Skip to main content
Apr 5, 2012 3:57 PM UTC
Acknowledged

Allow fillets (rounds) & chamfers in assembly mode

Related products:Creo Parametric

Allow fillets in an assembly! If you are doing cuts in an assy, and then want to fillet an edge in that cut, you should be able to do so. I realize that a fillet ADDS material, but in real-life, if someone is machining an assy, they can add a fillet after a cut operation. Fillets should be the last op to any machining, but if machining in an assy in Pro/Creo, you can't do it.

18 replies

Nov 19, 2015 7:28 PM UTC

I'm battling with this as well. I have many holes that need to be bored at an assembly level, after which they require a chamfer.... Can't believe that this feature isn't available.

Jun 14, 2018 6:11 PM UTC
Status changed to: Acknowledged
Community Manager
Sep 19, 2019 7:14 PM UTC

Allow fillets in an assembly! If you are doing cuts in an assy, and then want to fillet an edge in that cut, you should be able to do so. I realize that a fillet ADDS material, but in real-life, if someone is machining an assy, they can add a fillet after a cut operation. Fillets should be the last op to any machining, but if machining in an assy in Pro/Creo, you can't do it.

Jun 9, 2020 10:33 AM UTC

I thought this was possible if you had the advanced assembly extension , I'm sure I've done this when creating a machined castings, the usual way I do it is to put the blank casting into an assembly then add the machined features.

Does anyone know of another method.

Nov 15, 2020 12:37 AM UTC

If not adding, allow removing chamfers and fillets on assembly. It should not be too difficult to add to programming code an algorithm to detect if internal or external edge is selected. So many other useless addition are passed as improvement yet this is missing since at least version 2

Nov 16, 2020 11:40 AM UTC

Some of the use cases mentioned in this idea can likely be handled with Multibodies now.

Jan 8, 2021 6:35 PM UTC

This idea is LONG overdue. Also, if you are machining a large assembly, it can't be done with multi-bodies. Managing BOMs with multibodies is also new and we would prefer to just keep it simple by having the model tree generate the WTParts in Windchill.

Sep 13, 2022 8:02 AM UTC

In my line of work, there are numerus places where you would do machining and drilling after welding the parts together. The edges are then chamfered or filleted. I cannot see why PTC cannot make this only to remove material in the same manner as when you create an extrude and it only allows for material removal.