Recently active
Welcome, Manufacturing Professionals! This is your area to have roadmap or "future" possible feature conversations among your peers. Please continue to have how to and conversations that help with Creo product adoption on our "public" Creo forums. These should be outside the scope of the “how to” discussions happening in the public Creo Parametric boards.
Hallo zusammen,wir sind gerade auf die Creo 6 umgestiegen und im Drehen gibt es jetzt die Möglichkeit mit 4 Achsen zu drehen.Diese Möglichkeit scheint für uns interessant und die bei uns eingesetzten Dreh-Fräsmaschinen beherrschen diese Möglichkeit des schwenken der B-Achse während der Bearbeitung.Hat jemand von euch schon Erfahrungen mit dieser Bearbeitungsstrategie? Grüße DVianden
Hallo Zusammen, wir haben aktuell ein Problem beim Drehfräsen für das ich keine Lösung finde. Vielleicht kann mir hier jemand helfen. Ansonsten wäre es für mich gut zu wissen wer noch alle Interesse an einer solchen Funktion hat, um auf PTC zugehen zu können. Thema ist folgendes: Wir würde gerne eine Außenkontur mit einem Fräser stirnseitig bearbeiten. Den Fräser mittig stehen zu lassen ist nicht möglich, da hier das Werkzeug nicht schneidet. Die einzige mir bekannt Möglichkeit ist, beim Schnittlinenfräsen das Werkzeug um einen Winkel zu kippen. Leider hilft das auch nicht weiter, weil dadurch die schneidende Linie an den Rand des Werkzeuges geschoben wird. Somit werden die Wendeschneidplatten schlecht ausgenützt. Optimal, und in anderen CAM-Systemen auch möglich, wäre es das Werkzeug "zu verschieben", um dadurch die optimale Bearbeitung zu ermöglichen. Weiß jemand eine Lösung für diese Aufgabe? Fräser steht senkrecht auf zu bearbeitender F
Hi All, Something that comes up all the time with some of our long time users is Patterns/subroutines for nc sequences. Sometime in the past, there was an option like "rotate A" or "rotate C". Example: Let's say you are drilling a pattern of holes around a circular flange surface. Rather than pattern and output all individual X,Y moves on the machine, you'd select "rotate C" and the machine table (C axis) would rotate the necessary degrees between each hole.
Hi all, As quite some people already asked me.... please find attached a PPT describing the ncmenuoptions.xml file. BR Beat
Make it possible to set by a parameter when the tool is needs to be changed. After x-cutting material the tool (inserts) need to be changed. With special materials like INVAR it needs to be possible to set a tool change point. The change of the inserts before it is to late can save a lot of cost. at the moment the tool cut way can't be controled. Manual tool change points can be set but only on manual picking points without relation to the length of the cut path.
Dear Community members, Please find the presentations of the this years meetings from June 5th and 6th under the following link: https://pds.ptc.com/Windchill/app/#ptc1/tcomp/infoPage?oid=OR%3Awt.folder.SubFolder%3A1370356367&ContainerOid=OR%3Awt.projmgmt.admin.Project2%3A906793667&u8=1 You need to be registered at PTC to access the presentations. Regards, Beat Fretz
Hello together, the 05.06.2019 will be the date for this yes subtractive manufacturing meeting in Augsburg. One point on the agenda, just like last year, will be a possibility for customers to address enhancement topics to PTC. So PTC will give some information to the open points from last year at this meeting. Last year we have some stuff from TOX, Brasseler, VK Engineering and MAN. So if someone is interested to make a short presentation in this agenda point, feel free to contact me. Actually there is half an hour planned, so there is place for maybe 5 topic’s. I will write from MAN side some things about thread turning
Dear visitors of the MFG Meeting in Unterschleißheim, Please find the presentations here: https://pds.ptc.com/Windchill/app/#ptc1/tcomp/infoPage?oid=OR%3Awt.folder.SubFolder%3A1349241088&ContainerOid=OR%3Awt.projmgmt.admin.Project2%3A906793667&u8=1 BR Beat
Be able to add the xml template name in a fam table. At the moment this is not possible since the template name is locked. Therefor a UDF with a fam table needs to be broken in to individual UDF's. On extraction the default should then refer to external templates (to get the latest template from disk and not the one stored in the UDF)
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.