Topics around BOM and BOM Editor.
Recently active
Today, it is impossible to make change to a library part from ModelManager, whatever the access right the user have. There are cases where it is necessary to make a change : - Type mismatch in the table of the standard library parts (screws, nuts, ...). - Changes in the Company library parts. - ... Members of a special groug (eg LibraryAdmin) should be able tomake change to a library part from ModelManager.
when you have masterdata moved into other masterdata, in the BOMeditor this is marked as manually managed item automatically. it would be usefull if Modelmanager generates a message to indicate this action is made, so the user is conscious about this action.
As IP security is becoming a larger and more complex issue in regards to how we access our engineering data globaly, it would be very helpful if Model Manager / Drawing Manger would you have the ability to utilize a third party multi-factor authentication when the user logs into the application, such as using a RSA SecureID device and software.
Searching Model Manager data selecting the owner or last updated by, you may entre a user name. It would be nice to extend for a new policy where you may enter a group name. And then all elements owned by any member of the group may be retrieved when selecting a group name in owner field. The same for last updated by or lapproved by or any other field requiring today a user name.
Model/Drawing Manager should offer to the user more query capabilities, to address for example: - select value range (ex: Diameter <= 100, or LASTUPDATE_DATE > "2012/07/01") - manage AND and OR (ex: [Diameter <= 100 OR [Material = "Stainless*" OR Material = "Inox"]])
Since Modeling 18.1 the viewport setting invert elements no longer works for the CoCreate Color scheme. (It still works for the Creo Color scheme). This implicates that black lines are no longer inverted to white lines in annotation. This can make a drawing a lot harder to read. This problem manifests itself when ancient drawings containing black geometry lines are opened in modeling 18.1 and is especially problematic when black lines are used in titlecorners and text. (See images below). I hope this setting is reactivated in a new date code of Modeling as to me this is a necessary setting.
Hi, I would like to clear my doubt about the text frame option available in dimension properties. I would like to know whether the balloon frame which is shown as a closed circular frame is used for the reference dimensions in creo element direct modelling because in standard practice the frame for the reference dimension is of open circular brackets. Thanks, Regards, Anand
Sometimes the 3D copilot is not in the centre of the part or assembly. When I delete the viewsets in the part the copilot is in the centre again.Is there another way to solve this issue?
Search text and Search dimension should be available (and works !) in 3D & 2D Access, i think. That should be well in this products
I want to start Direct Modeling 19.0 M070 on a small Laptop with Intel UHD Graphics 620. Result: VP '1' is blocked and i get an sigsegv-Error. Is there any possiblity to start Modeling, most for viewing on the System. Are there any start-Options to let modeling know he has to work on an low-Level-Graphics-System?
We have serious problem converting DXFs to .mi, which is a standard in our organization. When we import a DXF, with main scale lets say 1:5, it is imported as 1:1. So when fixing existing annotations, or applying new annotations, all the dimensions are reduced 5 times. It is not possible to rescale with PART_DRW_SCALE '~A' 0.2, because it is not just changing scale, but transforms the drafting along with it. And it is finishing deformed, and still reduced 5 times in values. What We need is just make all the values 5 times greater, to conform original dimensions, without deforming the drafting. P.S. I tried tweaking PTC\Creo Elements\Direct Drafting 18.1\dxfdwg\DXFDWG.con It has no effect on "x times scaling". And the "mm" units are correct. # DXF/DWG to MI Translation Switches StartSection DXF to MI Translator PolymarkerType 2 TranslateDXFPenLineSize 3 TranslateInvisibleLayers OFF CustomUnits ON Units mm UnitsScale 1.0 ContourSnapGap 1E-12 Hatch
Hello everyone, I am experiencing an undesiderable behaviour in CEDM 18: I start moving a face clinking on it, then click on the orange arrow, dragging mouse, on release I expect to see red and green arrows to specify relative quote. These arrows are visible only for a blink of an eye, then they disappear again and the orange arrow (face selection) is shown again. Any idea on how to solve this issue? Thanks!
Hi, I work with Creo Elements/Direct Modeling 18 on two different machines. One of them lists STL in save>file type while the other does not. The software version is the same, the model I'm working on is loaded from the same pkg. Any ideas? Thanks a lot!
Hi We need to delete multiple sheets in Annotation. We have Models with up to 35 Drawing-Sheets. Many thanks Urs Ammann
Hello, Please let me know, if there is a same option such as Intelligent Fasteners in Creo 2.0 . If yes, please let me know how to activate that module. Also, is there a method to Extract Fasteners details of a assembly, without assembling the Fasteners in the assembly. For Example based on the Type of hole sizes in the Model.
Hi, Can anybody help me out for adding custom frames in CED Annotation file? I tried the method suggested by PTC Tech Support but did not work in my case. I tried below method of changing the am_customize file as below ;(docu-register-frame ; :UI-name "Custom-A3"; :Wm-name "" ; :file "C:\Custom_Frames\Custom_A3.mi"; :default :every time) ;; T/NIL/:every time But this did not work. Still the same standard Letter sizes and A0.....A4 sizes are showing. Please help....
Hello everyone, I'm new to Creo software and we need some advice on which software can work with our client's workflow. The client provides us with PKG files, we need to turn on/off visibility of components and then export it as STEP Files. We don't need modeling capabilities, and the client will like to avoid allocating time for the conversion process, and at the same time it's on our side to select what really needs to be exported. We tried the Creo View and the PKG file format is not supported. Is there any other option? What other format is lightweight and easy for them to save as from Creo modeling that we could use Creo View to export? Any guidance will be great. Thanks!
Dear all, regarding to PTC-article CS122349, i would like to suggest, that it would be a benefit, to create dimensions on every geometry which is shown in a CreoElements Drafting file. In the moment shared-shared parts can not be dimensioned but they are also part of geometry in a drawing. Best regards Sven Brüschke/Herrenknecht AG
Hello i just setup PTC Creo Elements Direct Modeling Express 6.0, I'm registred. But at the launch softwer ask proxy. After input no proxy i can get possibility to activate manuelly for 72 hours and software give me a code but each time the code isn't valide. Can you help me
Is it possible to update the BOM list automatic when a new part is inserted to the assembly? Now the users need to do the following: - Insert the part in the assembly (or a changed part) - Scan the BOM - Delete the old BOM - Place the BOM again on the drawing Isn't it simple the part is added to the BOM automatic?
Our current workstations have 32 GB of memory. When loading a large assembly from Model Manager I find that SolidDesigner appears to limit itself to using less than 10 GB of memory (see the first screenshot below). The wave pattern of memory usage looks like the software needs more memory but instead of taking memory that is available it is dumping some memory already in use. I have a new workstation that has 64 GB of memory installed but SolidDesigner still appears to limit itself to under 10 GB of memory when loading from Model Manager (see the second screenshot below). Is there a setting somewhere that is limiting how much memory Creo can use? I was hoping to see an improvement in load times with this new computer but I am not seeing improvement.
Product idea for dimensioning in Annotation: Please add multi line postfix in dimension tolerance type "Basic". We need this for multi language drawings.
If I create a parallel auxiliary line, I can select the line in Modeling and move it with the mouse. Then I see exactly the unit of measure dynamically. I can enter an exact measure and press Enter at the same time.The line is created. When I click on the button to create parallel auxiliary line in Drafting, I also see the measure dynamically, but I have to leave the command if I want to enter an exact measure. Double work. Could it possibly do the same as in Modeling?
Hallo lieber support, ich hätte mal eine frage. ist es möglich Creo Elements/Direct Modeling 19 als Studentenversion zu aktivieren? ich habe zwar das creo direct 4.0 aber das ist leider nicht das was ich brauche mfg Eduard
Hi, How can I export pcb componets to emp file from CED ? Because I exported Emn & Emp file from CED , I only see board and keepout. I couldn't find any componet export Below image Thank you
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.