Skip to main content
Feb 2, 2022 2:47 PM UTC
Acknowledged

CREO scale bodies

Related products:Creo Parametric

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.

Metal stamping company, we develope metal stamping tooling.


2. What version of Creo Parametric are you currently running?
7.0.4

3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.
Scale bodies and quilts, should be enhanced.

Scale the whole body or quilt, as a scale factor for all axis, or special scale factors for each axis.

4. What is the use case for your organization?
Create some deformation, for bodies and quilts

5. What business value would your suggestion represent for your organization?


7 replies

olivierlp
Community Manager
Feb 2, 2022 2:49 PM UTC

Hello, 

Thank you for your idea and the information you provided. However, I would encourage you to provide details on the question #5. The more contextual info product managers have, the better. 

Olivier
T_FAuthor
Feb 2, 2022 6:26 PM UTC

5. What business value would your suggestion represent for your organization?

Need of improvement in usability of scale body. Actual workflow, not easy to use!

Feb 3, 2022 8:00 PM UTC

Should not have to purchase Tool Design Extension just to scale non-uniformily.

 

olivierlp
Community Manager
Feb 3, 2022 10:49 PM UTC
Status changed to: Acknowledged
Olivier
Feb 14, 2026 8:31 PM UTC

Hi @T_F 

You can do it with Flexible modeling offset

Feb 16, 2026 3:10 PM UTC

If it is possible to scale non-uniformly with the Flexible modeling offset feature. Please provide details in how to accomplish this.

Feb 23, 2026 11:07 PM UTC

I think it's not possible as @ProFeature suggested.

 

The Flexible modeling offset would use the same value as offset distance for all the surfaces. But for a real scale operation, the offset distance value depends on the distance to the scale origin point. the closer the surfaces to the scale origin point, the smaller the offset distance. The further away the surface is, the bigger the offser distance will have to be.

 

What I think makes this possible, is with the Warp feature with a Stretch operation. But the problem with this method is that we have to add a Stretch operarion 6 times (2 per axis) and even with only one Stretch operation, the surfaces become non-analytical, meaning, there will be no more cylindrical surfaces on the body, although the planar ones are preserved. For certain uses cases it might not matter, for others, it's an inconvenience.

 

In our case we use the Tool Design Extension which has a parametric Shrinkage feature (uniform on non-uniform), but this applies for the whole part. We don't have the granularity to apply it per body, although sometimes we need it when we try to make a mold for a plastic part with metalic inserts, since the scale or shrinkage factor for the plastic part will be higher than for the metalic inserts. If we could do scalling per body, we could do it in a single multibody part. Since we can't, we have to rely on assemblies and use different PRT files for each for the plastic part, and for each metalic insert, to be able to apply different shrinkage factors to each one of them.