Topics around BOM and BOM Editor.
Recently active
Hi - I'm a very fresh newbie so hopefully an easy question... I have generated some 2D geometry and want to export it to IGES (or STEP).When I go to File/Save I do not see the IGES or STEP option under file type - any ideas? An associated issue perhaps - the 2D geometry sits on the active workplane do these need to belong to a Part for export, and if so how? I'm using Direct Modelling Express 8.0 thanks
I have a file that has a long tree of features. One of the early features has a sketch geometry extrude. It has a pattern of three spots. I want to undo one of the three areas and select another pattern. How is this done? Right clicking on the feature or the sketch doesn't give me any options.
Hello community members, This is my first post on this forum. So i hope this place is somewhat active.I have an issue where my assembly is loaded many meters away from the origin.I can fix my issue by moving the parts within the assembly to the origin.But then a more annoying problem arrises.Now my origin is correct when loading in the model. But when I go to create a view in my 2D drafting environment, my origin is now still at the original location.And my view becomes hard to allign to other views. So my question is: When and how is the model origin decided? And can I change this within an existing model that is saved in a database?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1.PVZ is made with modeling worker.2. What is the problem?Modeling has a special feature – “selective independent”.A PVZ cannot process this information. 3. Are you using a workaround? If yes, please describe it.No workaround possible.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If using an assembly “A” two times in assembly “B”, you can show/describe with the feature “selective independent” different positions of the parts in assembly “A”. This information is stored in assembly “B”.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)All visualizations of new and migrated objects are wrong.People in production have no chance to view the correct situation.
Im using Creo Elements Direct, when i press this part the cursor is not straight.Can i change this?
1. What product and version are you running?We have customers from CEDM 20 to 20.62. What is the problem?When adding a lip in to a plate when there is a big assembly loaded into Modeling, Modeling reacts very slow to these action. Same as adding a workplane etc. This is a huge performance issue.There is already a case logged for this: Article - CS391325 - Adding a lip leads to a poor performance in big, large assemblies in Sheet Metal in Creo Elements/Direct Modeling (ptc.com) The designer needs to wait until this command is done before he can proceed working. We had examples that a designer needs to wait 20 seconds before continuing. This is something that wasn't a case in version 17-18.1 and came in on version 19.3. Are you using a workaround? If yes, please describe it.No, there is no workaround when working with big assemblies.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Th
Hello, Is is possible to make a drawing in Creo 9 of an assembly made in Catia v5? I'm making an component for a client. The component consists of two sheet metal plates that are cut and welded together and then applied a gasket. An assembly in Catia contains solids and surfaces that represent the plates and welding paths. I modeled the components in Catia v5 r28 and the customer uses Creo 9. The advantage of having it in creo would be that the client can open and edit the drawing directly. But I assume there is some loss in reliability and functionality when working across softwares like this.
In previous years i could easily log into Creo Elements Direct Express 6.0. But for the last year or so it is very haphazard, and only can be accomplished by accident. I can ask for a new authorization, which does not usually work. And somehow I obtain a temporary ability to log in. it often says "cannot access internet connection". But my Norton 360 firewall shows access allowed for this software. Please,, how to correct this. I'm guessing it has something to do with windows 10, or Norton 360 security.
As per this topic Having similar issue - I can get the 72 hour key, but I've had to do it for like 3 weekends straight now. This is the longest run ever, in about 5 years of using this product I can only remember single weekend outages in the past. Creo, gents! You offer a fantastic free use product here - but locking us out when the phone-home connection doesn't work for nearly a month is going to make me finally consider thems other guys I otherwise hate (Fusion, cough). Please don't make me do that. If keeping a license server active for a free product is too much of a drain, please consider a reasonable hobby-tier purchase! I'd be willing to pay a Benjamin or so for an annual, local license key.
Please include detailed documentation such as screenshots, images or video.When Installing multiple versions of Modeling / Drafting / ModelManager, there is usually a preferred version, where the file type associations should point to.On installing a version, all file types are registered for this version and have therefore to be registered for the preferred version again.On uninstalling a version, all file type associations are removed and have therefore to be registered for the preferred version again.1. What product and version are you running?20.3.4.0, 20.4.4.0, 20.5.3.02. What is the problem?File type associations have always to be registered for the preferred version again.3. Are you using a workaround? If yes, please describe it.Registering file type associations multiple times.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We always install a new version on all PCs in the company an
I have been trying to install Creo 7.0 for a while, but keep getting a loading icon that disappears after a few seconds.I have tried running as administrator, disabling firewalls and antiviruses, and deleting all previous licenses and things off my computer (all at the same time). Does anyone have any insight?
HiWhen I create a section view in the drawing the hatch will create for regions that are not necessary and these regions are part of cut exclusions in standards. What should I do to prevent cut exclusions in drawing when I create a 2D draft and section view and prevent hatches on these regions?
In my company I have to draw some pieces that are similar to others. GD&T is very important so we use as reference a similar part to take those tolerances into account and to know what to annotate and what not to. Is there a way to make an automatic drawing or a drawing of a part using the similar part as reference, automatically? Even though I have to adjust some details it will save me a bunch of time.
Hello friends, In Creo Elements Direct Modeling 19.0, how can I measure distance between the axes of two holes?Every time when I want to measure the distance between axes of two holes, I only can get the minimum distance between two holes.
I have a fairly simple drawing with a repeat region showing mass properties (see attached screen dump)I have one column for the total weight (part weight x rpt qty).To avoid adding assembly weights to the parts weights, I have set the assembly weight to zero and the column only list the parts' weights.The total wight of the main assembly is calculated separately and listed in the drawing head asTotalvikt = 154,02 kg.When I add the weights in the column they add up to the same as Totalweight which is what I would expect.However, when the repeat region summation does the same adding up it gives the result = 93,05 kg.I have tried various assemblies but there is always a difference between Totalvikt and the summation result.I have not been able to find any logic between the two different results.Can somebody tell me what is wrong?I am using Wildfire 3.4HELP!!
Hello i want to add new sizes for threaded holes. For example i only have until M16x2 and i want to to do a M24 hole. See picture below.
Hello,i am new to engineering and tend to get the simple yet difficult things confuse. If you ever have a parent/children drawing for updates, whats the best way of remembering it?Ex: if you have a casting drawing which is referenced on a machined drawingEx: if you have a complete finished good along with packaging and let's say a sub component in a finish good changes, will it rev up packaging?in theory, in my assumption.. if a parent is affected, all children gets affected.. if a child 1 gets affected and there are other children underneath it... the parent won't get affected but anything under child 1 will. Please help with feedback. I appreciate your time and efforts
I will rendering an animation... and i will use FFmpeg....In the Help-Center is only this litte text.... Add an AVI codecSeveral AVI codecs are defined in the customization file ani_customize, which is found in <installationdirectory>\personality\sd_customize\AdvAssembly_Parametrics. You may add a new codec to this file if desired. Please review the comments in the file for more information. Now in the "ani_customize" i will add FFmpeg to creo.... but it dosen't work... FFmpeg is installed on pc. How does it works? Any tutorial available?? Here the code lines:;; customize the AVI codecs available for save animation (codec must also be installed on PC);; First string is the 4 character code (i.e. "MPEG") - second any description;(anim-add-avi-codec FourCharacterCode Description)(anim:anim-clear-avi-codecs)(anim:anim-add-avi-codec "FFMP" "FFmpeg")(anim:anim-add-avi-codec "MSVC" "Microsoft Video")(anim:anim-add-avi-codec "DIB " "Uncompressed") I hope
Hi, i am Creo elements/Direct Modeling Express- beginner.I want to move the 2D drawing on the 1st workplane to other workplane, so that I do not have to redraw it.Please somebody teach me how!
The existing rendering module in Creo Elements/Direct Modeling is from Lightwork.Lightwork was acquired by Siemens in 2018.Nothing has changed in the rendering module for several years and the possibilities are limited.My suggestion is to replace Lightwork with KeyShot, analogous to Creo Parametrics.
I want to change the origin of my part to the opposite side? Creo/Elements Direct
If I have Creo Elements Direct 20.3, can I set 20.1 as default file version?
Hello there,I would like to ask if its possible to change structure browser of Creo Elements/Direct modeling(20.5.1.0) to different color please. It is very eye tyring if used on daily 8-10 hours basis.I have managed to change Ribbon UI with command: (uib::win-set-skin-style :black). I tried to look through Creo files but couldn't really find clue for structure browser.This background of structure browser: I dont mind paying for this information, or if it requires some custom code creation.Thank you very much.
Hello Everybody!Is there a way to convert Creo 9 part file to Creo 8 part file with model tree?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.