Automatischen Platzierung der Maße kurzzeitig zu unterdrücken --> Auf Rechter Maustaste oder per Tastenkürzel
It might be possible to create variable chamfer like blendsEs sollte variable Fasen geben ähnlich den Verrundungen
If i change the colour/linetype of a geometry/constructionline in the workplane settings it should work on the aktive workplane ---> not only on a new workplaneWenn ich die Farbe oder den Linientyp für Geometry/Hilfslinie in den Einstellungen für die Arbeitsebne ändere, dann sollte diese Einstellung direkt auf der aktiven Arbeitsebene funktionieren und nicht erst auf einer Neuen.
If i move a part or assembly in another assembly and the name already exists the part becomes a standard name.--->> To avoid a name conflict, p2 has been given the name p1 .It would be better to give the part or assembly a suffix ---> To avoid a name conflict, p2 has been given the name p2.02Beim Verschieben eines Teils oder Baugruppe in eine andere Baugruppe bekommen diese einen Standardname falls dieser schon existert.-->>Zur Vermeidung eines Namenskonfliktes wurde das Teil in T01 umbenanntDiese sollten lieber einen Suffix bekommen --> Zur Vermeidung eines Namenskonfliktes wurde das Teil in T2.02 umbenannt
When building casting models we are required to have the raw cast model and then carry it forward to a machining model. Currently, we have to read in the material file for both raw cast and machining files, but it would be nice to have an option availble to read in the material files. The default behavior should be not to carry the material file forward.
Create drawing detail option parameter for controlling cross-section arrow length. The cross-section arrow should have this length by default.
I would like to see more frames for text. At the top of my list would be a hex box, like you would see in GD&T to indicate a continuous feature. Another frame I've used would be a parallelogram.Are there other frames you feel are missing?
I wish to edit the 'Section Line' of 'View 3D' belonging to 'Dep View'.※In article CS67918:'Section Line' modifications , has been described as "Specifications".However, Ver17 ( formerly CoCreate,Inc. Ver17.0.0.42) can be modified 'Section Line'.To be able to modify the 'Section Line' as CAD.
Case: Proe linked to MDM and PDM software (Windchill). All provided by PTCThe PDM software is the reference. It manages the BOM. In this case the BOM hasn't to be anymore on the drawing to avoid to duplicate the BOM and to risk to share two BOMs with differents contents.If a designer has a legacy drawing with a BOM table and several BOM balloons, he needs to remove the BOM table but keeping the BOM balloons before to link, to publish the drawing to the PDM software.Actually, if he deletes the BOM table, all the BOM balloons are deleted. He has to place again one by one. He spends a lot of time. Wasted time...With an option in the function BOM, he could "disconnect", make independent the BOM Balloons and the BOM table. Then he will be able to delete the table and keep all the balloons. Won time
In Creo, the assembly tree (CAD product structure) is necessary the same as the file structure (.asm and .prt)Ability like in some other CAD tools (CADDS, Catia v5 ...), to define in assembly tree some logical nodes with "normal embeded features" like positionning constraints, assembly features, etc ... (ie not only a group)So being able to build an assembly tree different than the file structure (like in the second example). And being able to configure in creo Workgroupmanager if the CADoc structure is in synch with CAD File structure or CAD product structureIt is usefull , notably when using Windchill CAD integration and associated WTpart xBOMs (Design, and downstream Manufactruing or Customer Service BOMs).The CAD designer can create some assembly levels that we do not necessary want in Wtpart design BOMA special WTpart type exists for this case. which can be use to handle these "pure CAD levels assemblies" . But as they are not automatically managed in Windchill (
With Creo 3.0 standard installation isn't possible to customize the installation loadpoint.Even that we can change the installation folder, it's not possible to modify/delete Creo 3.0 folder and datecode folder.According to this article it's can be done only with silent installation.
Sometimes when a round fails, Creo will report the following:Recent changes have caused user-defined transition references to be lost.Changes to either the current feature's geometry or to some other feature have caused the references for user-defined transition (No. 1) to be lost.The affected transitions must have their references redefined.Recommended actions: Redefine the TRANSITIONS element for the failed feature, and select the Transitions indicated above for redefinition. Reselect lost references.In most cases there is no user defined transition, Creo has created one and it has failed. There is clearly a problem, but the error is wrong and not helpful.I propose:Creo should not create a failed user defined transition and ask the user to then fix it.Error messages for failed rounds be improved to better inform the user why it has failed.
We really need to enhance the hole table interface.I would propose that a graphic UI to allow any sketched hole or revolve sketch be converted to a user defined hole table.This would include creating the annotation note structure.We have UDF and we have sketch palettes. Now we need to expand the hole library capabilities.The motivation here is that there are so many threads that PTC has not coded. And diving into creating full fledged hole tables for entire hole families is not productive for everyone when it is the odd hole often used. In my case, a 1 degree angled 1/4" 80 and 100 TPI thread is often used.PS; what is this I hear that hole table can only use 3 characters in the name? !!! Who made that silly rule in the specification? I stand corrected on this.
Bitte stellen Sie in Wildfire 4 oder Creo die Symbole nach DIN EN ISO 14405-1, für Geometrietoleranzen zur Verfügung.Es fehlen z.B. die Spezifikations-Modifikationssymbole für Längenmaße.Vielen Dank!
ich habe einen Verbesserungsvorschlag fürs PTC CoCreate Modeling / Direct Modeling. Man sollte die Darstellung anaglyphisch darstellen können und mit einer entsprechenden 3D-Brille betrachten können. Das sollte eigentlich keine grosse Sache sein, da die Daten bereits in drei Dimensionen vorhanden sind. Zum Beispiel so: (für AutoCAD 2013, Inventor 2013 and Revit 2013) http://www.cadstudio.cz/en/apps/anaglyph/ Mit der neusten Software von NVIDIA funktioniert das sogar bereits bei Google-Maps im Browser und bei Legris/Parker Legris.com - gerade einschraubanschlüsse, bspt-gewinde
I Want groove when to make ThreadedHole.like the "thread bolt (groove)".
Currently ATB is supported for following platforms: CADDS 5, CATIA, CDRS, ICEM, NX, Neutral, SolidWorks, Creo Elements/Direct, or Granite-based model into Creo Parametric, but not in Creo Simulate Standalone.Porting part of this existing Creo Parametric technology to Creo Simulate Standalone would enable Simulate standalone users to proceed with design changes effectively.
When we use PCB Library Creo Elements / Direct Modeling creates always new objects. Saving the assembly Windchill doesn't recognize just saved components and duplicates them.
There are options under Tools>Sort By: Model Name and Markup/Instance Name.I would like there to be a config option to control which option to choose by default. The reason is that if you have multiple family tables, the default sort behavior is first by Generic name and then by instance name. The default sort will look like this:SR-6-32-1<SCREW_FLAT_HEAD>SR-6-32-3<SCREW_FLAT_HEAD>SR-6-32-2<SCREW_PAN_HEAD>SR-6-32-4<SCREW_PAN_HEAD>The default sort, should be:SR-6-32-1<SCREW_FLAT_HEAD>SR-6-32-2<SCREW_PAN_HEAD>SR-6-32-3<SCREW_FLAT_HEAD>SR-6-32-4<SCREW_PAN_HEAD>This can be accomplished by Tools>Sort By>Markup/Instance Name, but it doesn't have a config option.We have engineers who like to scroll and expect it to be in order, when it isn't.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.