Ability to rotate Projection and Auxiliary drawing views (same as General views).
1. Describe the Problem
Creo has the ability to rotate the orientation of General views; however, Projection and Auxiliary views do not have that same functionality. Creo makes it easy to remove the alignment of projection and auxiliary views and create correctly-oriented projection arrows which aligns with ASME Y14.3's expectations for Removed Orthographic Views. There is no way in Creo to rotate these projection and auxiliary views to create Rotated Orthographic Views described in ASME Y14.3.

2. Are you using a workaround?
Yes. As described in Workaround 1 of PTC Article - CS18619, users have to switch the type of view to a General view which will allow rotation. They then need to manually recreate projection arrows used for Identifying Removed Orthographic Views as defined per ASME Y14.
3. What is the use case for your organization?
Efficiently meeting the expectations for Removed Orthographic Views, Identifying Removed Orthographic Views, and Rotated Orthographic View documented within ASME Y14.3. Refer to attached image of Fig. 6-4 from ASME Y14.3.
4. What impact does this problem currently have on your organization?
It is extremely inefficient and error-prone to use the workaround described above. Turning a removed projection or auxiliary view into its own general view loses parametric connectivity to the parent view used for Identifying Removed Orthographic Views as defined per ASME Y14.3. Any generated projection arrows are lost and have to be replaced by a simple symbol that is placed on the drawing and manually oriented to display the correct angle of projection. Using a general view eliminates the ability to display a parametrically driven view note/label (unless one already existed for the projection or auxiliary view prior to changing it to general). There is also not a way to parametrically connect the display of view name in the projection arrow symbol to maintain connectivity with the name of the view, so a user has to try and manually keep the view name annotation and projection arrow symbol in sync during creation and future revisions. Desired functionality already exists with General views, so this is thought to be a lower effort change with significant efficiency and quality gains.
