Recently active
I am working on a CAD-CAM integration project and I want to use the Model Based Definition on Creo Parametric (drawingless). In sketch, you can create diameter dimensions on a symmetry (3 clicks, axis, side and axis) for example a revolution. I try to reproduce the same technique to create a dimension (3D annotation) in the 3D model but it doesn't work - is there another solution?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.PTC partner on behalf of a customer desingning earth moving machines ( excavators, cranes, etc.)2. What version of Creo Parametric are you currently running?Creo 7.x3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Creo Simulation Live does not provide a boundry condition describing the bolt load on a bearing4. What is the use case for your organization?Most of the parts of the machines designed are connected by bolts mounted in bearings. The boundary conditions availlable in Creo Simulation Live are not siutable to describe this special load situation.5. What business value would your suggestion represent for your organization?Bolt-Bearing connections cannot be simulated in Creo Simulation Live in a realistic manner
I am a Creo Parametric administrator for a large Aerospace company. Users can manually create a note annotation in a box for a part or assembly. Our developer is unable to programmatically create a note annotation in a box for a part or assembly because that functionality is not available in Creo Parametric toolkit.
1. Describe your environment: Large Scale Machine Design in Green technologies Industry2. What version of Creo Parametric are you currently running? 8.0 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Trying to do whathttps://www.ptc.com/en/support/article/cs220240?language=en&posno=1&q=assembly%20component%20pattern%20table%20angular&source=search says not being able to "works to specification"... then the specification is dumb, and must be updated to enable this. Not all radial arrays are equally spaced, nor are they even increments of a specific angle value ( in which case one could de-select potential pattern members). Sometimes components need to be placed at "clocking angle" locations.4. What is the use case for your organization? Designing our equipment5. What business value would your suggestion represent for your organization? No need for workaround
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Marine industry 2. What version of Creo Parametric are you currently running?5 moving to 8 soon3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Just want to add a preview button when inside flexible component dialog. see above 4. What is the use case for your organization?working with flexible zip ties and trying to size them correctly takes multiple in and out of the Varied items dialog5. What business value would your suggestion represent for your organization?removing wasted time. sizing a zip tie takes 10 sec vs. 2 minutes.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.PTC reseller. This idea was send to us by a customer that has previously used similar functionality in another cad package. @mneumueller 2. What version of Creo Parametric are you currently running?8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Mirror body geometry and merge it to the same body. This is currently 2 separate operations. First you have to mirror the body and then you have to use the boolean operation to join the bodies. 4. What is the use case for your organization?When you model half the model you might want to mirror the body for the other half. When you have multiple bodies you want quick way to mirror them to create the other halves of the bodies. You can select the modelname in the tree and then select mirror and it will give you the option to join them o
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Construction industry, lead engineer R&D department.2. What version of Creo Parametric are you currently running?7.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.The measure summary window is always in front of the "All reference' window. Placing the Measure Summary window in the ribbonbar will solve this problem and also placing the the measure options in the ribbon bar is more convenient and in line with most other functions. 4. What is the use case for your organization?Saves time and frustration that the result of the measure is not hidden behind a window.5. What business value would your suggestion represent for your organization?Saves time and frustration.
Since Creo 2.0 we´ve been waiting for an undo (ctrl+Z) option on cabling.Everytime you make a change on cabling application and you want to undo it, it is no possible.In my opinion this would be one of the most expected enhancements.This would be really usefull in case the bundle crashes, just by undoing would allow us to modify it really quick.
Today there is no reasonable possibility to create solid geometry of cables or harness parts.PTC only refers to a workaround by using other data exchange formats:CS41458 - Thick Cables or Wires are not shown in Shrinkwrap format after exporting from Creo ParametricCS66555 - Export of thick cables does not work for for interfaces such like IGES, STEP, CATIA V4 (.model), ACIS, Parasolid, UG in Pro/ENGINEER Wildfire 4.0But this workaround breaks the parametrization and thereby is not a preferred solution.PTC should provide a better possibility (parametric) to create solid geometry of cables/harness parts!
1. I am a Creo administrator. We are currently resurrecting some old (1996) product designs. The engineering community wants to know how to replace holes created using extrude and holes created using the old legacy "slot" function with standard holes and NOT break placement constraints in upper level assemblies. Using standard holes is highly desirable due to current callout standards and to ensure the correct geometry size is used.Example: Legacy Extrudes Example: Legacy "slots" 2. We are running Creo Parametric 7.0.3.03. Reference PTC case: C16226666 confirmed that there is no conversion/replacement technique in Creo. Recreating the features as holes breaks placement constraints in upper level assemblies.4. The process of resurrecting these products would increase time to clean up the models and their reporting assemblies and delays in design modification and release.5. If there was a conversion or replacement method that would also retain plac
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry: Electrical equipment Design. Role: MCAD Support 2. What version of Creo Parametric are you currently running?Creo Parametric 6.0.5.13. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Axis disappear in the MBD flat state if they were created before Creo 6. By checking the Supplemental geometry box in the flat state this causes the issue. PTC changed how this feature works and now it causes more work for the user to remove any axis in the tree and then they have to recreate them and add them back into the state. This adds time to every model. Users will not know that they have to fix these models every time they open a previous version file if the box is checked. Need to fix this by setting the function back to the original way it was done in Creo 4.0 and below, as current fix now has cau
I am a software developer in the company that develops auxiliary applications for PTC Creo Parametric.We are working with PTC Creo Parametric 4-8 and the corresponding C++ Toolkit API.Our goal is to keep the same presentation of annotations in 2D drawing views and 3D combined states.C++ Toolkit API does not allow to check appearance of surface finish symbols on the drawing (according to the articleCS21326):It is not possible to detect on what drawing view a model owned surface finish symbol is displayed.It is not possible to collect drawing owned surface finish symbols and detect their drawing view too.Currently, our users have to check the difference in surface finish symbols appearance in 2D and 3D and fix it manually.API extension is requested to automate this process.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.The organization where I work is in the manufacturing industry.In the organization I am responsible for the CAD and PDM system administration as well as for the Toolkit development.I support about 300 Creo Parametric users. 2. What version of Creo Parametric are you currently running?We are currently working with Creo Parametric 7.0.6.0.3. Describtion of the ideaTo allow standard header files such as ProToolkit.h to be easily used in C++ code files, they all contain the PRO_BEGIN_C_DECLS and PRO_END_C_DECLS macros defined in the ProANSI.h file.The non-default header files from the directory <Toolkit_directory>\protk_appls\includes do not contain these macros (except for the four files GearDesign.h, TestError.h, TestSleep.h and UtilTypes.h).Therefore, in my opinion, it would be an easily implemented improvement if the macros PRO_BEGIN_C_DECLS and PRO_END_C_DECLS
I'm a Senior CAD engineer (Creo 8.0.1.0) and I would like to suggest a change that could be helpfulSince Creo 7, the Design Items folder has been added. The folder is very convenient, and I would be happy if it would also included the "Sections" folder Instead of appearing at the end of the model tree.I added a screenshot for illustration:Regards and Salutation
In part mode, the majority of the editing functions (model tab -> editing group) are not available unless you have already selected the relevant geometry beforehand. This should not be necessary and can waste time in some cases. A better approach would be that selecting these functions automatically modifies the selection filter to corresponding acceptable geometry. For example, to use the extend function I currently need to first select a quilt's edge and then I can click on the function. But my goal was to select all tangent edges using a rule-based selection in the extend function, so I need to go reselect the edge in the function anyway. If I could start with the function, I would save the first selection of the edge. It may not appear much, but it can stack up!
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am the engineering manager in a heavy machinery manufacturing business. Our stakeholders are mechanical designers, process engineers and assembly staff. Our industry is quite low volume (approx. 100 machines per month) but very high mix (several billion possible combinations of an assembly based on options on the price list).2. What version of Creo Parametric are you currently running?Creo Parametric 8.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.To integrate properly with our PDM Link installation we need to add parameters to the process plan file, which are mapped to IBAs in Windchill. We also need standard views to be available, e.g. Front, Left, etc. so that when we are creating a drawing showing the steps that are required, we can easily create the required views. Because there
Subject: RE: PTC Case 12621353 Offset lines editing in an exploded stateMike, Thank you for responding. I do not have a problem with the “Offset Lines” if I save the state of the model. I have the issue of when I replace a part in the assembly for which an “Offset Line” is attached. They are marked with a yellow triangle in the model tree. The option of changing a reference is not available. I was just going through this exercise just as your email came in so it is fresh. I do not get the chance to reroute the reference to the NEW cylinder surface; I must delete and re-create them. I am working with some older assembly models that have incorrect threaded insert models in them. The more I do this, the more I avoid “Offset Lines” but I get over ruled by the reviewers of the assembly drawings. So I must put them in. Please, do an experiment with them by saving a configuration then replacing a part with a new part and see what happens? Mikes response: Hello Je
Multi segments thin protrusion – Enhancement request Requirement:Ability to create multi segments thin protrusion, for example: These segments can be stand alone, and/or crossing each other, and/or chained as demonstrated in the upper figure. Usage:One frequent usage is EMI walls for RF cards. Current Creo limitation:Creo does not support un-chained entities or crossing entities.Creo RIB is not a solution since it extends the entities for example: And also fails if add entities as follows (see attached file) And also, to use a RIB you' must create an artificial fence around the face.C create a RIB on just planar face.Attached a SOLIDWORKS file that presents the requirements:
Today when you use the "Note from file" the start directory is the wrokspace/work directory, instead of the directory set in the pro_note_dir.To get the pro_note_dir you have to click on the "Note text Directory" folder under common folder to get to it.99% of the time you whant a note from the directoy not a note saved only in the workspace.Therfor the "Note from file" should start up in the pro_note_dir.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Agricultural Machinery. Software Engineer 2. What version of Creo Parametric are you currently running?Creo 7.0.4.13. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I am calculating the Bounding box using Toolkit API "ProSolidOutlineCompute". It has a way to exclude some of the features but is limited. More feature lists should be added to exclude the list ProSolidOutlExclTypes.Also, the API name says Solid outline but includes nonsolid items, and PTC is not ready to accept this as an issue.4. What is the use case for your organization?Calculate the only SOLID bounding box which matches with Creo view bounding box.5. What business value would your suggestion represent for your organization?Calculating the accurate bounding box which matches with Creo view.
According to article CS 263061 (https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=16208543) it only possible to update a merge feature by edit the definition, change update type to "Automatic", exit definition, regenerate and then set it back to "Manual". This is extremely uncomfortable and time consuming, there should be an update function in right mouse menu.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I create models of cushions for on and off road vehicles. I take sketches from an industrial designer and make a model for manufacturing to use for ordering a mold from a mold maker 2. What version of Creo Parametric are you currently running?7.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When working with boundary blends, Control Points are used to control surfaces created between curve sets. Many times when modifying or replacing a curve, the control point sets need to be updated and sometimes it is easier to start over. The tool does not allow for Remove All as seen in most other tools with similar lists. 4. What is the use case for your organization?I would like to be able to remove all sets of control points in the boundary blend. Removing them one at a tim
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am a Mechanical Engineer and I am working as technical support engineer in GMMSPL for PTC Creo2. What version of Creo Parametric are you currently running?Creo 8.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images, or videos.I am having an issue while drafting the assembly/model having welding feature which not able to identify as it has the same behavior as regular part drafting. So is there any way to make the welding solid in drafting so that fabricators identify it quickly?Currently, we use hatching but it is a tedious process and time-wasting.Our many more customers from solidworks and solidedge, asking that to have the same but more intelligent feature in Creo for the same.4. What is the use case for your organization?Fabrication drawings contain a huge amount of welding features and for each
Requested functionality does not exist in Creo 6.0Enhance 3D Thickness Analysis1)Needs a color map and show different colors for different thickness. Need a visual of all thicknesses instead of just Minimum, Neutral and above Maximum.2)Make colors apply through-out the geometry not just on the outer surfaces. Allow dynamic sectioning after the computation so user can move through the model to view analysis.3)Improve performance, takes a long time to run4)Add Default Reference of SolidGeom5)Keep 3D Thickness Analysis active until closed by user, so other tasks can be done at same time (measure, section).Reference https://geomcaliper.geometricglobal.com/
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Metal stamping company, we develope metal stamping tooling. 2. What version of Creo Parametric are you currently running?7.0.43. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. While drawing surface design, we need to create simplified versions of surfaces, and then extend them. Generaly we need to create a copy, and them Untrim to envelope, after there is a need to create an extended feature, for the edges. What I propose, is make a feature that makes this diretcly. see the NX way, that I think it's quite interesting. https://youtu.be/TAA9d9w26mQ?t=64 4. What is the use case for your organization?Surface design5. What business value would your suggestion represent for your organization?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.