Skip to main content
Apr 4, 2012 2:18 PM UTC
Clarification Needed

Don't auto-update view orientation

Related products:Creo Parametric

Remove or disable the code that changes the zoom / orientation / pan, for example after changing cross-section or regenerating.  The model should stay where I last put it, not disappear off the edge of the screen.

22 replies

Aug 14, 2014 5:59 PM UTC

Well, you see David, it's actually like this... of course you wouldn't know this but there's an invisible painted line on the ground in the PTC staff parking lot that ends to about 20 feet away from the CEO's XJ. You can't see it but it's there. Just before lunch some gremlins painted an extension on to the invisible line so now it ends a couple of miles away in a football field. So naturally the cars are all parked in the field. Except of course the CEO's. That would be inconvenient and hence not allowed.

Jul 30, 2015 11:01 AM UTC

Well, I thought it had reduced in Creo 2 but no, it's doing it all over the shop today.  I'm iterating just one dimension value (so it's in the same place on the model every time) and whenever I change and regenerate, it flips the model round to a completely different view.

Stop it!!!

Jul 31, 2015 8:53 AM UTC

Now, what's really strange is that I didn't think it had been doing this over the last couple of weeks, but yesterday (when I posted my comment above) it definitely was.  Today it seems to be fine again!

Nov 10, 2017 3:10 PM UTC

I was coming here to post the same idea.  My company just upgraded to CP4 M020 and it still behave like this.

 

My main issue is with switching between simplified reps which causes the model to pan to a different location on screen or off screen altogether.  I like to take sets of before/after screen shots of to show differences/changes between models.  If you take those pictures and place them on seperate presentation slides, but in the same location, flipping between the slides is a great way to visually summarize complex changes/regions for people not involved in the engineering.  The problem is when I switch simplified reps and the model pans somewhere.  In order to do the above I have to take a screen cap of same screen area with the model in the same location.  This behavior complicates what should be a simple rep switch and screen shot.

 

I think the root cause here is different model envelopes between simplified reps.  The view center seems to be relative to either envelope size or envelope center.  Because of that, making a view orientation or combined state doesn't work because the view orientation changes with the model envelope.  I think the view center should be relative to a fixed top level coordinate system instead.

 

My workaround:

I created special part which only contains an extremely large extruded square profile.  I sized it so it's sure to be larger than anything in my top level assembly.  I created it as a surface and hid it on a layer.  I'll include that part in simplified reps and when I switch between two which contain it, nothing moves.  It work, but I don't think I should have to do this.

 

Jun 14, 2018 6:17 PM UTC
Status changed to: Acknowledged
Jun 26, 2020 1:13 PM UTC
Status changed to: Clarification Needed

Note: as it relates to 2D there is also the config option: sketcher_refit_after_dim_modify no*/yes


With the improved behavior in recent releases, and reading the various posts, can the remaining issues be summarized with:

View definitions should allow for a user-definable center & zoom-level which don't update automatically

or are there other remaining situations with unwanted auto-update of view orientations ?

 

Aug 30, 2021 1:41 AM UTC

I'm still using Creo 3 and this is a huuuge time and energy waster for me.

 

Has it finally been addressed? If so which release fixed it?

Community Manager
Aug 30, 2021 5:25 PM UTC

Hi @MaCallan @LndoVnBtchmrk and @JonathanHodgson 

 

I think the PM was looking for some follow up to the question "are there remaining situations with unwanted auto-update of view orientations?

 

Can you please elaborate on "this is a huge time and energy waster?"

Aug 31, 2021 10:51 AM UTC

Hi @Jaime_Lee ,

 

I've just asked around here, and one user reports "I've definitely had it happen a few times recently, but it's also not every time" in Creo 6.0.5.1 (have the Mxxx versions been replaced recently?). He says "I was regenerating an assembly and it kept flying off the screen."

Aug 31, 2021 1:32 PM UTC

The versioning of Creo changed in March 2018 when Creo 5.0.0.0 was released. No more Mxxx releases, they are now M.0.x.0 releases, replace the M with the main release number (5, 6, 7, 8, etc). Windchill changed to this numbering with 11.2 in June 2019.

There used to be an article on the web about the naming change, but I cannot find it.